COIL中BHP浓度对发生O_2(~1△)的影响

本文实验研究了BHP的浓度对产生O2（1△）的影响。实验结果表明：当BHP浓度大于3.5M时，Cl2利用率以及O2（1△）的产率将不依赖于BHP浓度的变化而变化，同时，实验结果表明，使用低浓度的BHP对COIL的操作是可行的。     

A technique for extracting physiological parameters and therequired input function simultaneously from PET image measurements:theory and simulation study

Positron emission tomography (PET) is an important tool for enabling quantification of human brain function. However, quantitative studies using tracer kinetic modeling require the measurement of the tracer time-activity curve in plasma (PTAC) as the model input function. It is widely believed that the insertion of arterial lines and the subsequent collection and processing of the biomedical signal sampled from the arterial blood are not compatible with the practice of clinical PET, as it is invasive and exposes personnel to the risks associated with the handling of patient blood and radiation dose. Therefore, it is of interest to develop practical noninvasive measurement techniques for tracer kinetic modeling with PET. In this paper, a technique is proposed to extract the input function together with the physiological parameters from the brain dynamic images alone. The identifiability of this method is tested rigorously by using Monte Carlo simulation. The results show that the proposed method is able to quantify all the required parameters by using the information obtained from two or more regions of interest (ROIs) with very different dynamics in the PET dynamic images. There is no significant improvement in parameter estimation for the local cerebral metabolic rate of glucose (LCMRGlc) if there are more than three ROIs. The proposed method can provide very reliable estimation of LCMRGlc, which is our primary interest in this study     

Cr^4＋：YAG,Cr^4＋：Mg2SiO4近红外荧光辐射温度特性研究

测量了Ｃｒ＾４＋，ＹＡＧ、Ｃｒ＾４＋，Ｍｇ２ＳｉＯ４晶体在室温和液氮温度下的荧光光谱，吸收光谱和激发态寿命，讨论了温度变化时，两种晶体中Ｃｒ＾４＋近红外辐射积分强度变化与激光发态寿命变化的关系，得出结论：在７７Ｋ￣３００Ｋ范围内，Ｃｒ＾４＋的＾３Ｔ２能级荧光辐射截面本身受温度影响不大，Ｃｒ＾４＋辐射荧光的变化，主要是由无辐射弛豫速率随温度变化而引起的。     

用BBO晶体产生196～228nm波长的紫外辐射

本文报道了用BBO晶体通过混频产生196～228nm可调谐紫外辐射的研究结果.产生200nm及222nm的量子转换效率分别为12%及23%,与理论计算值基本相符.     

High-power 980-nm AlGaAs/InGaAs strained quantum-well laser grown by OMVPE

High-power lattice-strained AlGaAs/InGaAs graded index separate-confinement heterostructure (GRINSCH) quantum-well lasers emitting at a 980-nm wavelength have been grown by organometallic vapor phase epitaxy (OMVPE) and fabricated with a self-aligned ridge-waveguide structure. Using a 3- mu m-wide and 750- mu m-long AR-HR coated laser, 30 mV of optical power was coupled into optical fibers with 28.6% efficiency. A dominating single-lobe far-field radiation pattern was obtained from a wedge-shaped ridge-waveguide laser for output power as high as 240 mW with a maximum output power of 310 mW.<>     

Hypersurface with Constant Main Curvature Symmetric Functions

ＨｙｐｅｒｓｕｒｆａｃｅｗｉｔｈＣｏｎｓｔａｎｔＭａｉｎＣｕｒｖａｔｕｒｅＳｙｍｍｅｔｒｉｃＦｕｎｃｔｉｏｎｓ￥ＷｕＢａｏｑｉａｎｇ；ＳｏｎｇＨｏｎｇｚａｏ（ＸｕｚｈｏｕＴｅａｃｈｅｒｓＣｏｌｌｅｇｅ，２２１００９）（ＨｅｎａｎＵｎｉｖｅｒｓｉｔｙ，...     

Improved decoder for transform coding with application to the JPEGbaseline system

Transform coding, a simple yet efficient image coding technique, has been adopted by the Joint Photographic Experts Group (JPEG) as the basis for an emerging coding standard for compression of still images. However, for any given transform encoder, the conventional inverse transform decoder is suboptimal. Better performance can be obtained by a nonlinear interpolative decoder that performs table lookups to reconstruct the image blocks from the code indexes. Each received code index of an image block addresses a particular codebook to fetch a component vector. The image block can be reconstructed as the sum of the component vectors for that block. An iterative algorithm for designing a set of locally optimal codebooks is developed. Computer simulation results demonstrate that this improved decoding technique can be applied in the JPEG baseline system to decode enhanced quality pictures from the bit stream generated by the standard encoding scheme     

Poly(phenylene vinylene)‐based copolymers containing 3,7‐phenothiazylene and 2,6‐pyridylene chromophores: Fluorescence sensors for acids,metal ions,and oxidation

A novel copolymer, poly(N‐hexyl‐3,7‐phenothiazylene‐1,2‐ethenylene‐2,6‐pyridylene‐1,2‐ethenylene) ( P3 ), containing N‐hexyl‐3,7‐phenothiazylene and 2,6‐pyridylene chromophores was synthesized to investigate the effect of protonation, metal complexation, and chemical oxidation on its absorption and photoluminescence (PL). Poly(N‐hexyl‐3,8‐iminodibenzyl‐1,2‐ethenylene‐1,3‐phenylene‐1,2‐ethenylene) and poly(N‐hexyl‐3,7‐phenothiazylene‐1,2‐ethenylene‐1,3‐phenylene‐1,2‐ethenylene) ( P2 ), consisting of 1,3‐divinylbenzene alternated with N‐hexyl‐3,8‐iminodibenzyl and N‐hexyl‐3,7‐phenothiazylene, respectively, were also prepared for comparison. Electrochemical investigations revealed that P3 exhibited lower band gaps (2.34 eV) due to alternating donor and acceptor conjugated units (push–pull structure). The absorption and PL spectral variations of P3 were easily manipulated by protonation, metal chelation, and chemical oxidation. P3 displayed significant bathochromic shifts when protonated with trifluoroacetic acid in chloroform. The complexation of P3 with Fe³⁺ led to a significant absorption change and fluorescence quenching, and this implied the coordination of ferric ions with the 2,6‐pyridylene groups in the backbone. Moreover, both phenothiazylene‐containing P2 and P3 showed conspicuous PL quenching with a slight redshift when oxidized with NOBF₄. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1272–1284, 2004     

Solvothermal Synthesis of Molybdenum Disulfide Hollow Spheres Modified by Cyanex 301 in Water–Ethanol Medium

Hollow spherical molybdenum disulfide has been successfully synthesized via a solvothermal method using Cyanex 301 as sulfur source and modification agent. The hollow spheres are characterized by transmission electron microscopy, scanning electron microscopy, X-ray diffraction and Energy-Dispersive X-ray analysis. The influences of reaction conditions are also discussed while a mechanism is proposed to explain the formation of the peculiar morphology.