Effect of annealing on structural, optical and electrical properties of nanostructured Ge thin films

Ge thin films with a thickness of about 110 nm have been deposited by electron beam evaporation of 99.999% pure Ge powder and annealed in air at 100-500 °C for 2 h. Their optical, electrical and structural properties were studied as a function of annealing temperature. The films are amorphous below an annealing temperature of 400 °C as confirmed by XRD, FESEM and AFM. The films annealed at 400 and 450 °C exhibit X-ray diffraction pattern of Ge with cubic-F structure. The Raman spectrum of the as-deposited film exhibits peak at 298 cm⁻¹, which is left-shifted as compared to that for bulk Ge (i.e. 302 cm⁻¹), indicating nanostructure and quantum confinement in the as-deposited film. The Raman peak shifts further towards lower wavenumbers with annealing temperature. Optical band gap energy of amorphous Ge films changes from 1.1 eV with a substantial increase to ∼1.35 eV on crystallization at 400 and 450 °C and with an abrupt rise to 4.14 eV due to oxidation. The oxidation of Ge has been confirmed by FTIR analysis. The quantum confinement effects cause tailoring of optical band gap energy of Ge thin films making them better absorber of photons for their applications in photo-detectors and solar cells. XRD, FESEM and AFM suggest that the deposited Ge films are composed of nanoparticles in the range of 8-20 nm. The initial surface RMS roughness measured with AFM is 9.56 nm which rises to 12.25 nm with the increase of annealing temperature in the amorphous phase, but reduces to 6.57 nm due to orderedness of the atoms at the surface when crystallization takes place. Electrical resistivity measured as a function of annealing temperature is found to reduce from 460 to 240 Ω-cm in the amorphous phase but drops suddenly to 250 Ω-cm with crystallization at 450 °C. The film shows a steep rise in resistivity to about 22.7 KΩ-cm at 500 °C due to oxidation. RMS roughness and resistivity show almost opposite trends with annealing in the amorphous phase.     

One-pot access to indolo[2,3-b]quinolines by electrophile-triggered cross-amination/Friedel-Crafts alkylation of indoles with 1-(2-tosylaminophenyl)ketones

Activation of C2 and C3 of indoles by molecular iodine (I(2)) and base followed by in situ reaction with 1-(2-tosylaminophenyl)ketones or 2-tosylaminobenzaldehyde can afford highly substituted indolo(2,3-b)quinolines in moderate to excellent yields (up to 99%). The reaction provides a metal-free selective difunctionalization of indoles. The synthetic potential of the protocol has been illustrated by the synthesis of neocryptolepine and its 11-methyl analogue.     

Optical solitons and complexitons of the Schrödinger–Hirota equation

The Schrödinger–Hirota equation governs the propagation of optical solitons in a dispersive optical fiber. In this paper, this equation will be solved by the ansatz method for bright and dark 1-soliton solution. The power law nonlinearity will be assumed. By using the tanh method, some additional solutions will be derived. Finally, the numerical simulations will be given.     

Synthesis,Characterization, In Vitro Anticancer Potentiality,and Antimicrobial Activities of Novel Peptide–Glycyrrhetinic-Acid-Based Derivatives

Glycyrrhetinic acid (GA) is one of many interesting pentacyclic triterpenoids showing significant anticancer activity by triggering apoptosis in tumor cell lines. This study deals with the design and synthesis of new glycyrrhetinic acid (GA)–amino acid peptides and peptide ester derivatives. The structures of the new derivatives were established through various spectral and microanalytical data. The novel compounds were screened for their in vitro cytotoxic activity. The evaluation results showed that the new peptides produced promising cytotoxic activity against the human breast MCF-7 cancer cell line while comparing to doxorubicin. On the other hand, only compounds 3, 5, and 7 produced potent activity against human colon HCT-116 cancer cell line. The human liver cancer (HepG-2) cell line represented a higher sensitivity to peptide 7 (IC₅₀; 3.30 μg/mL), while it appeared insensitive to the rest of the tested peptides. Furthermore, compounds 1, 3, and 5 exhibited a promising safety profile against human normal skin fibroblasts cell line BJ-1. In order to investigate the mode of action, compound 5 was selected as a representative example to study its in vitro effect against the apoptotic parameters and Bax/BCL-2/p53/caspase-7/caspase-3/tubulin, and DNA fragmentation to investigate beta (TUBb). Additionally, all the new analogues were subjected to antimicrobial assay against a panel of Gram-positive and Gram-negative bacteria and the yeast candida Albicans. All the tested GA analogues 1–8 exhibited more antibacterial effect against Micrococcus Luteus than gentamicin, but they exhibited moderate antimicrobial activity against the tested bacterial and yeast strains. Molecular docking studies were also simulated for compound 5 to give better rationalization and put insight to the features of its structure.     

