Template synthesis in the nickel(II)–thiocarbohydrazide–propanone triple system

The complexing process proceeding in the Ni^II–thiocarbohydrazide (H₂N–H–NC(=S)–NH–NH₂)–propanone triple system in EtOH solution and nickel(II)hexacyanoferrate(II) gelatin-immobilized matrix has been studied. It has been found that in the first case, template synthesis leading, as a minimum, to formation of three coordination compounds of Ni^II with (N,N,S,S)-donor tetradentate ligands having NiL¹, NiL² and NiL³compositions where L¹ is 4,6,6-trimethyl-2,3,7,8-tetraazanonen-3-di(thiohydrazide)-1,9, L² is 4,6,6,12-tetrametyl-1,9-dithio-2,3,7,8,10,11-hexaazatridekadien-3,11-hydrazide-1 and L³ is 2,8,10,10,16-pentamethyl-5,13-dithio-3,4,6,7,11,12,14,15-octaazaheptadekatrien-2,7,15 is observed, whereas in the gelatin-immobilized matrix, a complexing process in the system considered does not occur.     

Studies on ion association. Calorimetric study of the formation of monoazido complexes of Ni(II), Zn(II) and Cd(II)

From rehydration experiments the hydrates Ba(OH)₂ · 8 H₂O, Ba(OH)₂ · 3 H₂O β-Ba(OH)₂, · 1 H₂O, and γ-Ba(OH)₂ · 1 H₂O have been found in the system Ba(OH)₂-H₂O. Thermoanalytical measurements (DTA, TG, DTG, high temperature X-ray diffraction, high temperature Raman scattering) on these hydrates are reported. Thermal decomposition of Ba(OH)₂ · 8 H₂O and Ba(OH)₂ · 3 H₂O always results in the formation of β-Ba(OH)₂ · 1 H₂O, the stable form of the monohydrates at ambient temperature. Dehydration of β- and γ-Ba(OH)₂ · 1 H₂O, both of which form anhydrous β-Ba(OH)₂ as the first product of decomposition, starts at 105 and 115°C, respectively. Single crystals of Ba(OH)₂ · 3 H₂O and γ-Ba(OH)₂ · 1 H₂O were prepared from Ba(OH)₂ · 8 H₂O meltings and from ethanolic solutions of Ba(OH)₂ , respectively. The crystal data are: Ba(OH)₂ · 3 H₂O (orthorhombic, Pnma): a = 764.0(2), b = 1140,3(5), c = 596.5(1) pm, Z = 4; γ-Ba(OH)₂ · 1 H₂O (monoclinic, P2₁/m or P2₁): a = 704.9(2), b = 418.4(1), c = 633.3(1) pm, β = 111.45(2)°, Z = 2.     

The determination of molybdenum and tungsten in sea and surface water

A simple method for the determination of molybdenum and tungsten in sea and surface water is presented. Molybdenum and tungsten are concentrated on activated charcoal by adsorption as the ammonium pyrrolidine dithiocarbamate complex; the optimal pH for adsorption is 1.3. Mo and W are then determined by thermal neutron activation, forming ⁹⁹Mo (T_{$\text{1}\text{2}$} = 66.7 h) and ¹³⁷W (T_{$\text{1}\text{2}$} = 23.8 h), respectively. The ^99mTc daughter of ⁹⁹Mo is measured as soon as the equilibrium between ^99mTc(T_{$\text{1}\text{2}$}= 6 h) and ⁹⁹Mo is established. The detection limits are 0.05 μg Mo l^-1 and 0.05 μg W l^-1 (or 0.001 μg W l^-1 after a simple chemical separation).     

Direct electrochemistry and enzymatic activity of hemoglobin in positively charged colloid Au nanoparticles and hemoglobin layer-by-layer self-assembly films

Alternate adsorption of positively charged colloid-Au nanoparticles (nano-Au⊕) and negatively charged hemoglobin (Hb) on L-cysteine (L-cys) modified gold electrode resulted in the assembly of {Hb/nano-Au⊕}n layer-by-layer films/L-cys modified gold electrode. The nano-Au⊕ was characterized by transmission electron micrograph (TEM) and microelectrophoresis. The modified electrode interface morphology was characterized by electrochemical impedance spectroscopy (EIS), atomic force mi- croscopy (AFM), cyclic voltammograms (CV) and chronoamperometry. Direct electron transfer between hemoglobin and gold electrodes was studied, and the apparent Michaelis-Menten constant ( km app) of the modified electrode was evaluated to be 0.10 mmol·L?1. Moreover, the higher activity of proteins in the nano-Au⊕ films could be retained compared with the electropolymerization membrane, since the pro- teins in nano-Au⊕ films retained their near-native structure. Direct electron transfer between hemoglo- bin and electrode and electrochemically catalyzed reduction of hydrogen peroxide on a modified elec- trode was studied, and the linear range was from 2.1×10-8 to 1.2 ×10?3 mol·L-1 (r = 0.994) with a detection limit of 1.1×10-8 mol·L-1 H2O2.     

