Behavior of acetyl modified amino acids in reverse micelles: a non-invasive and physiochemical approach

The well-characterized, monodisperse nature of reverse micelles formed by sodium bis-(2-ethylhexyl)sulfosuccinate/water/isooctane and their usefulness in assimilating compounds of varied interests have been exploited to investigate the effect of acetyl modified amino acids (MAA) viz., N-acetyl-L-glycine (NAG), N-acetyl-L-aspartic acid (NAA) and N-acetyl-L-cysteine (NAC), on the water pool and physiochemical properties. Non-invasive techniques such as FTIR and UV-vis absorption spectroscopy have been employed to analyze the interactions of MAA with core water and the AOT headgroup. The micropolarities on both sides of AOT interface have further been investigated by UV-vis absorption probes, methyl orange (MO) and methylene blue (MB). The dynamics of water and temperature induced percolation process have also been studied. The MAA molecules have been found to assist the process with the increase in water content where as a contrary behavior has been observed with the increase in temperature. Conductivity results have been further rationalized in terms of scaling equations, which delineate the dynamic nature of the percolation process. The results have also been analyzed in the light of activation energy of the percolation process and thermodynamics of droplet clustering.     

Kinetics of the simultaneous oxidation of nickel(II) and sulfur(IV) by oxygen in alkaline medium in Ni(II)–sulfur(IV)–O2 system

In the Ni(II)–S(IV)–O₂ system in the region of pH > 8.4, both Ni(II) and S(IV) are simultaneously autoxidized, and when sulfur is consumed fully NiOOH precipitates. At pH > 8.4, ethanol has no effect on the rate, whereas ammonia strongly inhibits the reaction when pH > 7.0. The kinetics of the reaction, in both the presence and the absence of ethanol, is defined by the rate law where k is the rate constant, K_O is the equilibrium constant for the adsorption of O₂ on ? Ni(OH)₂ particle surface. In ammonia buffer, the factor F is defined by where K, K_OH, K₁, K₂, K₃, and K₄ are the stability constants of NiSO₃, NiOH⁺, Ni(NH₃)²⁺, Ni(NH₃), Ni(NH₃), and Ni(NH₃), respectively. In unbuffered medium, the factor F reduces to The values of k and K^sp were found to be (1.3 ± 0.08) × 10^?1 s^?1 and (4.2 ± 3.5) × 10^?16, respectively, at 30°C. A nonradical mechanism that assumes the adsorption of both SO₃^2? and O₂ on the ? Ni(OH)₂ particle surface has been proposed. At pH ≤ 8.2, Ni(II) displays no catalytic activity for sulfur(IV)‐autoxidation and it is also not oxidized to NiOOH. © 2010 Wiley Periodicals, Inc. Int J Chem Kinet 42: 464–478, 2010     

Formation of the imide [Ta(NMe2)3(μ-NSiMe3)]2 through an unprecedented α-SiMe3 abstraction by an amide ligand

Ta(NMe(2))(4)[N(SiMe(3))(2)] (1) undergoes the elimination of Me(3)Si-NMe(2) (2), converting the -N(SiMe(3))(2) ligand to the ═NSiMe(3) ligand, to give the imide "Ta(NMe(2))(3)(═NSiMe(3))" (3) observed as its dimer 4. CyN═C═NCy captures 3 to yield guanidinates Ta(NMe(2))(3-n)(═NSiMe(3))[CyNC(NMe(2))NCy](n) [n = 1 (5), 2 (6)]. The kinetic study of α-SiMe(3) abstraction in 1 gives ΔH(?) = 21.3(1.0) kcal/mol and ΔS(?) = -17(2) eu.     

C6-C8 bridged epothilones: consequences of installing a conformational lock at the edge of the macrocycle

A series of conformationally restrained epothilone analogues with a short bridge between the methyl groups at C6 and C8 was designed to mimic the binding pose assigned to our recently reported EpoA-microtubule binding model. A versatile synthetic route to these bridged epothilone analogues has been successfully devised and implemented. Biological evaluation of the compounds against A2780 human ovarian cancer and PC3 prostate cancer cell lines suggested that the introduction of a bridge between C6-C8 reduced potency by 25-1000 fold in comparison with natural epothilone D. Tubulin assembly measurements indicate these bridged epothilone analogues to be mildly active, but without significant microtubule stabilization capacity. Molecular mechanics and DFT energy evaluations suggest the mild activity of the bridged epo-analogues may be due to internal conformational strain.     

A dynamic open framework exhibiting guest- and/or temperature-induced bicycle-pedal motion in single-crystal to single-crystal transformation

