Photocatalytic performance of nano-ZnTiO3 decorated with Ag/AgCl nanoparticles for degradation of the organic dyes

Research on Chemical Intermediates - Ag/AgCl/ZnTiO3 nanohybrids were assembled by the photoreduction–precipitation assisted with ultrasonic method. Rhodamine B (RhB), methylene blue (MB) and...     

Experimental research of effects of different rotation radii on the growth rate of potassium dihydrogen phosphate crystals

Comparing with the traditional concentric rotation method (rotation radius is 0 cm), the effects of different rotation radii on the growth rate of KDP crystals were studied by experimental methods. It was found that with the increase of rotation radius from 0 cm, the growth rate of each direction of crystals first increased and then decreased in a size‐unchanged vessel. The smaller the distance between the crystal and vessel wall, the less the growth rate. This phenomenon was named the “wall collision effect”. Also, the value of growth rate reached a maximum when the rotation radius was about half of its allowable largest value in the size‐unchanged vessel. In addition, an increase of the rotation radius could improve the crystal growth rate under the same linear velocity of crystal movement. Finally, the uniformity of crystal growth has also been analyzed compared with the concentric rotation radius. It was found that the uniformity of crystal growth was best when the rotation radius was half of its allowable maximum value, and it was more conducive to the actual application of KDP crystals.     

Si-O-C骨架支撑型高循环性能锂离子电池硅基负极材料

通过经济有效的方法制备得到一种具有长循环寿命的高效稳定性硅/硅氧碳/无定形碳的复合负极材料结构. 在这种结构中,以具有稳定化学性能的硅氧碳结构作为骨架,来支撑和隔离硅纳米颗粒结构. 材料中包含的无定形碳组分可提高硅/硅氧碳结构的电导性能. 这种复合负极结构在0.3C电流充放电情况下,不仅能发挥出637.3 mAh·g^-1的比容量,而且在经过100 周的充放电循环后,其容量保持率也达到86%. 这种新型硅基负极材料的设计为其他功能材料的设计提供了一种潜在可能的方法.     

超级电容器石墨烯-聚苯胺复合材料的研究进展

超级电容器具有功率密度高、充放电速度快、循环寿命长和维护成本低的特点,在电动车动力电池领域具有潜在的应用前景。超级电容器性能主要由其电极材料所决定。聚苯胺易合成、理论比容量高,而且导电性能优异,作为超级电容器电极材料有很高的应用价值。但是,在长期使用过程中,它的体积容易发生膨胀或收缩,循环寿命差。为了解决这个问题,将聚苯胺与石墨烯复合可以扬长避短,充分利用两者之间的协同效应,赋予复合材料优异电化学电容性能。本文综述了超级电容器用石墨烯-聚苯胺复合材料的制备方法,包括原位聚合法、油水界面合成法、电化学合成法、层层自组装法等;提出了三维网状石墨烯和对石墨烯-聚苯胺复合材料进行改性来提高复合材料的电化学电容性能的思路。     

Substrate-Induced Dimerization Assembly of Chiral Macrocycle Catalysts toward Cooperative Asymmetric Catalysis

An artificial system of substrate-induced dimerization assembly of chiral macrocycle catalysts enables a highly cooperative hydrogen-bonding activation network for efficient enantioselective transformation. These macrocycles contain two thiourea and two chiral diamine moieties and dimerize with sulfate to form a sandwich-like assembly. The macrocycles then adopt an extended conformation and reciprocally complement the hydrogen-bonding interaction sites. Inspired by the guest-induced dynamic assembly, these macrocycles catalyze the decarboxylative Mannich reaction of cyclic aldimines containing a sulfamate heading group. The imine substrate can be activated toward nucleophilic attack of β-ketoacid by a cooperative hydrogen-bonding network enabled by sulfamate-induced dimerization assembly of the macrocycle catalysts. Highly efficient (>95 % yield in most cases) and enantioselective (up to 97.5:2.5 er) transformation of a variety of substrates using only 5 mol % macrocycle was achieved.     

