太赫兹真空电子器件用场发射阴极技术分析

本文阐述了太赫兹真空电子器件对阴极电子源的需求条件,分析了在该器件中应用场发射阴极的可能性。介绍了当前两种主要场发射阴极,即金属薄膜场发射阴极和碳纳米管场发射阴极的国内外发展情况,指出了它们各自的优势以及实际应用中存在的障碍,并提出了相应的解决途径。试验和分析结果表明,场发射阴极具有很好的太赫兹真空电子器件应用前景。     

三维树枝状C/PbWO4催化剂的制备及其对不同染料的光催化降解性能

采用水热法合成了一种高结晶度的3D树枝状C/PbWO₄复合光催化剂（其中碳的质量分数分别为0.13%、0.26%、0.52%、0.78%）。应用X射线衍射、N₂物理吸附、扫描电子显微镜、透射电子显微镜、能量色散X射线光谱、紫外可见漫反射光谱、光致发光光谱和光电流响应等手段对合成样品进行了表征。研究结果表明,当C的复合量为0.52%时,催化剂在降解偶氮染料酸性橙Ⅱ、甲基橙和罗丹明B呈现出最高的光催化活性,在光照100 min内对20 mg·L^-1酸性橙Ⅱ的降解率达到97%,为纯PbWO₄的2.48倍。C/PbWO₄复合光催化剂活性提高的主要原因是掺杂在催化剂表面的C成为了电子俘获中心,有效俘获光生电子,促进光生电子和空穴分离的显著效果,从而产生更多活性物种（·OH、h⁺）参与染料分子的降解,提升光催化活性。     

长链超支化聚合物的合成研究进展

长链超支化聚合物(HyperMacs)凭借其含有大量的功能端基和可调控的链结构等优点已经引起国内外科研人员越来越广泛的关注。HyperMcs除了拥有超支化聚合物固有的低粘度、溶解性好、含有大量的功能性端基的特点外,同时拥有高剪切敏感性、熔体弹性、冲击强度和零剪切粘度,因而在药物载体、能量存储及传递和纳米催化剂等方面可能拥有更为广泛的应用。本文根据HyperMacs合成方法的不同,分别从迭代法和ABx线型大分子单体法两个主要方面对其研究进展进行了总结和评述,并在此基础上展望了该类聚合物的研究方向和发展趋势。     

层状多硫代锑(Ⅲ)酸镉(Ⅱ)化合物(1,4-DABH2)Cd2Sb2S6的溶剂热合成与表征

利用溶剂热方法合成了层状多硫代锑髥酸镉髤化合物(1,4-DABH2)Cd2Sb2S6(1)(1,4-DAB=1,4-丁二胺),并通过红外光谱、热重分析对其进行了表征,用X-射线衍射测定了化合物的单晶结构。单晶解析表明,化合物属正交晶系,Cmca空间群,Mr=750.77,a=0.860 3(5)nm,b=0.898 7(6)nm,c=2.273(2)nm,V=1.758(2)nm3,Z=4,λ=0.071 073 nm,R=0.032,wR=0.106 7。晶体结构中含有六元环的Cd2SbS3和八元环的Cd2Sb2S4的阴离子网络层状[CdSbS3]nn-,双质子化的有机阳离子在阴离子层之间以氢键N-H…S形式连接。另外紫外-可见漫反射光谱研究表明,化合物为半导体。     

钛表面生物活性榍石/氧化钛复合涂层的结构和磷灰石形成机理

采用微弧氧化和热处理复合技术,在钛表面制备了具有双层结构的榍石/氧化钛复合涂层。榍石/氧化钛复合涂层的外层是由微弧氧化涂层经热处理后晶化生成;而内层是由钛基底的氧化生成,并且氧化钛表现出不同的Ti,O原子比。由于钛基底的氧化,孔径在50~500nm的微孔呈层状结构分布在涂层内层。与微弧氧化涂层相比,该复合涂层具有很好的磷灰石诱导能力,这是由于榍石沿着特定晶面和晶向与羟基磷灰石表现出良好的晶体学匹配关系,从而为磷灰石的成核和取向沉积过程提供良好的位点。     

近红外光谱法用于纯化过程中鞣花酸含量的监控

采用近红外光谱技术结合遗传算法优化的小波神经网络,对大孔树脂纯化过程中橄榄果中的鞣花酸含量进行监控。通过小波变换对光谱进行去噪、压缩,作为人工神经网络的输入,同时以遗传算法优化神经网络的权值与阈值,并与常用的偏最小二乘(PLS)线性模型的建模效果进行比较。实验结果表明,两者都能够较准确的预测鞣花酸的含量,相对而言,人工神经网络(ANN)效果较好。     

Development of hyperbranched polymers with non-covalent interactions for extraction and determination of aflatoxins in cereal samples