Supercontinuum generation at 1.55μm using highly nonlinear photonic crystal fiber for telecommunication and medical applications

In this paper, we present a theoretical calculation of a highly nonlinear germanium (Ge) doped photonic crystal fiber with all-normal group velocity dispersion to design a supercontinuum (SC) light source at 1.55 μm. By doping 3% higher refractive index Ge inside the host silica, the nonlinear coefficient is increased to a value as large as 60.5 W^?1 km^?1 at 1.55 μm. A 10 dB bandwidth of a 120 nm SC spectrum for a 2.5 ps input optical pulse and a 10 dB bandwidth of a 190 nm SC spectrum for a 1.0 ps input optical pulse have been found using the same fiber length of 200m and input optical power of 18 W. The coherent lengths of the generated SC light sources are found to be 8.8 μm for a 2.5 ps input optical pulse and 5.6 μm for a 1.0 ps input optical pulse. Therefore, the highest longitudinal resolution at 1.55 μm is found to be about 4.0 μm for biological tissues.     

Holography based super resolution

This paper describes the simulation of a simple technique of superresolution based on holographic imaging in spectral domain. The input beam assembly containing 25 optical fibers with different orientations and positions is placed to illuminate the object in the 4f optical system. The position and orientation of each fiber is calculated with respect to the central fiber in the array. The positions and orientations of the fibers are related to the shift of object spectrum at aperture plane. During the imaging process each fiber is operated once in the whole procedure to illuminate the input object transparency which gives shift to the object spectrum in the spectral domain. This shift of the spectrum is equal to the integral multiple of the pass band aperture width. During the operation of single fiber (ON-state) all other fibers are in OFF-state at that time. The hologram recorded by each fiber at the CCD plane is stored in computer memory. At the end of illumination process total 25 holograms are recorded by the whole fiber array and by applying some post processing and specific algorithm single super resolved image is obtained. The superresolved image is five times better than the band-limited image. The work is demonstrated using computer simulation only.     

Multivariate regression estimates for finite populations

The theory on regression estimate based on one auxiliary variable has been extended to that for more than one auxiliary variable. It has been found that the multivariate regression estimate (MRE) is not unbiased in general. The form of the approximate standard error of MRE is the same as that of simple regression estimate based on one auxiliary variable with the exception that the multiple correlation coefficient replaces the total correlation coefficient in the expression. It has also been found that the precision of MRE is non-decreasing, rather usually increasing as the number of auxiliary variables correlated with the dependent variable increases, assuming sample size to be large compared to the number of auxiliary variables.     

The effect of fabrication parameters on a ridge Mach-Zehnder interferometric (MZI) modulator

A study of Mach-Zehnder interferometer (MZI) modulators using unetched and etched Ti:LiNbO/sub 3/ waveguides has been made. A full vectorial finite-element-based mode solver was used, followed by a finite element-based solution of the Laplace equation to calculate the electrooptic effect and, subsequently, the half-wave voltage, V/sub /spl pi// The optical loss due to the metal electrodes was also found using the H-field finite-element method (FEM) incorporating the perturbation method. The microwave effective index, n/sub m/, and the characteristic impedance of the metal electrodes, Z/sub c/, were also found for a number of electrode thicknesses and ridge heights. A semivectorial finite-element beam propagation method (SVFEBPM) was used to estimate the radiation loss for the curved input and output (I/O) waveguides of the MZI. The device characteristics were then studied by making changes to a number of fabrication parameters, of which the two most important were found to be the etch depth of the ridge and the thickness of the SiO/sub 2/ buffer layer.     

New method of resistance measurement

A new method of resistance measurement is reported. A transistor-resistor negative-resistance device has been used for resistance measurements in the range 103?107 ?, with an accuracy within ± 1%. The performance of this new method is compared the with conventional 4-point voltmeter-ammeter method.     

An inter-laboratory comparison study for the determination of copper and lead from the wastewater of printed circuit board manufacturing industry in Pakistan

This inter-laboratory comparison study was arranged for 28 laboratories from different public and private sector organizations in Pakistan having wastewater testing capabilities aimed at improving the quality and comparability of test results. This national inter-laboratory study was started in December 2003 and completed in July 2004. Laboratories were invited to analyze the wastewater collected from printed circuit board (PCB) industry for lead and copper contamination. The samples fulfill the criteria for homogeneity and stability as done by the reference laboratory. The results obtained from participating laboratories were analyzed in terms of Hampel Test for outliers, while the performance evaluation of the participating laboratories was done on the basis of Z-score. An assigned value derived from the participant's results was compared with a reference value provided by a reference laboratory. Overall >50% of the participating laboratories have shown good performance in this PT-program