Pyrolysis of tertiarybutylphosphine at low pressure

The pyrolysis of tertiarybutylphosphine (TBP) has been studied in the low pressure conditions used for chemical beam epitaxy (CBE). The pyrolysis studies were carried out in low pressure reactors of two different configurations, one of which is a cracker cell designed for use in a CBE system. The reaction products were studied using a quadrupole mass spectrometer. The products observed are accounted for by a reaction mechanism involving homolysis of the parent TBP molecule to produce PH₂ and C₄H₉ radicals. These undergo subsequent reactions to form the stable products C₄H₈, PH₃ and H₂, with smaller amounts of P and P₂ being produced. The production of the sub-hydride PH₂ using this cracker cell design indicates that the use of partially cracked TBP may be a promising technique for reducing the amount of carbon incorporated into the growing epitaxial layer.     

Structure of thin block copolymer films studied by X-ray reflectivity

Summary X-ray reflectivity may be used to determine the internal structure of thin polymer films. An electron density difference of 10% for polystyrene and polyisoprene is sufficient to distinguish between a random distribution of lamellae, complete orientation parallel to the substrate surface and a surface induced formation of lamellae. The disappearance of the lamellar Bragg-peaks, with heating of the film, shows the transition into the disordered state.     

On exact order estimates of N-widths of classes of functions analytic in a simply connected domain

In the spaces E _q(Ω), 1 < q < ∞, introduced by Smirnov, we obtain exact order estimates of projective and spectral n-widths of the classes W ^r E _p(Ω) and W ^r E _p(Ω)Ф in the case where p and q are not equal. We also indicate extremal subspaces and operators for the approximative values under consideration.     

Early detection and trellis splicing: reduced-complexity iterativedecoding

The bit-error rate (BER) performance of new iterative decoding algorithms (e,g,, turbodecoding) is achieved at the expense of a computationally burdensome decoding procedure. We present a method called early detection that can be used to reduce the computational complexity of a variety of iterative decoders. Using a confidence criterion, some information symbols, state variables, and codeword symbols are detected early on during decoding. In this way, the computational complexity of further processing is reduced with a controllable increase in the BER. We present an easily implemented instance of this algorithm, called trellis splicing, that can be used with turbodecoding. For a simulated system of this type, we obtain a reduction in the computational complexity of up to a factor of four, relative to a turbodecoder that obtains the same increase in the BER by performing fewer iterations     

Effective index drift from molecular hydrogen diffusion inhydrogen-loaded optical fibres and its effect on Bragg gratingfabrication

When hydrogen loading is used to enhance the photosensitivity of silica-based optical waveguides and fibres, the presence of molecular hydrogen dissolved in the glass matrix changes the effective index of propagation of guided optical modes by as much as 0.05%. Real-time monitoring of the reflectivity spectrum of Bragg gratings written in such conditions shows that the centre wavelength follows the changes in hydrogen concentration due to diffusion and reaction with glass defects     

All-optical wavelength conversion by semiconductor opticalamplifiers

Following a brief introduction to the applications for wavelength conversion and the different available conversion techniques, the paper gives an in depth analysis of cross gain and cross phase wavelength conversion in semiconductor optical amplifiers. The influence of saturation filtering on the bandwidth of the converters is explained and conditions for conversion at 20 Gb/s or more are identified. The cross gain modulation scheme shows extinction ratio degradation for conversion to longer wavelengths. This can be overcome using cross phase modulation in semiconductor optical amplifiers that are integrated into interferometric structures. The first results for monolithic integrated interferometric wavelength converters are reviewed, and the quality of the converted signals is demonstrated by transmission of 10 Gb/s converted signals over 60 km of nondispersion shifted single mode fiber     

Si/SiGe epitaxial-base transistors. I. Materials, physics, andcircuits

A detailed review of SiGe epitaxial base technology is presented, which chronicles the progression of research from materials deposition through device and integration demonstrations, culminating in the first SiGe integrated circuit application. In part I of this paper, the requirements and processes for high-quality SiGe film preparation are discussed, with emphasis on fundamental principles. A detailed overview of SiGe HBT device design and implications for circuit applications is then presented     

Mine operating accurate stability control with optical fibersensing and Bragg grating technology: the European BRITE/EURAM STABILOSproject

Recent developments of stability control in mines, essentially based on Ge-doped fiber Bragg gratings (FBG) are reported including results about the different aspects of the system: accurate characterizations of FBG, sensor network topology and multiplexing method, user interface design and sensor packaging     

Transient simulation of heterojunction photodiodes-part II:analysis of resonant cavity enhanced photodetectors

The high-speed response properties of resonant cavity enhanced (RCE) photodetectors have been investigated. The limitations on the high-speed performance of photodiodes and the advantages of RCE-detection are discussed. Transient response of heterojunction photodiodes under pulsed optical illumination has been simulated using the method described in Part I. Results on conventional AlGaAs/GaAs and RCE GaAs/InGaAs heterojunction p-i-n photodiodes are presented. For small area detectors, almost 50% bandwidth improvement along with a two-fold increase in efficiency is predicted for RCE devices over optimized conventional photodiodes. A nearly three-fold enhancement in the bandwidth-efficiency product was shown