部分还原二氧化钛的NMR和EPR研究

Partially reduced TiO₂ nanomaterials have attracted significant interest because of their visible-light activity for catalysis and photodegradation. Herein, we prepared a partially reduced anatase TiO₂ (Re-A-TiO₂) nanoparticle material using a fast combustion method, demonstrating good activity toward decomposing methyl orange under visible light irradiation. The surface structure of the prepared material, after being surface-selectively ¹⁷O-labeled with H₂¹⁷O (¹⁷O-enriched water), was studied via ¹⁷O and ¹H solid-state magic angle spinning nuclear magnetic resonance (MAS NMR) spectroscopy and electron paramagnetic resonance (EPR) spectroscopy, and the obtained results were compared to those of non-reduced anatase TiO₂ (A-TiO₂). The EPR results showed that the concentrations of paramagnetic species (i.e., oxygen vacancies (OV) and Ti³⁺) in Re-A-TiO₂ were much higher than that in A-TiO₂, while the former was associated with a higher OV/Ti³⁺ ratio. The intensities of the EPR signals were significantly affected by the adsorbed water, and this phenomenon was explored in combination with ¹H NMR spectroscopy. The ¹H species on Re-A-TiO₂ appeared at larger chemical shifts, denoting the increased acidity of the sample, and these ¹H species on Re-A-TiO₂ were more difficult to remove than those on A-TiO₂. On the other hand, different features were observed for the signals arising from the two-coordinated oxygen atoms (μ₂-O) in ¹⁷O NMR, suggesting a typical anatase TiO₂(101) surface on A-TiO₂, but a more complex surface environment for Re-A-TiO₂. Furthermore, a larger amount of hydroxyl groups (OH) were observed on Re-A-TiO₂ compared to that on A-TiO₂, indicating a larger proportion of exposed (001) facets on Re-A-TiO₂. However, the μ₂-O signals broadened and became similar when the drying temperature was increased to 100 ℃, indicating a non-faceted anatase TiO₂ surface in such conditions. Based on the EPR and NMR results, a significant fraction of the OH species is believed to be formed from the reaction of the paramagnetic centers and adsorbed water molecules. The ¹H→¹⁷O cross polarization (CP) MAS and two-dimensional heteronuclear correlation (2D HETCOR) NMR spectra were used to verify the spatial proximity of the hydrogen and oxygen species, confirming the spectral assignments of a strongly adsorbed water and one type of surface OH species. In particular, the ¹H NMR signals at approximately 11 ppm were ascribed to the hydrogen species in the intramolecular hydrogen bond. In summary, this study investigated the paramagnetic species and surface structure of anatase TiO₂ materials by combining EPR along with ¹H and ¹⁷O solid-state NMR spectroscopy. The differences in the surface structures of Re-A-TiO₂ and A-TiO₂ should be closely related to their different properties toward the photodegradation of methyl orange.     

2-(Diphenylphosphino)benzoate-functionalized diiron ethane-1,2-dithiolate complexes with uncoordinated or coordinated phosphine ligand

Abstract

Treatment of the starting complex [Fe₂(CO)₆{μ-SCH₂CH(CH₂OH)S}] (1) with 2-(diphenylphosphino)benzoic acid in the presence of N,N’-dicyclohexylcarbodiimide and 4-dimethylaminopyridine gave the corresponding ester derivative [Fe₂(CO)₆{μ-SCH₂CH(CH₂O₂CC₆H₄PPh₂-2)S}] (2) in 92% yield. Further treatment of complex 2 with one equivalent of Me₃NO · 2?H₂O as the decarbonylating agent yielded diphenylphosphino-substituted complex [Fe₂(CO)₅{μ-SCH₂CH(CH₂O₂CC₆H₄PPh₂-2)S}] (3) in 79% yield. Both complexes were characterized by elemental analysis, spectroscopy, as well as by X-ray crystallography. Additionally, the electrochemical properties of these complexes were studied by cyclic voltammetry.     

微波管内的表面击穿

全面介绍了真空条件下表面击穿的研究状况,重点讨论了二次电子发射雪崩理论,论述了二次电子发射、陶瓷表面处理、磁场、解吸附等因素对表面击穿的影响,并讨论了增加表面击穿电压的各种办法.为研究微波管的人员提供了理论参考.     

CZT晶体用化学机械抛光液的制备及其性能研究

化学机械抛光工艺是碲锌镉(Cadmium Zinc Telluride,CZT)晶体表面处理的关键技术之一.其中,化学机械抛光液是影响晶片表面质量的重要因素.目前用于CZT晶片的抛光液主要是依靠进口的碱性抛光液,这严重制约了我国CZT晶体研究的发展.采用硅溶胶和次氯酸钠(NaClO)溶液作为主要原料,制备了碱性化学机械抛光液.然后采用该抛光液对CZT晶片表面进行了化学机械抛光,并对抛光表面进行了表征.实验结果表明,抛光后晶片表面的粗糙度小于2 nm,因此采用硅溶胶-次氯酸钠碱性抛光液可制备出高质量的CZT抛光表面.     

复合补偿在印制板尺寸变形修正中的应用

印制板生产过程中,基材不可避免会出现平面上的尺寸涨缩变形,业内一般对此种变形进行经验性或基于试制的结果进行反向预补偿,此种预补偿有一定概率达不到预期效果.文章提出通过分区抓取PCB板件的几何中心,并在模拟平面二维线性形变的基础上对PCB成品尺寸变形进行复合补偿,可以有效解决上述问题.