Structural and compositional heterogeneities in liquid aluminosilicate: insight from a grain structure model

Network structure as well as structural and compositional heterogeneities in aluminosilicate (Al₂O₃-2SiO₂) under compression is investigated by analysis and visualization of simulation data. Structural and compositional heterogeneities are clarified through analysis of topology structure and size distribution of TO _x -clusters (T = Si, Al; x = 3, 4, 5, 6) as well as OT _y -clusters (y = 2, 3, 4). The TO _x -cluster can be considered as TO _x -grains. It appears that the structure of aluminosilicate is the mixture of TO _x -grains with a different short-range order structure and this is the origin of structural heterogeneity. Regarding their composition, the OSi _y - and OAl _y -clusters can be considered as silica- and alumina-grains respectively, and the structure of aluminosilicate can thus be considered to be formed from silica- and alumina-grains. This results in compositional heterogeneity. Moreover, the degree of polymerization and polyamorphism as well as dynamic heterogeneity is also discussed in detail.     

Performance analysis of cooperative spatial multiplexing networks with AF/DF relaying and linear receiver over Rayleigh fading channels

Cooperative spatial multiplexing (CSM) system has played an important role in wireless networks by offering a substantial improvement in multiplexing gain compared with its cooperative diversity counterpart. However, there is a limited number of research works that consider the performance of CSM systems. As such, in this paper, we have derived exact performance of CSM with amplify‐and‐forward and decode‐and‐forward relays in terms of outage capacity and ergodic capacity. We have shown that CSM systems yield a unity diversity order regardless of the number of antennas at the destination and the number of relays in the networks, which is the direct result of diversity and multiplexing gain trade‐off. Our analytical expressions are corroborated by Monte‐Carlo simulations. Copyright © 2013 John Wiley & Sons, Ltd.     

Formulation variationnelle pour le calcul de la diffraction d'une onde acoustique par une surface rigide

This work is a continuation of [1]. We give a space-time variational formula to the problem of the scattered acoutic wave by a hard body, using the double layer retarded potential technique. New schemes are constructed from this variationnal formula, for which we prove the stability and errors estimates.     

Utilization and transport of l-arabinose by non-Saccharomyces yeasts

l-Arabinose is one of the sugars found in hemicellulose, a major component of plant cell walls. The ability to convert l-arabinose to ethanol would improve the economics of biomass to ethanol fermentations. One of the limitations for l-arabinose fermentation in the current engineered Saccharomyces cerevisiae strains is poor transport of the sugar. To better understand l-arabinose transport and use in yeasts and to identify a source for efficient l-arabinose transporters, 165 non-Saccharomyces yeast strains were studied. These yeast strains were arranged into six groups based on the minimum time required to utilize 20 g/L of l-arabinose. Initial transport rates of l-arabinose were determined for several species and a more comprehensive transport study was done in four selected species. Detailed transport kinetics in Arxula adeninivorans suggested both low and high affinity components while Debaryomyces hansenii var. fabryii, Kluyveromyces marxianus and Pichia guilliermondii possessed a single component, high affinity active transport systems.     

Dry Reforming of Methane on a Highly‐Active Ni‐CeO2 Catalyst: Effects of Metal‐Support Interactions on C−H Bond Breaking

Ni‐CeO₂ is a highly efficient, stable and non‐expensive catalyst for methane dry reforming at relative low temperatures (700 K). The active phase of the catalyst consists of small nanoparticles of nickel dispersed on partially reduced ceria. Experiments of ambient pressure XPS indicate that methane dissociates on Ni/CeO₂ at temperatures as low as 300 K, generating CH_x and CO_x species on the surface of the catalyst. Strong metal–support interactions activate Ni for the dissociation of methane. The results of density‐functional calculations show a drop in the effective barrier for methane activation from 0.9 eV on Ni(111) to only 0.15 eV on Ni/CeO_2?x(111). At 700 K, under methane dry reforming conditions, no signals for adsorbed CH_x or C species are detected in the C 1s XPS region. The reforming of methane proceeds in a clean and efficient way.     

