Microstructure of Nickel Aluminides Formed in Situ in Aluminium Matrix Composites

Nickel aluminides formed in situ in aluminium matrix composites due to the interaction between nickel powder and the matrix were examined. The composite materials were obtained from mixtures of nickel powder and aluminium powder by hot pressing in vacuum in the temperature range of 500–640°C. Depending on hot pressing parameters, the morphology of nickel aluminide particles was layered or homogenous, and their size for the same precursor powder was growing as the pressing temperature increased. XRD, SEM, TEM and EDS characterization methods were used for the microstructure investigation.     

The thiazolium-catalyzed Sila-Stetter reaction: conjugate addition of acylsilanes to unsaturated esters and ketones

A new acyl anion addition reaction between acylsilanes and alpha,beta-unsaturated conjugate acceptors promoted by a nucleophilic organic catalyst has been disclosed. The 1,4-dicarbonyl products produced in this reaction are highly useful synthons. Neutral carbenes (or zwitterions) generated in situ from commercial thiazolium salts are used as effective catalysts for the reaction which is in contrast to established anionic catalysts typically employed to promote the required Brook rearrangement (1,2-silyl shift from carbon to oxygen) involved in the reported reaction. This process successfully utilizes acylsilanes as tunable acyl anion progenitors and is tolerant of a wide range of structural diversity on the acylsilane or the conjugate acceptor.     

CHANGES IN TRANSMISSION CHARACTERISTICS OF POLYMETHYLMETHACRYLATE AND CELLULOSE (III) ACETATE DURING EXPOSURE TO ULTRAVIOLET LIGHT

Abstract— Ultraviolet-transparent polymethylmethacrylate (PMMA) and cellulose (III) acetate (CA) (often used as a cut-off filter in UVB [280–320 nm] biological effect studies) were exposed to a 20 W Philips TL 12 lamp to examine changes in transmission characteristics due to UVB exposure. Transmission of UVB and biologically weighted UVB (UV_BE(DNA)) through PMMA were similar, 88.3 and 83.5%, respectively. The absorption characteristics of PMMA did not change with time at any of the UV irradiance levels applied. However, transmission of UVB and UVB_BE(DNA)) through new CA differed considerably: 59% versus only 11%, respectively. Also, spectral absorption characteristics changed with time due to degradation of CA, at a rate that was dependent on the incident UVB irradiance. The decrease in transmission through CA of both UVB and UV_BE(DNA) can be described by exponential functions. The CA that was wrapped around the UV lamp showed dramatic changes in UV absorption over the first few hours of use. However, when CA was placed at a longer distance from the light source initial degradation was less. It is concluded that PMMA can be applied in UV effect studies as a reasonable alternative for quartz. The CA should, however, be used with care, because the large transmission decreases that were observed strongly hamper an accurate calculation of (biologically weighted) UVB dose rates.     

Improved Procedure for the Synthesis of DAMGO

A short and straightforward synthesis of DAMGO is described.     

Selective Demethylations in 2, 3, 4-Trimethoxyaryl Carbonyl Compounds

2, 3, 4-Trimethoxybenzaldehyde, -acetophenone and -benzoic acid give the corresponding 2, 3-dihydroxy-4-methoxy compounds in good yield on treatment with BCl₃.     

An improved SPE method for fractionation and identification of phospholipids

This work reports an efficient and universal SPE method developed for separation and identification of phospholipids derived from complex biological samples. For the separation step, sequential combination of silica gel‐aminopropyl‐silica gel SPE cartridges is applied. This setup enables separation of phosphatidylcholine, lysophosphatidylcholine, phosphatidylethanolamine, phosphatidylglycerol, phosphatidic acid, phosphatidylinositol, phosphatidylserine, cardiolipin, and sphingomyelin into four fractions according to the polarity of their headgroups. Sample acquisition of the SPE fractions is performed by a high‐resolution LC‐MS system consisting of a hybrid linear IT Fourier transform ion cyclotron resonance mass spectrometer coupled to RP‐HPLC. The unequivocal advantage of our SPE sample preparation setup is avoidance of analyte peak overlapping in the determination step done by RP‐HPLC. Overlapping phospholipid signals would otherwise exert adverse ion suppression effects. An additional benefit of this method is the elimination of polar and nonpolar (e.g. neutral lipids) contaminants from the phospholipid fractions, which highly reduces contamination of the LC‐MS system. The method was validated with fermentation samples of organic waste, where 78 distinct phospholipid and sphingomyelin species belonging to six lipid classes were successfully identified.     

Synthesis of 1,4,5-trisubstituted-1,2,3-triazoles via coupling reaction of diaminomaleonitrile with aromatic diazonium salts

A mild procedure for the preparation of 2-(5-amino-1-aryl-1H-1,2,3-triazol-4-yl)-2-iminoacetonitriles and 2-(5-amino-1-aryl-1H-1,2,3-triazol-4-yl)-2-oxoacetonitriles was achieved by the reaction of diaminomaleonitrile and phenyl/substituted phenyl diazonium chlorides. 4-Nitrophenyl diazonium chloride afforded 2-amino-3-(3-(4-nitrophenyl)triaz-1-en-1-yl)maleonitrile. Triazole iminoacetonitrile and maleonitrile derivatives were reacted further with excess acetone and benzaldehyde with a catalytic amount of 1,8-diazabicyclo[5.4.0]undec-7-ene to yield 5-(5-imino-2,2-dimethyl-2,5-dihydrooxazol-4-yl)-3-aryl-3H-1,2,3-triazol-4-amine and (E)-N-benzylidene-5-(5-imino-2-aryl-2,5-dihydrooxazol-4-yl)-3-aryl-3H-1,2,3-triazol-4-amine, respectively. Two competitive reactions, i.e., nucleophilic substitution and nucleophilic addition, were observed when triazole oxoacetonitrile and maleonitrile derivatives were reacted with hydroxylamine hydrochloride in the presence of sodium acetate.     

Heteropoly Acids as Heterogeneous and Reusable Catalyst for α-Thiocyanation of Ketones

Simple, efficient, and mild method for α-thiocyanation of ketones in presence of heteropolyacid has been developed. This methodology offered α-oxothiocyanates in good to excellent yields at room temperature in a highly selective manner. The catalyst could be efficiently recovered from the reaction and reused.     

Electrochemical production, characterization, and application of MWCNTs

The subject of this study is production of carbon nanotubes (CNTs) using an original procedure of reduction of lithium molten salts onto graphite cathode; their structural characterization and application as support material for electrocatalysts aimed for hydrogen evolution. As-produced CNTs were characterized by means of scanning and transmission electron microscopy (SEM and TEM), Raman spectroscopy, and thermogravimetric and differential thermal analysis (DTA). SEM and TEM images have shown that nanotubes are mostly of curved shape with length of 1–20 μm and diameter of 20–40 nm. Raman peaks indicate that the crystallinity of produced nanotubes is rather low. The obtained results suggest that formed product contains up to 80 % multiwalled carbon nanotubes (MWCNTs), while the rest being non-reacted graphite and fullerenes. DTA curves show that combustion process of the nanotubes takes place in two stages, i.e., at 450 and 720 °C. At the lower temperature, combustion of MWCNTs occurs, while at higher one, fullerenes and non-reacted graphite particles burn. As-produced MWCNTs were used as electrocatalyst’s support materials and their performance was compared with that of traditional carbon support material Vulcan XC-72. MWNTs have shown almost twice higher real surface area, and electrocatalyst deposited on them showed better catalytic activity than corresponding one deposited on Vulcan XC-72.