Ammonia-treatment assisted fully encapsulation of Fe2O3 nanoparticles in mesoporous carbons as stable anodes for lithium ion batteries

To improve the initial coulombic efficiency and bulk density of ordered mesoporous carbons, active Fe2O3 nanoparticles were introduced into tubular mesopore channels of CMK-5 carbon, which possesses high specific surface area (>1700 m 2 g-1 ) and large pore volume (>1.8 cm 3 g-1 ). Fine Fe2O3 nanoparticles with sizes in the range of 5 7 nm were highly and homogenously encapsulated into CMK-5 matrix through ammonia-treatment and subsequent pyrolysis method. The Fe2O3 loading was carefully tailored and designed to warrant a high Fe2O3 content and adequate buffer space for improving the electrochemical performance. In particular, such Fe2O3 and mesoporous carbon composite with 47 wt% loading exhibits a considerably stable cycle performance (683 mAh g-1 after 100 cycles, 99% capacity retention against that of the second cycle) as well as good rate capability. The fabrication strategy can effectively solve the drawback of single material, and achieve a high-performance lithium electrode material.     

Studies on the Cationic Copolymerization of α-Pinene and Styrene with Complex SbCl3/AlCl3 Catalyst Systems. I. Effects of the Polymerization Conditions on the Copolymerization Products

Abstract

The copolymerization products of α-pinene and styrene were prepared with the compound catalyst system SbCl₃/AlCl₃ by changing the Sb/Al ratio, feeding monomer ratio, solvent, and polymerization temperature. The compositions of the copolymerization products were quantitatively characterized by the method of the combination of micro-ozonization and thin-layer chromatography in terms of the contents of the homopolymers and the copolymers containing high or low mole fractions of α-pinene, the yields of pure copolymer, and the monomer unit ratios (F ₁) of copolymers. The results show that it was easier to obtain the higher yield (up to 80%) of the pure copolymer with the complex catalyst system than with AlCl₃ alone. The F ₁ values could be controlled between 30 and 56% under the following polymerization conditions: Sb/Al  1/2, α-pinene/styrene  70%, and the conversion of styrene  90%.     

Computational studies on 3,5,7,10,12,14,15,16-octanitro-3,5,7,10,12,14,15,16-octaaza-pentacyclo[7.5.1.12,8.04,13.06,11]hexadecane as potential high-energy-density compound

The B3LYP/6-31G(d) method of density functional theory was used to study molecular geometry, electronic structure, infrared spectrum, and thermodynamic properties. Detonation properties were evaluated using Kamlet–Jacobs equations based on the calculated density and heat of formation. Thermal stability of 3,5,7,10,12,14,15,16-octanitro-3,5,7,10,12,14,15,16-octaaza-pentacyclo[7.5.1.1^2,8.0^4,13.0^6,11]hexadecane (cage-HMX) was investigated by calculating the bond dissociation energy at unrestricted B3LYP/6-31G(d) level. The calculated results show that the first step of pyrolysis is the rupture of the N–NO₂ bond. The crystal structure obtained by molecular mechanics belongs to P2₁ space group, with lattice parameters a = 8.866 Å, b = 11.527 Å, c = 13.011 Å, Z = 4, and ρ = 2.219 g cm^?3. Both the detonation velocity of 9.79 km s^?1 and the detonation pressure of 45.45 GPa are better than those of CL-20. According to the quantitative standard of energetics and stability as a high-energy-density compound, cage-HMX essentially satisfies this requirement. These results provide basic information for molecular design of novel HEDCs.     

Efficient Oxidation of Sulfides Catalyzed by Transition Metal Salts with Molecular Oxygen in the Presence of Aldehydes

Oxidation of sulfides to sulfoxides and sulfones was achieved in moderate to high yields with a good selectivity, by using Fe₂O₃, MnO₂, Cu(OH)₂ and Cu(OAc)₂ as catalyst, with molecular oxygen in the presence of isovaleraldehyde under mild conditions.