Acid-catalysed formation of tricyclic N,S-acetals in imidazolinone series based on the use of the unprecedented N-acyliminium ion cascade reaction involving transposition, heterocyclisation and pi-cyclisation

4-Hydroxy-5,5-dimethylimidazolines tethered at N-1 to an aryl sulfide undergo an unprecedented acid-catalysed domino reaction, involving double methyl transposition, heterocyclisation, isomerisation of thiazetidinium ion and, finally, pi-cyclisation. In this way a one-pot synthesis of original tricyclic N,S-acetals was developed. The same triheterocyclic products can be prepared also starting from the corresponding 5-hydroxy isomers (in this case the cascade of reactions does not involve methyl transposition).     

Dithiadiazolium salts as initiators for the cationic ring-opening polymerization of tetrahydrofuran

Mono-, bis- and tris-(1,3,2,4-dithiadiazolium) salts [R-(CNSNS ⁺)_n]_n+[AsF^-₆]_n (R = aryl, n = 1, 2, 3) were found to initiate the cationic ring-opening polymerization of tetrahydrofuran (THF) at room temperature to give clear gels from which the pure polymer was precipitated. 1,3,2,4-Dithiadiazolium cations associated with the hard [AsF₆]^- anion thus constitute a new class of cationic polymerization initiators. The poly(THF) formed by initiation with 1,3,2,4-dithiadiazolium cation was characterized by gel permeation chromatography, infrared spectrophotometry, and ¹³C-NMR spectroscopy. Number-average molecular weights of 198 700 g mol^-1 (polydispersity 1.96) and 190 000 g mol^-1 (polydispersity 1.61) were obtained using [PhCNSNS ] [AsF₆] and [C₆H₃-1,3,5-(CNSNS )₃][AsF₆]₃, respectively, as initiators. The use of multifunctional dithiadiazolium salts as initiators suggests that they may be useful in the preparation of starburst and dendritic polymers. © 1992 John Wiley & Sons, Inc.     

The photoionization detector : Theory, performance and application as a low-level monitor of oil vapour

The photoionization detector (PID) is being developed for the detection of low centrations of oil in the carbon dioxide coolant of gas-cooled reactors. In this paper the theoretical response of the PID is derived and compared with its practical response and with that of the flame ionization detector (FID). The PID response is shown to depend primarily upon ionization potential and molar concentration unlike FID response which depends upon carbon number. The dependence of PID response upon the carrier gas used is discussed and the citerion of detection using the PID to measure oil vapour in carbon dioxide was found to be 2ppb.     

Bioluminescent reporter bacteria detect contaminants in soil samples

Applied Biochemistry and Biotechnology - Reporter strains of bacteria were tested using soil samples from several sites near a leaking fuel oil storage facility. The reporter bacteria utilized the...     

High-resolution NMR spectroscopy of membrane proteins in aligned bicelles

High-resolution solid-state NMR spectra can be obtained from uniformly (15)N-labeled membrane proteins in magnetically aligned bicelles. Fast uniaxial diffusion about the axis of the bilayer normal results in single-line spectra that contain the orientational information necessary for protein structure determination.     

The design of an on-line semi-preparative LC-SPE-NMR system for trace analysis

This paper reports the design of an on-line semi-preparative LC-SPE-NMR system and its use in the structural analysis of mixture components at the 0.02-1% level. The combination provides at least a five fold mass sensitivity increase over that obtained from typical analytical LC-SPE systems and a >30-fold total NMR sensitivity enhancement over analysis by LC-NMR. This is accomplished by using a novel on-line device to store, dilute (1-100-fold) and deliver (at an optimized flow-rate) the isolated component of interest to an SPE trap unit. The SPE unit consists of two cartridges connected in parallel to increase the overall SPE capacity and also to decrease the flow-rate through each trap for enhanced trapping efficiency. As the coupling of semi-preparative LC with NMR (through SPE) is well matched in terms of optimal mass loading for both techniques, only one LC-SPE cycle is required to enrich a 50 microg ml(-1) component (1% in a 5 mg ml(-1) mixture) for the acquisition of heteronuclear (1)H-(13)C NMR data using a conventional NMR flow probe. Furthermore, analytes at the 0.02% level (approximately 1 microg ml(-1)) can be studied using 2D (1)H NMR techniques if peak cuts from replicate sample injections (> or =3) are accumulated into the storage/dilution unit and the resulting solution processed by just one SPE trap and elute cycle.     

Chromatography-free product separation in the Mitsunobu reaction

Mitsunobu products can be isolated pure without column chromatography by first washing a solution of the crude reaction mixture in dichloromethane with 15% aqueous hydrogen peroxide followed by aqueous sodium sulfite. A final filtration through silica gel secures the pure Mitsunobu product.     

Unified gas and supercritical fluid chromatography on 50 μm i.d. Columns

A unified approach to sequential gas and supercritical fluid Chromatography using 50 μm i.d. open tubular columns is described. Sample introduction is performed by means of a rotary injection valve. In order that linear velocities can be optimized independently, a second rotary valve in the chromatographic oven is used to direct the flow of column eluate to the flame ionization detector through either fused silica tubing in GC, or a frit restrictor in SFC. Applications of sequential GC-SFC on a 50 μm i.d. open tubular column are demonstrated, and comparisons made between sequential GC-SFC on 50 and 100 μm i.d. columns.     

The analysis of lubricating oil additives by supercritical fluid chromatography with packed and open tubular capillary columns

Lubricating oil additives have been analyzed by supercritical fluid chromatography on open tubular and packed capillary columns. Carbon dioxide and modified carbon dioxide were used as mobile phases and detection was accomplished by flame ionization and micro UV. Rapid and efficient analysis of the lubricating oil additives was demonstrated.     

Hydroxamic acid polymers. II. Design of a polymeric chelating agent for iron

The iron chelating ability of hydroxamic acid polymers was studied as a function of the atomic chain spacing separating neighboring hydroxamic acid units. Two polymers were prepared, one having the hydroxamic acid group separated by 11 atoms and the other by three atoms. The iron binding of these polymers was compared with the model compound desferrioxamine B (DFO) and with a previously prepared polymer having a nine-atom spacing. Mole ratio plots indicated the following order of stability: DFO ≈ 11 atom > 9 atom > 3 atom. These results are in accordance with the picture derived from molecular models which shows that with a spacing of 11 atoms, three neighboring hydroxamic acids can fit the octahedral arrangement of the iron (III) complex without appreciable strain. Some strain is introduced when the spacing becomes only nine atoms, and with three atoms, complex formation between three neighboring groups becomes virtually impossible.