Feasibility of gas chromatography-microchip atmospheric pressure photoionization-mass spectrometry in analysis of anabolic steroids

Mass spectrometers equipped with atmospheric pressure ion sources (API-MS) have been designed to be interfaced with liquid chromatographs (LC) and have rarely been connected to gas chromatographs (GC). Recently, we introduced a heated nebulizer microchip and showed its potential to interface liquid microseparation techniques and GC with API-MS. This study demonstrates the feasibility of GC-microchip atmospheric pressure photoionization-tandem mass spectrometry (GC-μAPPI-MS/MS) in the analysis of underivatized anabolic steroids in urine. The APPI microchip provides high ionization efficiency and produces abundant protonated molecules or molecular ions with minimal fragmentation. The feasibility of GC-μAPPI-MS/MS in the analysis of six selected anabolic steroids in urine samples was studied with respect to intra-batch repeatability, linearity, linear range, and limit of detection (LOD). The method showed good sensitivity (LODs 0.2-1 ng/mL), repeatability (relative standard deviation<10%), and linearity (regression coefficient≥0.9995) and, therefore, high potential for the analysis of anabolic steroids. Quantitative performance of the method was tested with two authentic urine samples, and the results were in good agreement with those obtained with conventional GC-electron ionization-MS after derivatization.     

Octanuclear gold(I) alkynyl-diphosphine clusters showing thermochromic luminescence

The unprecedented, purely gold(I) alkynyl-diphosphine clusters 1-3 demonstrate intense room-temperature phosphorescence with maximum quantum efficiency of 92% in solution (3) and 86% in solid (2) and thermally dependent emission in the crystalline form, attributed to the crystal lattice arrangement.     

Photofragmentation of 2‐Deoxy‐D‐Ribose Molecules in the Gas Phase

We have measured the synchrotron‐induced photofragmentation of isolated 2‐deoxy‐D ‐ribose molecules (C₅H₁₀O₄) at four photon energies, namely, 23.0, 15.7, 14.6, and 13.8 eV. At all photon energies above the molecule′s ionization threshold we observe the formation of a large variety of molecular cation fragments, including CH₃⁺, OH⁺, H₃O⁺, C₂H₃⁺, C₂H₄⁺, CH_xO⁺ (x=1,2,3), C₂H_xO⁺ (x=1–5), C₃H_xO⁺ (x=3–5), C₂H₄O₂⁺, C₃H_xO₂⁺ (x=1,2,4–6), C₄H₅O₂⁺, C₄H_xO₃⁺ (x=6,7), C₅H₇O₃⁺, and C₅H₈O₃⁺. The formation of these fragments shows a strong propensity of the DNA sugar to dissociate upon absorption of vacuum ultraviolet photons. The yields of particular fragments at various excitation photon energies in the range between 10 and 28 eV are also measured and their appearance thresholds determined. At all photon energies, the most intense relative yield is recorded for the m/q=57 fragment (C₃H₅O⁺), whereas a general intensity decrease is observed for all other fragments— relative to the m/q=57 fragment—with decreasing excitation energy. Thus, bond cleavage depends on the photon energy deposited in the molecule. All fragments up to m/q=75 are observed at all photon energies above their respective threshold values. Most notably, several fragmentation products, for example, CH₃⁺, H₃O⁺, C₂H₄⁺, CH₃O⁺, and C₂H₅O⁺, involve significant bond rearrangements and nuclear motion during the dissociation time. Multibond fragmentation of the sugar moiety in the sugar–phosphate backbone of DNA results in complex strand lesions and, most likely, in subsequent reactions of the neutral or charged fragments with the surrounding DNA molecules.     

Preparation of indole-phosphine oxazoline (IndPHOX) ligands and their application in allylic alkylation

Two classes of indole-phosphine oxazoline ligands have been prepared from readily available starting materials in good overall yields. These modular ligands include an indole skeleton with either a phosphine moiety or an oxazoline ring at the 2- or 3-position, respectively. The utility of these ligands was demonstrated in a catalytic asymmetric reaction: the palladium-catalyzed allylic alkylation of 1,3-diphenyl-2-propenyl acetate with dimethyl malonate was performed with enantioselectivities as high as 98%.     

Effect of microfibrillated cellulose and fines on the drainage of kraft pulp suspension and paper strength

Different types of microfibrillated cellulose (MFC) and fines suspensions were produced, characterized, and then added to a papermaking pulp suspension. High and medium molar mass cationic polyelectrolytes were used as fixatives. The drainage behavior of the pulp suspensions with additives were evaluated against the strength properties of hand sheets made thereof. The effects of salt concentration, pH, fixative type, dosage and type of fibrillar material on drainage were examined. All the MFC and fines samples produced had clearly different properties due to their dissimilar production methods, and they also introduced specific responses on the measured drainage and paper strength. Generally, the addition of MFC decreased the drainage rate of pulp suspension and increased the strength of paper. However, it was shown that by optimum selection of materials and process conditions an enhancement of the strength properties could be achieved without simultaneously deteriorating the drainage.     

