Expedient Diels-Alder assembly of 4-aryl-4-phenylsulfonyl cyclohexanones

The efficient preparation of 4-aryl-4-phenylsulfonyl cyclohexanones, containing a quaternary sulfone-bearing carbon centre, is described. Their synthesis proceeds in 38-78% overall yield by way of three steps: (i) sulfinate alkylation; (ii) methylenation; and (iii) regioselective Diels-Alder condensation with 2-trimethylsiloxybutadiene. The scope and limitations of the one-pot Mannich-type methylenation described were examined.     

Comparison of 17beta-estradiol structures from x-ray diffraction and solution NMR

The NMR-derived structure of estrogen (17beta-estradiol, E2), the drug of choice for postmenopausal women, was compared with a recent literature crystal x-ray structure of Fab-bound E2. 1H and 13C NMR spectra of E2 were acquired in DMSO-d6. Assignments were obtained from an analysis of DQF-COSY, TOCSY, HETCOR, HMQC and HMBC 2D NMR spectra. The 1H and 13C NMR assignments are the first reported for E2 in DMSO-d6. Two solution structures, S1 and S2, were obtained with molecular modeling using NOE constraints. S1 overlaps with the crystal structure for all rings. S2 shows prominent differences in the C-ring (C9--C11--C12--C13) segment, which deviates from a chair conformation, and excellent overlap in the A-, B- and D-rings of E2. The C-ring in S2 adopts a boat conformation as opposed to a chair conformation in the x-ray and S1 structures. The S2 structure is about 6 degrees more twisted than the bound x-ray and S1 models. The S1, S2 and x-ray structures had ring bowing values of 10.1 +/- 0.3, 11 +/- 1 and 10.37 degrees , respectively. Of the 100 solution conformers generated, 83 had S1 conformation and 17 had S2 conformation, with average internal energies of 112 +/- 2 and 141 +/- 2 kcal mol(-1), respectively. The 100 S1- and S2- derived conformers showed a r.m.s.d. of 0.72 A for all atoms. The x-ray, S1 and S2 C18--O17 distances were 2.93, 2.92 +/- 0.01 and 2.93 +/- 0.01 A, respectively, and the O3--O17 distances were 11.06, 11.18 +/- 0.12, and 10.89 +/- 0.05 A, respectively.     

Three-dimensional self-assembly of metallic rods with submicron diameters using magnetic interactions

Metallic rods with submicron diameters that contain disklike ferromagnetic sections self-assemble into highly stable, hexagonally close-packed arrays of rods. The rods were fabricated by electrodeposition in porous alumina membranes and comprised alternating sections of gold and nickel. The thicknesses of the ferromagnetic nickel sections were approximately one-half the diameter of the rods (400 nm); this geometry orients the "easy" axis of magnetization perpendicular to the long axis of the rod. After magnetization of the rods with a rare-earth magnet, followed by sonication of the suspension, the rods spontaneously assembled into three-dimensional (3D) bundles that, on average, contained 15-30 rods. A macroscopic model of the rods suggests that the most stable orientation of the magnetic dipoles for rods in a defect-free, hexagonally close-packed arrangement is in concentric rings with the dipoles oriented head-to-tail. This configuration minimizes the energy of the bundle and does not generate a net dipole for the structure. This work provides a simple demonstration that magnetic interactions between ferromagnetic objects can direct and stabilize the formation of ordered, 3D structures by self-assembly.     

Polymerization of tetraallyl ammonium chloride

The radical polymerization of tetraallyl ammonium chloride (TAAC) was carried out in water using azo-initiator as compared to that of diallyl dimethyl ammonium chloride (DADMAC); the rate of polymerization was quite low for TAAC, around one-third of DADMAC. Kinetic discussion revealed the importance of degradative chain transfer in the polymerization of TAAC. The cyclopolymerizability of TAAC was estimated kinetically as the ability of 5-membered monocyclic radical to form a bicyclic ring, giving the cyclization constant of 21 mol/L at [M] = 2 mol/L. Gelation occurred at around 20% conversion.     