Reactions of a,ß‐unsaturated N‐benzenesulfonyl Imine – N‐[(2E)‐3‐phenyl‐2‐propen‐1‐ylidene]benzenesulfonamide with Methyllithium

α,β‐Unsaturated N‐benzenesulfonyl imine 1 was treated with 1.1 eq methyllithium to afford 1,2‐addition adduct as a sole product. However, when compound 1 was treated with 2 eq MeLi, 1,2‐addition product, benzenesulfonamide derivative 3 and 2H‐1,2‐benzothiazine 1,1‐dioxide derivatives 4 and 5 were isolated.     

Infrared spectroscopy of goethite dehydroxylation: III. FT-IR microscopy of in situ study of the thermal transformation of goethite to hematite

Fourier transform infrared microscopy has been used to investigate in situ dehydroxylation of goethite to form hematite. The characterisation was based on the behaviour of hydroxyl units, which were observed in the hydroxyl stretching and hydroxyl deformation and water bending regions, and the Fe-O vibrations of the newly formed hematite during the thermal dehydroxylation process. Two hydroxyl stretching modes (v1 and v2), and three bending (V(bending-1, 2, 3)) and two deformation (V(deformation-1, 2)) modes were observed for goethite. The characteristic vibration at 916 cm(-1) was observed together with the residuals of the v1 and v2 bands in hematite spectrum. The structural transformation between goethite and hematite through thermal dehydroxylation was interpreted in order to provide criteria that can be used for the characterisation of thermally activated bauxite and their conversion to activated alumina phases.     

Calorimetric, spectroscopic, and model studies provide insight into the transport of Ti(IV) by human serum transferrin

Evidence suggests that transferrin can bind Ti(IV) in an unhydrolyzed form (without bound hydroxide or oxide) or in a hydrolyzed form. Ti(IV) coordination by N,N'-di(o-hydroxybenzyl)ethylenediamine-N,N'-diacetic acid (HBED) at different pH values models the two forms of Ti(IV)-loaded transferrin spectrally and structurally. 13C NMR and stopped-flow kinetic experiments reveal that when the metal is delivered to the protein using an unhydrolyzed source, Ti(IV) can coordinate in the typical distorted octahedral environment with a bound synergistic anion. The crystal structure of TiHBED obtained at low pH models this type of coordination. The solution structure of the complex compares favorably with the solid state from pH 3.0 to 4.0, and the complex can be reduced with E1/2 = -641 mV vs NHE. Kinetic and thermodynamic competition studies at pH 3.0 reveal that Ti(citrate)3 reacts with HBED via a dissociative mechanism and that the stability of TiHBED (log beta = 34.024) is weaker than that of the Fe(III) complex. pH stability studies show that Ti(IV) hydrolyzes ligand waters at higher pH but still remains bound to HBED until pH 9.5. Similarly, at a pH greater than 8.0 the synergistic anion that binds Ti(IV) in transferrin is readily displaced by irreversible metal hydrolysis although the metal remains bound to the protein until pH 9.5. Thermal denaturation studies conducted optically and by differential scanning calorimetry reveal that Ti(IV)-bound transferrin experiences only minimal enhanced thermal stability unlike when Fe(III) is bound. The C- and N-lobe transition Tm values shift to a few degrees higher. The stability, competition, and redox studies performed provide insight into the possible mechanism of Ti2-Tf transport in cells.     

Impurity profiling of acetylspiramycin by liquid chromatography–ion trap mass spectrometry

Investigation of acetylspiramycin (ASPM) and its related substances was carried out using a reversed-phase liquid chromatography/tandem mass spectrometry method. The identification of impurities in the ASPM complex was performed with a quadrupole ion trap mass spectrometer, with an electrospray ionization (ESI) source in the positive ion mode which provides MSⁿ capability. A total of 83 compounds were characterized in commercial samples, among which 31 impurities that had never been reported and 31 partially characterized impurities were deduced using the collision-induced dissociation (CID) spectra of major ASPM components as templates. Most of the major impurities arise from the starting materials and the synthesis process. This work provides very useful information for quality control of ASPM and evaluation of its synthesis process.