Using chemometrics for navigating in the large data sets of genomics, proteomics, and metabonomics (gpm)

This article describes the applicability of multivariate projection techniques, such as principal-component analysis (PCA) and partial least-squares (PLS) projections to latent structures, to the large-volume high-density data structures obtained within genomics, proteomics, and metabonomics. PCA and PLS, and their extensions, derive their usefulness from their ability to analyze data with many, noisy, collinear, and even incomplete variables in both X and Y. Three examples are used as illustrations: the first example is a genomics data set and involves modeling of microarray data of cell cycle-regulated genes in the microorganism Saccharomyces cerevisiae. The second example contains NMR-metabonomics data, measured on urine samples of male rats treated with either of the drugs chloroquine or amiodarone. The third and last data set describes sequence-function classification studies in a set of G-protein-coupled receptors using hierarchical PCA.     

Comparing the quality and predictiveness between 3D QSAR models obtained from manual and automated alignment

A set of 113 flexible cyclic urea inhibitors of human immunodeficiency virus protease (HIV-1 PR) was used to compare the quality and predictive power of CoMFA and CoMSIA models for manually or automatically aligned inhibitor set. Inhibitors that were aligned automatically with molecular docking were in agreement with information obtained from existing X-ray structures. Both alignment methods produced statistically significant CoMFA and CoMSIA models, with the best q(2) value being 0.649 and the best predictive r(2) being 0.754. The manual alignment gave statistically higher values, whereas the automated alignment gave more robust models for predicting the activities of an external inhibitor set. Both models utilized similar amino acids in the HIV-1 PR active site, supporting the idea that hydrogen bonds form between an inhibitor and the backbone carbonyl oxygens of Gly48 and Gly48' and also the backbone NH group of Asp30, Gly48, Asp29', and Gly48' of the enzyme. These results suggest that an automated inhibitor alignment can yield predictive 3D QSAR models that are well comparable to manual methods. Thus, an automated alignment method in creating 3D QSAR models is encouragable when a well-characterized structure of the target protein is available.     

Hybrid Supramolecular and Colloidal Hydrogels that Bridge Multiple Length Scales

Hybrid nanocomposites were constructed based on colloidal nanofibrillar hydrogels with interpenetrating supramolecular hydrogels, displaying enhanced rheological yield strain and a synergistic improvement in storage modulus. The supramolecular hydrogel consists of naphthyl‐functionalized hydroxyethyl cellulose and a cationic polystyrene derivative decorated with methylviologen moieties, physically cross‐linked with cucurbit[8]uril macrocyclic hosts. Fast exchange kinetics within the supramolecular system are enabled by reversible cross‐linking through the binding of the naphthyl and viologen guests. The colloidal hydrogel consists of nanofibrillated cellulose that combines a mechanically strong nanofiber skeleton with a lateral fibrillar diameter of a few nanometers. The two networks interact through hydroxyethyl cellulose adsorption to the nanofibrillated cellulose surfaces. This work shows methods to bridge the length scales of molecular and colloidal hybrid hydrogels, resulting in synergy between reinforcement and dynamics.     

F‐bridged Anions of Bromine and Gold: Predictions of Unexpected Behavior

The significant similarity between MF₃, MF₄^–, and M₂F₇^– (M = Au, Br) is studied using quantum chemical methods. It is expected that compounds containing Au₃F₁₀^– anions are likely to be stable. A theoretical background for the ongoing attempts of their synthesis is provided by calculations on the stabilities and molecular structures of various bromine and gold anions with the general composition of M_nF_3n+1^– (n = 1, 2, 3, 4). The anions show unexpected differences and peculiarities in their energetically preferable molecular structures. Different chain‐like structures are predicted as the global minima for the hypothetical Au₃F₁₀^– and Br₄F₁₃^– anions.     

A Facile Molecular Machine: Optically Triggered Counterion Migration by Charge Transfer of Linear Donor‐π‐Acceptor Phosphonium Fluorophores

The D‐π‐A type phosphonium salts in which electron acceptor (A=‐⁺PR₃) and donor (D=‐NPh₂) groups are linked by polarizable π‐conjugated spacers show intense fluorescence that is classically ascribed to excited‐state intramolecular charge transfer (ICT). Unexpectedly, salts with π=‐(C₆H₄)_n‐ and ‐(C₁₀H₆C₆H₄)‐ exhibit an unusual dual emission (F₁ and F₂ bands) in weakly polar or nonpolar solvents. Time‐resolved fluorescence studies show a successive temporal evolution from the F₁ to F₂ emission, which can be rationalized by an ICT‐driven counterion migration. Upon optically induced ICT, the counterions move from ‐⁺PR₃ to ‐NPh₂ and back in the ground state, thus achieving an ion‐transfer cycle. Increasing the solvent polarity makes the solvent stabilization dominant, and virtually stops the ion migration. Providing that either D or A has ionic character (by static ion‐pair stabilization), the ICT‐induced counterion migration should not be uncommon in weakly polar to nonpolar media, thereby providing a facile avenue for mimicking a photoinduced molecular machine‐like motion.