A novel and convenient method for synthesis of carbamoyl and thiocarbamoyl phosphonates

A simple, efficient, and general method has been developed for the synthesis of carbamoyl and thiocarbamoyl phosphonic esters using CaCl₂ as an efficient Lewis base catalyst. Carbamoyl and thiocarbamoyl phosphonic esters were obtained in good yield (37%–65%) and purity under mild conditions by the reaction of diethyl phosphite with isocyanates and isothiocyanates in the presence of CaCl₂. This method is easy, rapid, and good‐yielding reaction for the synthesis of carbamoyl and thiocarbamoyl phosphonic esters. © 2009 Wiley Periodicals, Inc. Heteroatom Chem 20:250–253, 2009; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20538     

Density and viscosity of 1-butyl-3-methylimidazolium nitrate with ethanol, 1-propanol, or 1-butanol at several temperatures

Densities and viscosities of 1-butyl-3-methylimidazolium nitrate [Bmim][NO₃], and its binaries with alcohol (ethanol, 1-propanol, or 1-butanol) were measured at different temperatures. The densities and viscosities of pure ionic liquid were correlated successfully by empirical equations. The Vogel–Fulcher–Tammann equations can fit the experimental data of viscosities for pure IL. Excess molar volume and viscosity deviations were calculated for the binaries. The excess molar volumes have negative deviations from the ideal solution.     

Design of a highly efficient and water-tolerant sulfonic acid nanoreactor based on tunable ordered porous silica for the von Pechmann reaction

Among a number of different sulfonic acid nanoreactors prepared, 5 having both acidic sites and phenyl groups located inside the mesochannels of SBA-15 was shown to be the most active and reusable catalyst in the von Pechmann reaction. The mesochannels, and covalently anchored organic groups, provide a synergistic means of an efficient approach of the reactants to acidic sites, enough space for the subsequent cyclization, and suitable hydrophobicity to drive out the water byproduct.     

A class of supported membranes: formation of fluid phospholipid bilayers on photonic band gap colloidal crystals

We report the formation of a new class of supported membranes consisting of a fluid phospholipid bilayer coupled directly to a broadly tunable colloidal crystal with a well-defined photonic band gap. For nanoscale colloidal crystals exhibiting a band gap at the optical frequencies, substrate-induced vesicle fusion gives rise to a surface bilayer riding onto the crystal surface. The bilayer is two-dimensionally continuous, spanning multiple beads with lateral mobilities which reflect the coupling between the bilayer topography and the curvature of the supporting colloidal surface. In contrast, the spreading of vesicles on micrometer scale colloidal crystals results in the formation of bilayers wrapping individual colloidal beads. We show that simple UV photolithography of colloidal crystals produces binary patterns of crystal wettabilities, photonic stopbands, and corresponding patterns of lipid mono- and bilayer morphologies. We envisage that these approaches will be exploitable for the development of optical transduction assays and microarrays for many membrane-mediated processes, including transport and receptor-ligand interactions.     

Hydrangenone, a new isoprenoid with an unprecedented skeleton from Salvia hydrangea

Hydrangenone, a new heptacyclic isoprenoid with a 6/7/6/5/5 membered carbon ring skeleton, was isolated from the aerial parts of Salvia hydrangea. The structure was established by extensive NMR spectroscopic methods. The relative and absolute configuration of 1 was assigned by NOESY and X-ray crystallographic analysis and by comparison of experimental and calculated electronic circular dichroism (ECD) spectra. Compound 1 showed in vitro antiplasmodial activity, with an IC(50) value of 1.4 μM against P. falciparum. A plausible biosynthetic pathway of 1 was also proposed.     