A novel approach for assembling homogeneous hyperbranched polymers based on non-covalent interactions with aflatoxins was developed; the polymers were used to evaluate the extraction of aflatoxins B1, B2, G1 and G2 (AFB1, AFB2, AFG1 and AFG2) in simulant solutions. The results showed that the extraction efficiencies of three kinds of synthesized polymers for the investigated analytes were not statistically different; as a consequence, one of the representative polymers (polymer I) was used as the solid-phase extraction (SPE) sorbent to evaluate the influences of various parameters, such as desorption conditions, pH, ionic strength, concentration of methanol in sample solutions, and the mass of the sorbent on the extraction efficiency. In addition, the extraction efficiencies for these aflatoxins were compared between the investigated polymer and the traditional sorbent C18. The results showed that the investigated polymer had superior extraction efficiencies. Subsequently, the proposed polymer for the SPE packing material was employed to enrich and analyze four aflatoxins in the cereal powder samples. The limits of detection (LODs) at a signal-to-noise (S/N) ratio of 3 were in the range of 0.012–0.120 ng g⁻¹ for four aflatoxins, and the limits of quantification (LOQs) calculated at S/N = 10 were from 0.04 to 0.40 ng g⁻¹ for four aflatoxins. The recoveries of four aflatoxins from cereal powder samples were in the range of 82.7–103% with relative standard deviations (RSDs) lower than 10%. The results demonstrate the suitability of the SPE approach for the analysis of trace aflatoxins in cereal powder samples.     

Preparation of biodegradable and thermoresponsive enzyme–polymer conjugates with controllable bioactivity via RAFT polymerization

The preparation of biodegradable and thermoresponsive enzyme–polymer bioconjugates with controllable enzymatic activity via reversible addition−fragmentation chain transfer (RAFT) polymerization and amidation conjugation reaction is presented. A new 2-mercaptothiazoline ester functionalized RAFT agent with intra-disulfide linkage was synthesized and used as chain transfer agent (CTA) to generate a biocompatible homopolymer, poly(ethyleneglycol) acrylate (polyPEG-A) and a thermoresponsive copolymer of poly(ethyleneglycol) acrylate with di(ethyleneglycol)ethyl ether acrylate [poly(PEG-A-co-DEG-A)]. These biodegradable and thermoresponsive polymers were then conjugated to the surface of glucose oxidase (GOx) under mild condition to afford the biodegradable and thermoresponsive enzyme–polymer conjugates. Cleavage of the polymer chains from the GOx surface obviously recovered the enzymatic activity. The thermoresponsive test of GOx-poly(PEG-A-co-DEG-A) revealed that the bioconjugate exhibited regular enzymatic activity fluctuation upon the temperature change below or above the lower critical solution temperature (LCST). The as-prepared enzyme–polymer conjugates were also characterized using ¹H NMR, UV–vis spectroscopy, polyacrylamide gel electrophoresis (PAGE) and biocatalytic activity tests. These smart enzyme–polymer conjugates would envision promising applications in biotechnology and biomedicine.     

基于滤纸微孔板的酶联免疫吸附测定方法研究

用光刻法在普通定量滤纸上制作出了疏水图案,得到了滤纸微孔板。将表面修饰后的SiO2微球负载在滤纸表面,以提高滤纸纤维吸附蛋白质的能力,基于此建立了以间接酶联免疫吸附法测定羊抗兔免疫球蛋白的方法。以酶标兔抗羊IgG为例,负载SiO2微球后,滤纸微孔板吸附该蛋白质的量提高了20%～700%;将SiO2负载法应用于羊抗兔IgG的检测时,可使信号增强20%～150%。在本实验条件下,测定羊抗兔IgG的线性范围为3×10-12～3×10-8mmol/孔。本方法使生物免疫试剂消耗量减少至3～5μL/孔、检测时间降至20 min/板、滤纸微孔板制作成本可低至约每板1.1美元,为研制准确、快速和低成本的疾病检测设备提供了新的思路和可能性。     

UPLC-MS/MS和主成分分析法判别海洛因原产地

建立了超高效液相色谱-串联四极杆质谱仪(UPLC-MS-MS)在电喷雾离子源正离子(ESI+)和多反应监测(MRM)模式下定量测定海洛因中9种生物碱的方法,并采用主成分分析法建立数学模型,实现了快速区分"东南亚"和"西南亚"地区海洛因样品的目的。样品使用甲醇超声提取,ACQUITY UPLC BEH C18(100 mm×2.1 mm i.d.,1.7μm)色谱柱,流动相为pH 9.66的10 mmol/L的碳酸氢铵和乙腈,在梯度条件下分析。结果表明,在5～500μg/kg添加水平下回收率范围为88%～118%,相对标准偏差为1.7%～10%。9种生物碱的检出限(LOD,以信噪比(S/N)>3计)和定量限(LOQ,以S/N>10计)分别为0.03～1.67 mg/kg和0.10～5.51 mg/kg。本方法在11 min内即可对缴获海洛因样品中的9种生物碱进行定量分析,可用于海洛因原产地的快速判别。