抛物面式太阳能聚能系统聚光特性模拟

结合集热器的光学特性,本文应用蒙特卡罗法对理想的槽型和碟型两种抛物面集热器在不同焦距、不同边缘角时焦面上的热流密度进行了计算,获得了焦距、边缘角和聚光比之间的关系。在考虑太阳不平行度、跟踪指向误差、镜面的反射误差条件下,对碟型抛物面太阳能聚能系统的辐射特性进行了数值模拟分析,获得了吸收器壁面热流分布以及边缘角对焦面热流分布的影响,为太阳能聚能系统的设计和安装提供参考依据。     

Self-assembled networks of conducting polyaniline in bulk polymers: A new class of conducting polymer blends

This review of the current status of conducting polymers will focus on recent progress which demonstrates that the initial promise of the late 1970's has become reality. Conducting polymers are now available as materials with truly unique properties: They combine the important electronic and optical properties of semiconductors and metals with the attractive mechanical properties and processing advantages of polymers. Conducting polymer blends based upon polyaniline (PANI) are a new class of materials in which the threshold for the onset of electrical conductivity (σ) can be reduced to volume fractions below 1%, well below that required for classical percolation (16% by volume for globular conducting objects dispersed in an insulating matrix in three dimensions). The origin of this remarkably low threshold for the onset of electrical conductivity is the self-assembled network morphology of the PANI polyblends which forms during the course of liquid-liquid separation. Since the average density of the conducting network near threshold is small, the conductivity increases smoothly and continuously over many orders of magnitude as the concentration of conducting polymer increases above threshold. The low percolation threshold and the continuous increase of σ(f) above threshold are particularly important; as a result of this combination, conducting polyblends can be reproducibly fabricated with controlled levels of electrical conductivity while retaining the desired mechanical properties of the matrix polymer.^1-3)     

Wavelet method for processing white light interferogram from optical fiber interferometer

The precise determination of the ZOPDfor the whitelight interferometryis essential toits applicationsinthefield of measurements of surface profile,height ,anddepth,and quality control[1-5].The ZOPDis a positionininterferogram with the highest envelope pea…     

高效腔内色散调Q Nd:YAG紫外激光器

采用避免激光器不稳定的色散调Q YAG激光谐振腔设计,用Ⅰ类非临界相位匹配LBO晶体,在腔内产生二次谐波,产生的532nm与腔内1064nm在腔内经过Ⅱ类临界相位匹配LBO晶体产生355nm的紫外激光。为了提高谐波转化效率,分别在腔内插入了λ／4波片、偏振片,得到在泵浦捕运光功率约为120W时输出2．5W的355nm紫外激光,功率稳定性RMS在3h内小于0．8％。     

火焰原子吸收光谱法测定中草药丹参不同部位金属元素的含量

采用HNO₃-HClO₄(4∶1)混酸消化丹参的根、茎和叶,利用火焰原子吸收光谱法对消化液中的五种人体必需的金属元素K,Cu,Zn,Fe,Mg进行了测定。该方法的标准曲线的相关系数为0.998 7～0.999 7,加标回收率为99.7％～104.4％,相对标准偏差(RSD)小于2％。结果显示：K,Cu,Zn,Fe,Mg在丹参根、茎和叶的含量均有以下次序：K＞Mg＞Fe＞Zn＞Cu。丹参叶的K,Cu,Fe,Mg的含量大于根和茎。根、茎、叶中的锌铜比值均较小。该测定结果为研究金属元素K,Cu,Zn,Fe,Mg在丹参中的分布以及金属元素的含量与丹参药效之间的关系提供了有用的数据。     

天然气管道泄漏可调谐二极管激光遥感探测的研究

天然气管道泄漏不仅造成经济损失而且是危险之源。传统的天然气管道泄漏检测技术效率低、速度慢,难以满足实际应用的需要。近年来以近红外二极管激光吸收光谱为基础的光学传感器由于具有灵敏度高、体积小、重量轻和无需维护等优点而得到了广泛的应用。文章以可调谐二极管激光吸收光谱和谐波探测技术为基础进行天然气管道泄漏遥感探测技术的研究,采用二次谐波与一次谐波信号的比值作为系统浓度标定,结果显示浓度与比值之间具有较好的一致性。文章还就不同地形散射体对探测结果的影响进行了测量和分析,实验结果表明二次谐波与一次谐波信号比值标定技术对便携式二极管激光光学测量能够很好的满足实际应用的需要。     

壳聚糖混合膜酶降解的FTIR分析

生物可降解性是壳聚糖的重要性质之一,但利用傅里叶变换红外光谱(FTIR)研究降解过程中壳聚糖的变化则较少。文章制备了由高脱乙酰度壳聚糖(HDC)和中脱乙酰度壳聚糖(MDC)组成的混合膜。运用FTIR分析了壳聚糖混合膜组分变化对其红外谱图和脱乙酰度(DD)的影响,并研究了该混合膜在溶菌酶的降解作用下红外谱图和脱乙酰度的变化。发现壳聚糖混合膜材料的脱乙酰度与膜中MDC组分的比例呈线性关系;随降解的进行,混合膜的脱乙酰度增加。结果证实了溶菌酶对较低脱乙酰度壳聚糖的选择性降解作用,而且表明FTIR可用于分析壳聚糖混合膜降解过程中的化学变化。     

Central limit theorem for linear processes generated by IID random variables under the sub-linear expectation

In this paper, we investigate the central limit theorem and the invariance principle for linear processes generated by a new notion of independently and identically distributed(IID) random variables for sub-linear expectations initiated by Peng [19]. It turns out that these theorems are natural and fairly neat extensions of the classical Kolmogorov's central limit theorem and invariance principle to the case where probability measures are no longer additive.     

光虚拟专用网建模和标准扩展研究

在自动发现机制为基础的OVPN上,首次提出了一种基于集中方式的光虚拟专用网建立模型,并进而演化出了OVPN的应用方案,针对OIF组织UNI1.0标准进行了一定的扩展,实现了光虚拟专用网的创建、注册、业务建立和删除、注销和对象定义等.     

Giant Asymmetric Transmission and Circular Dichroism with Angular Tunability in Chiral Terahertz Metamaterials

Inspired by the chiral structure from mode interaction, a chiral terahertz metamaterial and its complementary structure with the coexistence of asymmetric transmission and circular dichroism response are designed. The asymmetric transmission happens in the presence of electric and magnetic modes perpendicular to each other, resulting from intrinsic chirality under normal incidence. Circular dichroism exists in the presence of electric and magnetic modes parallel to each other under oblique incidence because of extrinsic chirality. Both asymmetric transmission and circular dichroism are enhanced by complementary structures, benefitting from the coupling between adjacent units. The maximum of chiral parameter κ can achieve 450, which is one hundred times higher than previously reported. The chiral response can be tuned by the incident angle and is sensitive to the environmental refractive index. The results highlight the potential applications of these metamaterials in chiral sensing and polarization transformation devices.