Substituent electronic effects on the persistence and absorption spectra of (Z)-o-xylylenols. A nanosecond laser flash photolysis study

[reaction: see text] A systematic investigation on a broad set of aldehydes reveals that the lifetimes of (Z)-photoenols can be modulated by variation of the substituents. We have found that the lifetimes of (Z)-enols (in benzene) can be varied by more than 1 order of magnitude with a judicious choice of the substituents that exert mesomeric and inductive effects as, for example, in the case of pentamethylbenzaldehyde (tau = 35 ns) and dicyanomesitaldehyde (tau = 760 ns). This study thus points to the fact that the electronic factors in conjunction with hydrogen bonding stabilization can considerably broaden the uni- as well as bimolecular chemistry based on photoenolization. Further, we have shown that the photoenols exhibit dramatic shifts in their absorption properties with variation of the substituents; although the photoenols have long been considered to be colored, their absorption properties have not been heretofore comprehensively examined.     

Synthesis of the southern furan segment of furanocembranoids

Abstract

A convergent synthesis of the southern furan segment of novel furanocembranoids from Croton oblongifolius has been accomplished involving silver-catalyzed cyclization of alkynyl diol as the key step towards 2, 5-disubstituted furan ring formation.     

Bond dissociation energies and bond orders for diatomic alkali halides

The bond dissociation energies for Alkali halides have been estimated based on the derived relations: $$\begin{gathered} D_{AB} = \bar D_{AB} + 31.973{\text{ e}}^{0.363\Delta x} {\text{ and}} \hfill \\ D_{AB} = \bar D_{AB} (1 - 0.2075\Delta xr_e ) + 52.29\Delta x, \hfill \\ \end{gathered} $$ where \(\bar D_{AB} = (D_{AA} \cdot D_{BB} )^{{1 \mathord{\left/ {\vphantom {1 2}} \right. \kern-0em} 2}} \) , Δx represents Pauling electronegativity differences x(_A ?x_B) and r _e is the internuclear distance. A simplified formula relating bond orders, q, to spectroscopic constants is suggested. The formula has the form q = 1.5783 × 10^?3 (ω _e ² r_e/ B_e)^1/2. The ambiguity arising from the Parr and Borkman relation is discussed. The present study supports the view of Politzer that q/(0.5r _e)² is the correct definition of bond order. The estimated bond energies and bond orders are in reasonably good agreement with the literature values. The bond energies estimated with the relations we suggested, for alkali halides give an error of 4.5% and 5.3%, respectively. The corresponding error associated with Pauling's equation is 40.2%.     

Efficient photocyclization of o-alkylbenzaldehydes in the solid state: direct observation of E-xylylenols en route to benzocyclobutenols

The photocyclization to benzocyclobutenols of o-alkyl aromatic aldehydes that are predestined for gamma-hydrogen abstraction is found to occur efficiently in the solid state; in contrast, solution-phase photolysis is known to afford a mixture of several products. It is shown that mesitaldehyde, which is a liquid, also undergoes efficient cyclization when subjected to photolysis as a solid inclusion complex. The marginal energy differences in the relative energies of the E-enols and the corresponding cyclobutenols in the case of cyano-substituted mesitaldehydes has permitted direct observation, for the first time, of the E-enols en route to benzocyclobutenols. The AM1 calculations suggest that the cyano-substitution causes intrinsic stabilization of the E-enols relative to the corresponding cyclobutenols, while the bromo groups do the opposite. The lack of observation of the red color in bromo- and formyl-substituted aldehydes is attributed to rapid cyclization of the E-enols to the their respective cyclobutenols even at low temperatures.     

Designer ribozymes: programming the tRNA specificity into flexizyme

Fx3 is an artificial ribozyme with the ability to aminoacylate various tRNAs with phenylalanine and its nonnatural derivatives. Herein we report a simple strategy to build tRNA specificity into the generic Fx3, by appending to its 3'-end a tRNA-specific sequence (TSS), which is complementary to the acceptor stem of the cognate tRNA. This new designer ribozyme, referred to as Fx10, is able to recognize its cognate tRNA via a 10-base-pair interaction that is formed after the invasion of the tRNA acceptor stem by the TSS. We have demonstrated that Fx10 can aminoacylate its cognate tRNA with a high degree of specificity and also discriminate against the noncognate tRNAs. Because the tRNA specificity can be easily programmed into Fx10, it is a custom-made catalyst to generate nonnatural aminoacyl-tRNAs.     

