Continuous‐Flow Microwave Synthesis of Metal–Organic Frameworks: A Highly Efficient Method for Large‐Scale Production

Metal–organic frameworks are having a tremendous impact on novel strategic applications, with prospective employment in industrially relevant processes. The development of such processes is strictly dependent on the ability to generate materials with high yield efficiency and production rate. We report a versatile and highly efficient method for synthesis of metal–organic frameworks in large quantities using continuous flow processing under microwave irradiation. Benchmark materials such as UiO‐66, MIL‐53(Al), and HKUST‐1 were obtained with remarkable mass, space–time yields, and often using stoichiometric amounts of reactants. In the case of UiO‐66 and MIL‐53(Al), we attained unprecedented space–time yields far greater than those reported previously. All of the syntheses were successfully extended to multi‐gram high quality products in a matter of minutes, proving the effectiveness of continuous flow microwave technology for the large scale production of metal–organic frameworks.     

Size‐Selective Encapsulation of Hydrophobic Guests by Self‐Assembled M4L6 Cobalt and Nickel Cages

Subtle differences in metal–ligand bond lengths between a series of [M₄L₆]^4? tetrahedral cages, where M=Fe^II, Co^II, or Ni^II, were observed to result in substantial differences in affinity for hydrophobic guests in water. Changing the metal ion from iron(II) to cobalt(II) or nickel(II) increases the size of the interior cavity of the cage and allows encapsulation of larger guest molecules. NMR spectroscopy was used to study the recognition properties of the iron(II) and cobalt(II) cages towards small hydrophobic guests in water, and single‐crystal X‐ray diffraction was used to study the solid‐state complexes of the iron(II) and nickel(II) cages.     

The role of MFC/NFC swelling in the rheological behavior and dewatering of high consistency furnishes

The influence of swelling on the rheological and dewatering properties of high consistency nanocellulose based furnishes is considered. Different consistencies of suspensions (1–4 %) and furnishes (5–15 %) were prepared made of two distinctly different grades of nanocellulose containing, micro fibrillated (MFC) and nanofibrillated (NFC) cellulose, and systematic comparison between the rheological and dewatering parameters was conducted. The characterization of the rheological and dewatering properties was performed with a stress controlled rheometer combined with an immobilization cell in parallel plate geometry, as well as with an independent gravimetric dewatering device. The surface charge of nanofibrillated cellulose was found to influence the rheological and dewatering properties of the evaluated suspensions and furnishes due to its impact on swelling and effectively bound water. Due to the complex behavior of the novel materials, the immobilization times were difficult to determine from the changes in the damping factor, as often used for coating colors. Instead, we propose a modified method for determination of immobilization times based on a rheological analysis adopting the rate of change in viscoelastic loss factor over time, d(tan δ = G′′/G′)/dt, describing the critical point(s) in the ratio of the viscous to elastic stress response moduli. With this approach we show that it is possible to characterize immobilization of these materials incorporating the concept of the combined physical interactions of the components and the non-removable bound water, without requiring a direct measure of the nanocellulose surface swelling. Based on the results, we hypothesize that fibrillar swelling impacts the dewatering of MFC and NFC suspensions, and furnishes containing them, by an interfiber pore connectivity blocking/sealing mechanism, which effectively defines the immobilization of the material matrix at the end point of free water extraction caused by the physical blocking imposed by the remaining bound water.     

A Comprehensive Study on the Full Series of Alkali-Metal Selenocyanates AI[SeCN] (AI=Li−Cs)

The full series of quasibinary alkali-metal selenocyanates was synthesized either by oxidation of the respective cyanides (A=Li−Rb) or by metathesis (A=Cs). For Li[SeCN] only ball-milling and subsequent annealing led to the isolation of the quasibinary selenocyanate. Their structures were refined from single-crystal and powder X-ray data. The respective solid-state IR and Raman spectra were interpreted with the aid of solid-state quantum-mechanical calculations and DSC-TGA measurements allowed for extraction of melting points. Only for Li[SeCN] a possible phase transition was observed that is discussed on the basis of VT-PXRD experiments. It is also the only quasibinary selenocyanate to form a hydrate (Li[SeCN] ⋅ 2H₂O).     

Hydrophobic modification of nanocellulose and all-cellulose composite films using deep eutectic solvent as a reaction medium

Cellulose - In this work, deep eutectic solvent (DES) based on imidazole and triethylmethylammonium chloride was used as a reaction medium for the esterification of cellulose nanofiber (CNF) and...     

Enhanced performance in the deteriorated area of multicrystalline silicon wafers by internal gettering

The deteriorated area of the multicrystalline silicon (mc‐Si) ingots grown by directional solidification, commonly known as the Red Zone, is usually removed before wafering. This area, characterized by poor minority carrier lifetime, is located on the sides, at the top, and the bottom of the mc‐Si ingots. In this study, the effect of internal gettering by oxygen precipitates and structural defects has been investigated on the bottom zone of a mc‐Si ingot. Nucleation and growth of oxygen precipitates as well as low temperature annealing were studied. Photoluminescence imaging, lifetime mapping, and interstitial iron measurements performed by μ‐PCD reveal a considerable reduction of the bottom Red Zone. An improvement of lifetime from below 1 µs to about 20 µs and a reduction of interstitial iron concentration from 1.32 × 10¹³ at/cm³ to 8.4 × 10¹⁰ at/cm³ are demonstrated in this paper. Copyright © 2013 John Wiley & Sons, Ltd.     

Mukaiyama–Michael Reactions with trans‐2,5‐Diarylpyrrolidine Catalysts: Enantioselectivity Arises from Attractive Noncovalent Interactions,Not from Steric Hindrance

The scope of the enantioselective Mukaiyama–Michael reactions catalyzed by trans‐2,5‐diphenylpyrrolidine has been expanded to include both α‐ and β‐substituted enals. However, the rationalization of the observed enantioselectivity is far from obvious since the catalyst is not very sterically hindered. DFT calculations were carried out to rationalize the observed stereoselectivities. Transition states of the C?C bond formation between iminium intermediates and silyloxyfurans were located and their relative energies were used to estimate the stereoselectivity data. We find excellent agreement between the predicted and observed stereoselectivities. The analysis of intermolecular forces reveals that the enantioselectivity is mostly due to stabilizing noncovalent interactions between the reacting partners, not due to steric hindrance. The role of attractive noncovalent interactions in enantioselective catalysis may be underappreciated.