13C NMR/DFT/GIAO studies of phenylene bis(1,3-dioxolanium) dications and 2,4,6-triphenylene tris(1,3-dioxolanium) trication

The o-, m-, and p-phenylene bis(1,3-dioxolanium) dications (4-6) and 2,4,6-triphenylene tris(1,3-dioxolanium) trication (7) have been prepared by the ionization of the corresponding 2-methoxyethyl benzoates in FSO(3)H or CF(3)SO(3)H at 40 and 60 degrees C, respectively. The charge delocalization in these carbocations was probed by (13)C NMR chemical shifts and substantiated by GIAO/DFT calculations. Relatively less charge is delocalized into the aromatic ring of the carbotrication 7. The rotational barrier around the C(+)-Ar bond for carbodications 4 and 5 was also estimated to be 8-10 kcal/mol.     

Anionic synthesis of poly[ethylene methylene bis(4-phenyl-carbamate)-g-acrylonitrile]

A relatively high-molecular-weight polyurethane based on MDI and ethylene glycol was prepared and characterized. This polymer was metalated with sodium hydride in N,N-dimethylformamide (DMF) at about 0°C. Metalation was confirmed principally by spectroscopic identification of the N-methyl derivative obtained by coupling the metalated polymer with methyl iodide. Under appropriate reaction conditions the metalated polyurethane was used for the anionic graft polymerization of the reactive monomers acrylonitrile and ethylene and propylene sulfides. Attempted anionic graft polymerizations with other monomers, including styrene and ethylene and propylene oxides, were unsuccessful. The polyurethane grafted with acrylonitrile was separated by fractionation from accompanying small amounts of polyacrylonitrile, a low-molecular-weight homopolymer. One sample of polyurethane grafted with acrylonitrile was identified by microanalysis, IR, NMR, and increase in weight and was also characterized by differential thermal analysis.     

Synthesis of 1,1-difluoroethylsilanes and their application for the introduction of the 1,1-difluoroethyl group

1,1-Difluoroethysilanes (R₃SiCF₂CH₃, R = Me or Et) were synthesized from 1,1-difluoroethyl phenyl sulfone and chlorosilanes using magnesium metal via reductive 1,1-difluoroethylation. It was confirmed that 1,1-difluoroethylsilanes were effective 1,1-difluoroethylating reagents for carbonyl compounds.     

Studies on the solvent extraction of yttrium thenoyltrifluoroacetonate

Studies of extractions of yttrium from aqueous solution into chloroform, benzene, methyl isobutyl ketone, and mixtures of these solvents, containing thenoyltrifluoroacetone are described. The effects of reagent concentration, added n-butylamine, and added fluoride were investigated. Values of pH$\text{1}\text{2}$ and P_e were determined, and identifications of the involved species are suggested.     

Cell docking inside microwells within reversibly sealed microfluidic channels for fabricating multiphenotype cell arrays

We present a soft lithographic method to fabricate multiphenotype cell arrays by capturing cells within an array of reversibly sealed microfluidic channels. The technique uses reversible sealing of elastomeric polydimethylsiloxane (PDMS) molds on surfaces to sequentially deliver various fluids or cells onto specific locations on a substrate. Microwells on the substrate were used to capture and immobilize cells within low shear stress regions inside channels. By using an array of channels it was possible to deposit multiple cell types, such as hepatocytes, fibroblasts, and embryonic stem cells, on the substrates. Upon formation of the cell arrays on the substrate, the PDMS mold could be removed, generating a multiphenotype array of cells. In addition, the orthogonal alignment and subsequent attachment of a secondary array of channels on the patterned substrates could be used to deliver fluids to the patterned cells. The ability to position many cell types on particular regions within a two dimensional substrate could potentially lead to improved high-throughput methods applicable to drug screening and tissue engineering.     

Anomalous grazing incidence small-angle x-ray scattering studies of platinum nanoparticles formed by cluster deposition

The size evolution of platinum nanoparticles formed on a SiO2/Si(111) substrate as a function of the level of surface coverage with deposited clusters has been investigated. The anisotropic shapes of sub-nanometer-size nanoparticles are changed to isotropic on the amorphous substrate as their sizes increased. Using anomalous grazing incidence small-angle x-ray scattering (AGISAXS), the scattering from nanoparticles on the surface of a substrate is well separated from that of surface roughness and fluorescence. We show that AGISAXS is a very effective method to subtract the background and can provide unbiased information about particle sizes of less than 1 nm.