Investigation of the reactions of fluorinated isatins and N-acetylisatins with thiocarbohydrazide: Synthesis of a novel spiro system: 2-oxo-1′,2′,4′,5′-tetrahydrospiro[3H-indole-3,3′-1,2,4,5-tetrazine]-6′-thione

A novel system 2-oxo-1′,2′,4′,5′-tetrahydrospiro[3H-indole-3,3′-1,2,4,5-tetrazine]-6′-thione has been synthesized by the treatment of fluorinated isatins with thiocarbohydrazide in aqueous ethanolic medium. Under exactly similar conditions, N-acetylisatin gave exclusively thiocarbohydrazone. The spiro product, on treatment with acetic acid, gave fluorinated isoindigo. Characterization of these products have been done by elemental analyses, ir, pmr and mass spectral studies.     

A study of 1O2 production by immobilized sensitizer outside the solution. Measurement of 1O2 generation

Abstract— Recently, a new technique of ¹O₂ generation has been described by Midden and Wang. The sensitizer is immobilized on silica gel particles which are attached on one surface of a glass plate which is placed, sensitizer-side down, above a solution leaving a small air space between the sensitizer and the solution. Applying the principle of the technique, i.e. generation of ¹O₂ in the gas phase above the solution, we first improved the long-term stability of the dye (rose bengal) by using double stock transparent tape instead of rubber cement. Under these conditions, although the initial rate of production was higher in rubber cement, the rate of production reached a plateau after 30 min, whereas with double stick transparent tape, the rate of generation was linear up to 100 min. This result was explained by the fact that silica glass beads are embedded in the cement which could lead to the bleaching reaction of the dye. Different reactions have been investigated, the bleaching of N,N-dimethyl-4-nitrosoaniline (RNO) in the presence of imidazole, destruction of anthracenedipropionic acid, formation of a stable nitroxide from a sterically hindered secondary amine and the influence of pH on the nitroxide yield. The yield was measured to be 5 × 10¹² molecules of singlet oxygen produced per second per cm² from the surface of the plate using the RNO bleaching reaction. This method of generating ¹O₂ also seems promising for studying the killing of mammalian cells by ¹O₂ as the sole damaging species.     

Synthesis and DNA binding properties of pyrrole amino acid-containing peptides

Dimers of the pyrrole amino acid (Paa), 5-(aminomethyl)pyrrole-2-carboxylic acid, and its derivatives having Lys anchored on N- and C-termini bind in the minor groove of DNA with considerable apparent binding affinities. When the Lys unit is attached to the C-terminus, the resulting ligand binds to ds-DNA with twice the affinity, of the order of 10⁵, than the one carrying two positive charges at the same end.     

Phosphoramidite approach for the synthesis of cardiolipin

A phosphoramidite approach was utilized for the first time to synthesize cardiolipin. Optically active 1,2-di-O-acyl-sn-glycerol was coupled with 2-O-protected glycerols utilizing mono- and bifunctional phosphitylating agents to yield, after final removal of protecting groups, the title compound.     

Cellulose synthesis in maize: isolation and expression analysis of the cellulose synthase (CesA) gene family

Stalk lodging in maize results in significant yield losses. We have determined that cellulose per unit length of the stalk is the primary determinant of internodal strength. An increase in cellulose concentration in the wall might allow simultaneous improvements in stalk strength and harvest index. Cellulose formation in plants can be perturbed by mutations in the genes involved in cellulose synthesis, post-synthetic cellulose alteration or deposition, N-glycosylation, and some other genes with as yet unknown functions. We have isolated 12 members of the cellulose synthase (CesA) gene family from maize. The genes involved in primary wall formation appear to have duplicated relatively independently in dicots and monocots. The deduced amino acid sequences of three of the maize genes, ZmCesA10–12, cluster with the Arabidopsis CesA sequences that have been shown to be involved in secondary wall formation. Based on their expression patterns across multiple tissues, these three genes appear to be coordinately expressed. The remaining genes show overlapping expression to varying degrees with ZmCesA1, 7, and 8 forming one group, ZmCesA3 and 5 a second group, and ZmCesA2 and 6 exhibiting independent expression of any other gene. This suggests that the varying levels of coexpression may just be incidental except in the case of ZmCesA10–12, which may interact with each other to form a functional enzyme complex. Isolation of the expressed CesA genes from maize and their association with primary or secondary wall formation has made it possible to test their respective roles in cellulose synthesis through mutational genetics or transgenic approaches. This information would be useful in improving stalk strength.