Inorganic oxide core, polymer shell nanocomposite as a high K gate dielectric for flexible electronics applications

Organic/inorganic core shell nanoparticles have been synthesized using high K TiO(2) as the core nanoparticle, and polystyrene as the shell. This material is easy to process and forms transparent continuous thin films, which exhibit a dielectric constant enhancement of over 3 times that of bulk polystyrene. This new dielectric material has been incorporated into capacitors and thin film transistors (TFTs). Mobilities approaching 0.2 cm(2)/V.s have been measured for pentacene TFTs incorporating the new TiO(2) polystyrene nanostructured gate dielectric, indicating good surface properties for pentacene film growth. This novel strategy for generating high K flexible gate dielectrics will be of value in improving organic and flexible electronic device performance.     

Studies on polymerization of vinyl acetate using ylide as an initiator and degradative transfer agent

Polymerization of vinyl acetate initiated by β-picolinium p-chlorophenacylide was carried out at 30, 35, and 40°C, using conventional dilatometric technique. The initiator and the monomer exponent values were 0.80 ± 0.15 and unity, respectively. The polymerization was inhibited in the presence of hydroquinone, but was favored by nonpolar solvent and polymerization temperature. The energy of activation was 90.3 KJ mol^?1. An average value of k/k_t for the present system was found to be 0.37 × 10^?2. The results are explained in terms of a radical mode of polymerization with degradative initiator transfer; the principal mode of termination, however, was bimolecular.     

Melt-polymerizable bisimido-bisphthalonitriles containing silicon,fluoro, and ether groups: Synthesis,characterization, and NMR study

Various melt-polymerizable bisimido-bisphthalonitrile polymer precursors were synthesized by the reaction of 4-aminophthalonitrile (4-APN) with bis(3,4-dicarboxyphenyl) dimethylsilane dianhydride (SIDA), 4,4′-hexafluoroisopropylidene diphthalic anhydride (6FDA), bis(3,4-dicarboxyphenyl)ether dianhydride (ODPA), and 3,3′, 4,4′-tetracarboxylichenzophen+ne dianhydride (BTDA) in an aprotic solvent. The synthesized monomers showed crystalline melting at 269 and 271°C. Elemental analysis, differential thermal analysis (DTA), infrared (IR), nuclear magnetic resonance (¹H-NMR) and mass spectral studies were carried out to characterize the synthesized monomers. Thermogravimetric analysis (TGA) of the synthesized monomers showed their thermal stability at 410–400°C. A detailed study and NMR investigation of the first step of condensation reaction was carried out and indicated the formation of a transient charge transfer complex. Thermal cyclization of the formed intermediate, however, gave the required monomers. A preliminary study demonstrated that melt-polymerization of the synthesized monomers gave thermallystable, tough polymers.     

The structure of malabricol

A single crystal X-ray analysis has confirmed the constitution and established the stereochemistry of the triterpene, malabaricol.     

A carbazole-based polymeric azodye

A new polymeric azodye has been synthesized from carbazole by diazotization of its derivative N-methylcarbazole-3,6-diamine and subsequent coupling reaction with 2,2-bis(4-hydroxyphenyl-3-sulfonate-Na)-propane prepared from bisphenol-A. Its physico-chemical, electrical, and thermal properties have been characterized; finally, its application to the preparation of colored semiconductive films from polyvinyl alcohol has been studied.     

Strategies for multi-site GLP studies

 A GLP study can be performed at more than one site. This is called a multi-site study. Although, the study is performed at different sites, it is still one study and must completely comply with the GLP principles. The fact that different activities are conducted at different sites implies that the planning, the organization and the communication are crucial for the success of the study. This means that all the staff involved should know their responsibilities and should have the knowledge and skills to realize all the phases of the study according to the GLP principles. To achieve a well managed multi-site study, several strategies for setting up such a study can be followed. This paper focuses on the responsibilities, communication, and collaboration of the personnel, which are involved in a multi-site study. Several case studies are highlighted, and we concluded that the basic communication triangle in a single-site GLP study between test facility management, study director, and the quality assurance unit should be extended to the communication among test facility and test site management, study director, principle investigator(s), and the quality assurance units at the test sites. Introduction Received: 14 August 2002 Accepted: 26 November 2002