Femtosecond solvation dynamics in different regions of a bile salt aggregate: excitation wavelength dependence

Solvation dynamics of coumarin 480 (C480) in the secondary aggregate of a bile salt (sodium deoxycholate, NaDC) is studied using femtosecond up-conversion. The secondary aggregate resembles a long (approximately 40 A) hollow cylinder with a central water-filled tunnel. Different regions of the aggregate are probed by variation of the excitation wavelength (lambdaex) from 375 to 435 nm. The emission maximum of C480 displays an 8 nm red shift as the lambdaex increases from 345 to 435 nm. The 8 nm red edge excitation shift (REES) suggests that the probe (C480) is distributed over regions of varied polarity. Excitation at a short wavelength (375 nm) preferentially selects the probe molecule in the buried locations and exhibits slow dynamics with a major (84%) slow component (3500 ps) and a small (16%) contribution of the ultrafast component (2.5 ps). Excitation at lambdaex=435 nm (red end) corresponds to the exposed sites where solvation dynamics is very fast with a major (73%) ultrafast component (相似文献   

Review of the aldol reaction

Aldol condensation is an important synthetic method widely used in organic synthesis. Development of catalytic methods that avoids the production of stoichiometric by-products while maintaining high levels of control available from stoichiometric processes provides an atom-economical alternative for these important transformations. Indeed, numerous catalysts for the aldol reaction have been reported in recent years, including enzymes, catalytic antibodies, organometals, organocatalysts, and small molecules. The direct aldol reaction is the most important reaction employed by synthetic chemists and is common in nature. Recently, various Lewis acids have been examined as catalysts for aldol reactions, but aldol condensation in a micellar medium has not been studied in detail so far. Because of stronger environmental concerns, organic reactions in green media, especially in water, have attracted more attention. It is believed that micelles act as nano reactors to enhance the reaction rates and give very good to excellent yields of end products.     

Combined effect of promoter and surfactant on the chromium(VI) oxidation of D-ribose in aqueous media at room temperature

Effect of polypyridine derivatives on chromium(VI) oxidation of D-ribose in aqueous media was studied spectrophotometrically. The oxidized product D-erythrose was detected by paper chromatography. The promoters 1,10-phenanthroline, 2,2?-bipyridine, 2-picolinic acid, and 2,3-dipicolinic acid accelerated the oxidation, whereas isomeric 4,7-phenanthroline, 4,4?-bipyridine, 4-picolinic acid, and 2,6-dipicolinic acid did not influence the oxidation. Formation of Cr(VI)-promoter complex was identified through fluorescence spectroscopy. Rate constants depended on promoter concentration. SDS and TX-100 enhanced the D-ribose oxidation, while CPC retarded the reaction. Location of D-ribose inside micelles was observed through ¹H NMR. DLS study showed that the relative size of SDS and TX-100 micelles expanded in presence of chromium(VI).     

Mapping the efficacy of new designs for large scale sonochemical reactors

Sonochemical reactors have a great promise for many physical and chemical processing applications but its applicability at pilot or industrial scale levels is hindered by lack of novel designs which can reproduce the spectacular effects generated at the laboratory scale. The present work evaluates the efficacy of two new designs, operating at a liquid capacity of 7l. Mapping of the cavitational activity has been carried out using measurements of local pressure using hydrophone and cativational intensity using Cavitation Activity Indicator (Model IC-3, N. Deznukov, Belarus State University, Minsk, Belarus). Aim has been to identify the distribution of the cavitational activity in radial and axial directions and possibly characterizing the zones with very high and very low cavitational activity in these reactor configurations. It has been observed that the cavitational activity is substantially uniform in both the reactors unlike the conventional single transducer based reactors. The study clearly indicates the feasibility of these designs for future large scale applications.     

Photoinduced electron transfer reaction in room temperature ionic liquids: a combined laser flash photolysis and fluorescence study

A detailed study of the photoinduced electron transfer (PET) reaction between pyrene and N,N-dimethylaniline has been made in four different room temperature ionic liquids (ILs) using steady state and time-resolved fluorescence and laser flash photolysis techniques. Unlike that in the conventional media, no exciplex emission for this well-known system could be observed in ILs. The rate constants for the PET induced quenching of the fluorescent state of pyrene, which lie between 6.9 and 37 x 107 M-1 s-1 depending on the viscosity, are found to be 2-4 times higher than the diffusion-controlled rates in ILs. The primary photoproducts of the PET process have been characterized by transient absorption spectroscopy, and the yields of the solvent-separated PET products have been determined. Even in the least viscous IL, [emim][Tf2N], the yield of the solvent-separated radical ion is estimated to be only 0.015 +/- 0.005. In more viscous ILs such as [bmim][PF6], the yield is found to be so low that absorption due to these species could not be observed. The rate constant for the escape of the ionic products from the geminate ion pair in ILs has been estimated to be nearly 2-3 orders of magnitude lower than the back electron transfer rate. However, the small fraction of the PET products, which manage to escape geminate recombination, have been found to survive much longer compared to those in less viscous conventional solvents.     