A ligand bis(4-imidazol-1-yl-phenyl)diazene (azim) incorporating an azo moiety at the center and two imidazole groups at the terminals forms two coordination polymers {[Co(azim)(2)(DMF)(2)]·(ClO(4))(2)·2DMF}(n) (1) and {[Cd(azim)(2)(DMF)(2)]·(ClO(4))(2)·2DMF}(n) (2) (DMF = N,N'-dimethylformamide) at room temperature. Both 1 and 2 are isostructural with rhombic two-dimensional sheets stacking in ABAB... fashion resulting in large voids that contain DMF and ClO(4)ˉ as guests. In 1, the azo groups and phenyl rings are disordered over two positions and as in usual cases, the pedal motion cannot be discerned. Upon heating, 1 turns amorphous. In the case of 2, however, heat treatment does not lead to loss of crystallinity. Thus, when a crystal of 2 (mother crystal) is heated slowly, it causes substantial movement or escape of both metal-bound and lattice DMF besides movement of ClO(4)ˉ anions to give daughter crystals 2a, 2b, and 2c without losing crystallinity (single-crystal to single-crystal (SC-SC) transformation). Most interestingly, the X-ray structures of 2 and its daughter products reveal stepwise reversible bicycle-pedal or crankshaft motion of the azo group. When a crystal of 2c is kept in DMF for 10 h, crystal 2' is formed whose structure is similar to that of 2 with slight changes in the bond distances and angles. Also, crystals of 2 are converted to 3 and 4 upon being kept in acetone or DEF (DEF = N,N'-diethylformamide), respectively, for 10 h at ambient temperature in SC-SC transformation. In 3, each lattice DMF molecule is replaced by an acetone molecule, leaving the two coordinated DMF molecules intact. However, in 4, all lattice and coordinated DMF molecules are replaced by equal number of DEF molecules. Both in 3 and 4, the azo moieties show bicycle-pedal motion. Thus, bicycle-pedal motion that normally cannot be observed is shown here to be triggered by heat as well as guest molecules in SC-SC fashion.     

Ultraviolet-C light for treatment of Candida albicans burn infection in mice

Burn patients are at high risk of invasive fungal infections, which are a leading cause of morbidity, mortality, and related expense exacerbated by the emergence of drug resistant fungal strains. In this study, we investigated the use of UVC light (254 nm) for the treatment of yeast Candida albicans infection in mouse third degree burns. In vitro studies demonstrated that UVC could selectively kill the pathogenic C. albicans compared with a normal mouse keratinocyte cell line in a light exposure dependent manner. A mouse model of chronic C. albicans infection in non-lethal third degree burns was developed. The C. albicans strain was stably transformed with a version of the Gaussia princeps luciferase gene that allowed real-time bioluminescence imaging of the progression of C. albicans infection. UVC treatment with a single exposure carried out on day 0 (30 min postinfection) gave an average 2.16-log(10)-unit (99.2%) loss of fungal luminescence when 2.92 J cm(-2) UVC had been delivered, while UVC 24 h postinfection gave 1.94-log(10)-unit (95.8%) reduction of fungal luminescence after 6.48 J cm(-2). Statistical analysis demonstrated that UVC treatment carried out on both day 0 and day 1 significantly reduced the fungal bioburden of infected burns. UVC was found to be superior to a topical antifungal drug, nystatin cream. UVC was tested on normal mouse skin and no gross damage was observed 24 h after 6.48 J cm(-2). DNA lesions (cyclobutane pyrimidine dimers) were observed by immunofluorescence in normal mouse skin immediately after a 6.48 J cm(-2) UVC exposure, but the lesions were extensively repaired at 24 h after UVC exposure.     

A simple CdS nanoparticles cascading approach for boosting N3 dye/ZnO nanoplates DSSCs overall performance

Enhanced photosensitization in presence of CdS nanoparticles is achieved in electrochemically deposited ZnO nanoplates and N3 loaded dye-sensitized solar cells. Chemically embedded CdS nanoparticles act as a sandwiching layer between ZnO nanoplates and dye molecules by overcoming current limiting serious Zn²⁺/dye insulating complex formation and CdS photo-corrosion issues. The X-ray diffraction and the scanning electron microscopy confirm the ZnO with vertically aligned nanoplates, perpendicular to the substrate surface. Amorphous CdS is monitored using electron dispersive X-ray analysis. The low and high resolution transmission electron microscope images confirm the presence of CdS nanoparticles over ZnO nanoplates which later is supported by an increase in optical absorbance and shift in band edge. About 400% increase in solar conversion efficiency with this cascade arrangement is achieved when compared with without CdS which could be fascinating while designing solid state solar cells in presence of suitable p-type layer.     

Upper rim appended hybrid calixarenes via click chemistry

We report the application of "click" chemistry for the synthesis of hybrid calixarenes appended on the upper rim with carbohydrate and N,C-protected alpha-amino acids. The chemoselective N- or C-deprotection of the alpha-amino acids and their subsequent transformation into dipeptides is described. The first example of a chemo-enzymatic synthesis on upper rim derived calix[4]arenes using trans-sialidase affords sialylated lactose calix[4]arenes. Our innovative chemo-enzymatic process paves the way for further applications.     

Techno-commercial aspects of food irradiation in India

Research and development work has been carried out at Food Technology Division of Bhabha Atomic Research Center for more than past fifty years. After establishing potential commercial applications, a lot of time and efforts were spent on proving the wholesomeness and nutritional adequacy of irradiated foods. The first approval from health authorities came in 1994 for processing potato, onion and spices. Additional commodities were approved in 1998 and 2001, bringing the list of commodities to more than 20. Two technology demonstration plants were set up by the government, one for high dose applications like microbial decontamination of spices and dry vegetables in 2000, and another for low dose applications, like sprout inhibition and insect disinfestation, in 2003. In 2004, irradiation was approved as a quarantine measure. This enabled export of mango to USA after a gap of 18 years in 2007. More than a dozen plants have now been set up by private entrepreneurs in the country.