A cobalt(II)-selective PVC membrane based on a Schiff base complex of N,N′-bis(salicylidene)-3,4-diaminotoluene

A new PVC membrane electrode for Co²⁺ based on N,N′-bis(salicylidene)-3,4-diaminotoluene, an excellent neutral carrier, has been fabricated using sodium tetraphenylborate (NaTPB) as an anionic excluder and dioctylphthalte (DOP) as a solvent mediator. The electrode exhibits a linear potential response in the concentration range of 7.9 × 10⁻⁸ to 1.0 × 10⁻¹ M with a slope of 30 ± 0.2 mV per decade. The detection limit of the proposed sensor is 5.0 × 10⁻⁸ M and it can be used over a period of 5 months. The proposed sensor revealed good selectivity over a wide variety of other cations including alkali, alkaline earth, heavy and transition metals and could be used in the pH range of 2.0-9.0. This electrode was successfully applied for the determination of Co²⁺in real samples and as an indicator electrode in potentiometric titration of cobalt ions.     

Synthesis, characterisation and evaluation of polydithiocarbamate resin supported on macroreticular styrene-divinylbenzene copolymer for the removal of trace and heavy metal ions

A new chelating resin was synthesised by the modification of styrene-divinylbenzene (2%) copolymer and incorporation of dithiocarbamate groups. The polydithiocarbamate resin was characterised by elemental analysis, thermal studies and IR studies. The analytical characteristics of the sorbent were established and optimum sorption conditions for Cu, Ni, Pb, Fe, As and Mn determined. The total sorption capacity of the resin was 37 mg g⁻¹ for Ni(II), 35 mg g⁻¹ for Cu(II), 29 mg g⁻¹ for Fe(III) and 23 mg g⁻¹ for Pb(II). The optimum pH for the removal of metal ions was 3-5 for Ni(II), 5 for Cu(II), 4 for Fe(III) and 4-5 for Pb(II). High sorption capacity was observed when compared with other conventional chelating polymers. The sorption kinetics was fairly rapid, as apparent from the loading half time t_1/2 values, indicating a better accessibility of the chelating sites.     

Electrocatalytic treatment of waste: studies on discoloration of an industrial azo dye effluent

A textile dye effluent containing chiefly reactive azo dyes has been treated electrochemically for discoloration and COD (chemical oxygen demand) reduction at different current densities, flow rates and dilution. Experiments have been carried out in a thin electrochemical reactor under single pass conditions using a dimensionally stable catalytic anode (DSA) and a stainless steel cathode.     

Volumetric studies in oxidation-reduction reactions: Oxidation with chloramine-t. iodine monochloride method

Chloramine-T has been used as an oxidizing agent in hydrochloric acid medium' for the volumetric estimations of potassium iodide, hydrazine sulphate, arscnious oxide, stannous chloride, mercurous chloride, tartar-emetic, potassium thiocyanate and ferrous ammonium sulphate, using iodine monochloride as a catalyst and pre-oxidizer. Chloroform is used as an indicator. It is coloured pink owing to the liberation of iodine during the titration and becomes very pale yellow at the end-point because of the formation of iodine monochloride.     

Synthesis of natural triisopentenylated flavanone, euchrenone a2

Euchrenone a₂ (7) isolated from the roots ofEuchresta japonica has been synthesised from 3-prenylphloroacetophenone (1) by other workers. We carried out its cyclodehydrogenation with dichloro dicyano quinone (DDQ) to obtain 6-acetyl-5,7-dihydroxy-2,2-dimethylchromene (2) which was ethoxymethylated in the 7-position to give 6-acetyl-7-ethoxymethoxy-5-hydroxychromene (3). Chalcone condensation of3 and 4-ethoxymethoxy-3-C-prenylbenzaldehyde (4) gave 4,6′-bisethoxymethoxy-2′-hydroxy-6″, 6″-dimethyl-3-C-prenylpyrano (2″, 3″–4,3) chalcone (5) which cyclised with methanolic sodium acetate to give protected 5,4′-bisethoxymethoxy-6″, 6″-dimethyl-3′-C-prenylpyrano (2″, 3″–7,8) flavanone (6). Deprotection of6 with 4% methanolic HCl yielded (7) with melting point and spectral data identical to that of the natural compound.     

Comparative Studies of Tridentate Sulfur and Nitrogen‐Containing Ligands as Ionophores for Construction of Cadmium Ion‐Selective Membrane Sensors