A Nonheme Sulfur‐Ligated {FeNO}6 Complex and Comparison with Redox‐Interconvertible {FeNO}7 and {FeNO}8 Analogues

A nonheme {FeNO}⁶ complex, [Fe(NO)(N3PyS)]²⁺, was synthesized by reversible, one‐electron oxidation of an {FeNO}⁷ analogue. This complex completes the first known series of sulfur‐ligated {FeNO}^6–8 complexes. All three {FeNO}^6–8 complexes are readily interconverted by one‐electron oxidation/reduction. A comparison of spectroscopic data (UV/Vis, NMR, IR, Mössbauer, X‐ray absorption) provides a complete picture of the electronic and structural changes that occur upon {FeNO}⁶–{FeNO}⁸ interconversion. Dissociation of NO from the new {FeNO}⁶ complex is shown to be controlled by solvent, temperature, and photolysis, which is rare for a sulfur‐ligated {FeNO}⁶ species.     

Protection of aspergillus niger cellulases by urea during growth on glucose or glycerol supplemented media

The cellulase enzymes ofAspergillus niger were found to undergo catabolite repression in the presence of glucose and glycerol accompanied by sudden drop in pH of the fermentation medium below 2.0. This sudden drop in pH caused inactivation of cellulolytic enzymes produced byAspergillus niger. The supplementation of nitrogen sources, especially urea, protectsA. niger cellulases from inactivation caused by a sudden drop in pH, since urea helped to maintain the pH of the fermentation medium between 3.5 and 4.5. The role of urea in the protection of cellulase was more prominent when it was used in combination with glycerol (5%).     

Excitation wavelength dependence of solvation dynamics in a supramolecular assembly: PEO-PPO-PEO triblock copolymer and SDS

The triblock copolymer (PEO)20-(PPO)70-(PEO)20 (P123) forms a supramolecular aggregate with sodium dodecyl sulfate (SDS). The solvation dynamics and anisotropy decay of coumarin 480 (C480) in different regions of a P123-SDS aggregate are studied through variation of the excitation wavelength (lambdaex) using femtosecond upconversion. In a P123 micelle, because of the drastic differences in polarity between the hydrophilic corona region (PEO block) and the hydrophobic PPO core, C480 exhibits a pronounced red edge excitation shift (REES) of emission maximum by 24 nm. In the P123-SDS aggregate, SDS penetrates the core of the P123 micelle. This increases the polarity of the core and reduces the difference in the polarity between the core and the corona region. In a P123-SDS aggregate, the REES is much smaller (5 nm) which suggests a reduced difference between the core and the corona. Solvation dynamics in a P123 micelle displays a bulklike ultrafast component (<0.3 and 1 ps) in the PEO corona region, a 200 ps component arising from dynamics of polymer segments, and a very long component (5000 or 3000 ps) due to the highly restricted PPO core. In a P123-SDS aggregate, at lambdaex = 375 and 405 nm, the solvation dynamics is found to be faster than that in P123 micelle. In this case, the component (3000 ps) arising from the core region is faster than that (5000 ps) in P123 micelle. In both P123 micelle and P123-SDS aggregate, the relative contribution of the core region decreases and that of the corona region increases with an increase in lambdaex. At lambdaex = 435 nm, which probes the hydrophilic corona, the solvation dynamics for both P123 micelle and P123-SDS aggregate are almost similar.     

Reduction of absorption loss in asymmetric twin waveguide laser tapers using argon plasma-enhanced quantum-well intermixing

Lasers based on asymmetric twin waveguide integration technology are limited by the necessity of pumping the tapers to avoid absorption losses within this section of the active region. Here, we demonstrate that the threshold current is reduced by argon plasma-enhanced quantum-well intermixing in the taper. Intermixing induces a (57/spl plusmn/5) nm wavelength blue shift in the emission peak, accompanied by a <12-nm linewidth broadening of the photoluminescence spectrum, indicating minimal material degradation. The threshold current of a 0.6-mm-long laser is reduced by (18/spl plusmn/1)% to (27/spl plusmn/1) mA using an intermixed taper as compared to a nonintermixed structure.     

Room temperature synthesis of crystalline CeO2 nanopowder: advantage of sonochemical method over conventional method

In the present study, nano-sized ceria (CeO(2)) powders were prepared using conventional and sonochemically assisted precipitation method, without any stabilizers, using cerium nitrate as a starting material and sodium hydroxide as a precipitating agent. The synthesized ceria powders were characterized by XRD, TGA and SEM to determine crystallite size, % crystallinity, thermal weight loss and shape respectively. It was found that the crystallite size obtained in both the synthesis methods were below 30 nm. It was also found that sonochemical synthesis method is energy efficient method saving more than 92% of energy as compared to that utilized by the conventional synthesis method. There was also a significant reduction in the reaction duration.