Streamline bifurcations and scaling theory for a multiple-wake model

We investigate the interaction between multiple arrays of (reverse) von Kármán streets as a model for the mid-wake regions produced by schooling fish. There exist configurations where an infinite array of vortex streets is in relative equilibrium, that is, the streets move together with the same translational velocity. We examine the topology of the streamline patterns in a frame moving with the same translational velocity as the streets. Fluid is advected along different paths depending on the distance separating two adjacent streets. When the distance between the streets is large enough, each street behaves as a single von Kármán street and fluid moves globally between two adjacent streets. When the streets get closer to each other, the number of streets that enter into partnership in transporting fluid among themselves increases. This observation motivates a bifurcation analysis which links the distance between streets to the maximum number of streets transporting fluid among themselves. We describe a scaling law relating the number of streets that enter into partnership as a function of the three main parameters associated with the system, two associated with each individual street (determining the aspect ratio of the street), and a third associated with the distance between neighboring streets. In the final section we speculate on the timescale associated with the lifetime of the coherence of this mid-wake scaling regime.     

Effect of Al<Subscript>2</Subscript>O<Subscript>3</Subscript> phases on the enhancement of thermal conductivity and viscosity of nanofluids in engine oil

Thermal conductivity of α-Al₂O₃ was measured using hot wire method. α-Al₂O₃ (20 nm in size) was synthesized by microwave method for which, the results were compared with commercially available γ-Al₂O₃. Thermal conductivity of nanofluids was investigated considering, it is dependency on Al₂O₃ phase. It was observed that by adding 3 wt% of nano γ-Al₂O₃ and α-Al₂O₃ to the engine oil, thermal conductivity increases by 37 and 31%, respectively. The corresponding viscosity increase for the same amount of nano γ-Al₂O₃ and α-Al₂O₃ were 36 and 38%, respectively. It was concluded that the differences in thermal conductivity originate from higher specific surface area of γ-Al₂O₃ compared to the α-Al₂O₃ which is the result of porosity difference, obtained during the synthesis process.     

Rheology of pulp suspensions using ultrasonic Doppler velocimetry

Conventional rheometry coupled with local velocity measurements (ultrasonic Doppler velocimetry) are used to study the flow behaviour of various commercial pulp fibre suspensions at fibre mass concentrations ranging from 1 to 5 wt.%. Experimental data obtained using a stress-controlled rheometer by implementing a vane in large cup geometry exhibits apparent yield stress values which are lower than those predicted before mainly due to existence of apparent slip. Pulp suspensions exhibit shear-thinning behaviour up to a high shear rate value after which Newtonian behaviour prevails. Local velocity measurements prove the existence of significant wall slippage at the vane surface. The velocimetry technique is also used to study the influence of pH and lignin content on the flow behaviour of pulp suspensions. The Herschel–Bulkley constitutive equation is used to fit the local steady-state velocity profiles and to predict the steady-state flow curves obtained by conventional rheometry. Consistency between the various sets of data is found for all suspensions studied, including apparent yield stress, apparent wall slip and complete flow curves.     

Implementing and using high-order finite element methods

We present theoretical analyses of and detailed timings for two programs which use high-order finite element methods to solve the Navier- Strokes equations in two and three dimensions. The analyses show that algorithms popular in low-order finite element implementations are not always appropriate for high-order methods. The timings show that with the proper algorithms high-order finite element methods are viable for solving the Navier-Stokes equations. We show that it is more efficient, both in time and storage, not to precompute element matrices as the degree of approximating functions increases. We also study the cost of assembling the stiffness matrix versus directly evaluating bilinear forms in two and three dimensions. We show that it is more efficient not to assemble the full stiffness matrix for high-order methods in some cases. We consider the computational issues with regard to both Euclidean and isoparametric elements. We show that isoparametric elements may be used with higher-order elements without increasing the order of computational complexity.     

Cyclopropanation and epoxidation of 2-ylidene derivatives of lupane series

Russian Journal of Organic Chemistry - Crotone condensation of allobetulone with fluorine-containing benzaldehydes afforded new α,β-unsaturated ketones of lupane series. Their...