New polymeric membrane cadmium‐ion selective sensors have been prepared by incorporating nitrogen and sulfur containing tridentate ligands as the ionophores into the plasticized PVC membranes. Poly(vinyl chloride) (PVC) based membranes of potassium hydrotris[N‐(2,6‐xylyl)thioimdazolyl) borate] (KTt^2,6‐xylyl) and potassium hydrotris(3‐phenyl‐5‐methylpyrazolyl) borate (KTp^Ph,Me) with sodium tetraphenyl borate (NaTPB) as an anionic excluder and dibutylphthalate (DBP), tributylphthalate (TBP), dioctylsebacate (DOS), and o‐nitrophenyloctyl ether (o‐NPOE) as plasticizing solvent mediators were investigated in different compositions. KTt^2,6‐xylyl was found to be a selective and sensitive ion carrier for Cd(II) membrane sensor. A membrane composed of KTt^2,6‐xylyl:NaTPB:PVC:DBP with the % mole ratio 2.3 : 1.1 : 34.8 : 61.8 (w/w) works well over a very wide concentration range (7.8×10^?8–1.0×10^?2 M) with a Nernstian slope of 29.4±0.2 mV/decades of activity between pH values of 3.5 to 9.0 with a detection limit of 4.37×10^?8 M. The sensor displays very good discrimination toward Cd(II) ions with regard to most common cations. The proposed sensor shows a short response time for whole concentration range (ca. 8 s). The effects of the cationic (tetrabutylammonium chloride, TBC), anionic (sodium dodecyl sulfate, SDS) and nonionic (Triton X‐100) surfactants were investigated on the potentiometric properties of proposed cadmium‐selective sensor. The proposed sensor based on KTt^2,6‐xylyl ionophore has also been used for the direct determination of cadmium ions in different water samples and human urine samples.     

Phosphorus-based p-tert-butylcalix[5]arene ligands

New calix[5]arene trivalent phosphorus derivatives have been synthesized which should be excellent ligands with which to study and control the interaction of a ligand atom with a metal. The larger cavity of the calix[5]arene (compared to calix[4]arene) provides a good balance between constraint and flexibility. Treatment of p-tert-butylcalix[5]arene with 2 equiv of either tris(dimethylamino)phosphine or dichlorophenylphosphine inserts two RP moieties into the calix[5]arene framework to give calix[5](PR)2(OH) (1, R = Me2N; 2, R = Ph). Further treatment of 1 with 4 equiv of HCl gives calix[5](PCl)2(OH) (3). Heating a solution of the monophosphorus compound calix[5](PNMe2)(OH)3 (4) releases dimethylamine to yield both monomeric calix[5](P)(OH)2 (6) and dimeric [calix[5](P)(OH)2](2) (7), the latter having a tubelike geometry. X-ray crystallographic studies confirm the structures and show that 1 and 2 have approximate cone conformations while 3 has an approximate 1,2-alternate conformation. The orientations of the phosphorus lone pairs and oxygen atoms in all derivatives provide a framework for both soft and hard ligand interactions within the calix[5]arene.     

Favorable interactions of amine- and ester-terminated PAMAM with cationic surfactants: photophysical and transport studies

Conductivity (kappa), turbidity (tau), and fluorescence (I1/I3) studies of hexadecyltrimethylammonium bromide (HTAB), hexadecylpyridinium bromide (HPyBr), and hexadecylpyridinium chloride (HPyCl) in aqueous poly(amido amine) (PAMAM) dendrimers of generations 0 to 2.5 G have been carried out. The complexation of surfactant monomers with the PAMAM surface groups is demonstrated by the critical aggregation concentration (cac), which is two to three orders of magnitude less than the micellization of cationic surfactants in aqueous PAMAM and denoted by critical micelle concentration (cmc*). In the presence of aqueous amine-terminated PAMAM, the cmc* value for each surfactant was much lower than the cmc in pure water, while they remain close to each other in the presence of aqueous ester-terminated PAMAM for each surfactant. The fluorescence studies demonstrated that both amine- and ester-terminated PAMAM interact with the cationic surfactants, though the mode of interaction varied due to the different nature of surface groups.     

Myoglobin/arylhydroxylamine film modified electrode: Direct electrochemistry and electrochemical catalysis

The adsorption processes and electrochemical behavior of 4-nitroaniline (4-NA) adsorbed onto glassy carbon electrodes (GCE) have been investigated in aqueous 0.1 M nitric acid (HNO₃) electrolyte solutions using cyclic voltammetry (CV). 4-NA adsorbs onto GCE surfaces, and upon potential cycling past −0.2 V, is transformed into the arylhydroxylamine (ArHA) derivative which exhibits a well-behaved pH dependent redox couple centered at 0.32 V at pH 1.5. It is noted as arylhydroxylamine modified glassy carbon electrodes (HAGCE). This modified electrode can be readily used as an immobilization matrix to entrap proteins and enzymes. In our studies, myoglobin (Mb) was used as a model protein for investigation. A pair of well-defined reversible redox peaks of Mb (Fe(III)-Fe(II)) was obtained at the Mb/arylhydroxylamine modified glassy carbon electrode (Mb/HAGC) by direct electron transfer between the protein and the GCE. The formal potential (E^0′), the apparent coverage (Γ^*) and the electron-transfer rate constant (k_s) were calculated as −0.317 V, 8.26 × 10⁻¹² mol/cm² and 51 ± 5 s⁻¹, respectively. Dramatically enhanced biocatalytic activity was exemplified at the Mb/HAGC electrode by the reduction of hydrogen peroxide (H₂O₂), trichloroacetic acid (TCA) and oxygen (O₂). The Mb/arylhydroxylamine film was also characterized by UV-visible spectroscopy (UV-vis), scanning electron microscope (SEM) indicating excellent stability and good biocompatibility of the protein in the arylhydroxylamine modified electrode. This new Mb/HAGC electrode exhibited rapid electrochemical response (2 s) for H₂O₂ and had good stability in physiological condition, showing the potential applicability of the films in the preparation of third generation biosensors or bioreactors based on direct electrochemistry of the proteins.