Metal complexes with macrocyclic ligands. Part XXII. Synthesis two of bis-tetraaza-macrocycles and study of the structures,electrochemistry, VIS and EPR spectra of their binuclear Cu2+ and Ni2+ complexes

The two bis-macrocycles 4 and 5 in which the tetraaza units are separated by a chain of different length, have been synthesized using 1,4,7-tritosyl-1,4,7,11-tetraazacyclotetradecane as starting compound and bifunctional alkylating agents. The bis-macrocycles give binuclear complexes with Ni²⁺ and Cu²⁺, the properties of which have been studied to obtain information about the interaction of the two subunits as a function of the distance. The VIS spectra of the Ni²⁺ and Cu²⁺ complexes indicate that both metal ions are in a square-planar geometry as expected from the results of the analogous complexes with 1,4,7,11-tetraazacyclotetradecane 7 . Cyclic voltammetry and differential pulse polarography of the binuclear Ni²⁺complexes in CH₃CN show a single two-electron step for ligand 5 , whereas two distinct one-electron redox processes can be observed for ligand 4 , indicating that the two metal ions interact with each other when the chain length is shorter. Similarly, the EPR studies of frozen solutions of the binuclear Cu²⁺ complexes clearly show that a magnetic dipolar interaction between the two paramagnetic centers exists, and that the strength of it depends upon the length of the bridge. Finally, from the X-ray structures of the binuclear Ni²⁺ complexes with 4 and 5 , it is seen that the two rings are kept apart as far as possible, the distances between the two metal ions determined in the solid correlate well with the observations in solution.     

Electrospun cellulose acetate fibers: effect of solvent system on morphology and fiber diameter

This paper reports an investigation of the effects of solvent system, solution concentration, and applied electrostatic field strength (EFS) on the morphological appearance and/or size of as-spun cellulose acetate (CA) products. The single-solvent systems were acetone, chloroform, N,N -dimethylformamide (DMF), dichloromethane (DCM), methanol (MeOH), formic acid, and pyridine. The mixed-solvent systems were acetone–DMAc, chloroform–MeOH, and DCM–MeOH. Chloroform, DMF, DCM, MeOH, formic acid, and pyridine were able to dissolve CA, forming clear solutions (at 5% w/v), but electrospinning of these solutions produced mainly discrete beads. In contrast, electrospinning of the solution of CA in acetone produced short and beaded fibers. At the same solution concentration of 5% (w/v) electrospinning of the CA solutions was improved by addition of MeOH to either chloroform or DCM. For all the solvent systems investigated smooth fibers were obtained from 16% (w/v) CA solutions in 1:1, 2:1, and 3:1 (v/v) acetone–DMAc, 14–20% (w/v) CA solutions in 2:1 (v/v) acetone–DMAc, and 8–12% (w/v) CA solutions in 4:1 (v/v) DCM–MeOH. For the as-spun fibers from CA solutions in acetone–DMAc the average diameter ranged between 0.14 and 0.37 μm whereas for the fibers from solutions in DCM–MeOH it ranged between 0.48 and 1.58 μm. After submersion in distilled water for 24 h the as-spun CA fibers swelled appreciably (i.e. from 620 to 1110%) but the physical integrity of the fibrous structure remained intact.     

Studies on metal — protein interactions: Inter-comparison among various approaches

Binding ability of mercury, thallium, lead and bismuth with Erythrina variegata seed protein have been investigated using tracer packet technique. Due to the lack of standard methods, inter-comparisons have been made among three different approaches, like trichloroacetic acid (TCA) precipitation, isoelectric precipitation and dialysis of protein after incubation with the metals. Good agreement was observed for all the cases except that of lead.     

Synthesis of a novel rigid molecule family for the investigation of electron and energy transfer

Three new rigid bridging ligands for metal complexation (7=bmb, 8=bqb and 11=btb) were prepared from a rigid triptycene spacer connected to two bipyridine ligands using a Horner–Emmons type reaction. The triptycene spacer is substituted by methoxy groups in the case of bmb and in the case of bqb by a benzoquinone substituent. The corresponding metal complexes (ruthenium and/or osmium) were synthesised and the different luminescence behaviour was tested. They show great potential for the investigation of intramolecular electron and energy transfer reactions. The dinuclear metal complex Ru---bqb---Os is an interesting system in which the bridging ligand bqb acts as a redox switch, able to tune the conductivity for energy or electrons across the bridge.     

Miniaturization of separation techniques using planar chip technology

Miniaturization of separation columns implies equally reduced vol- umes of injectors, detectors, and the connecting channels. Planar chip technology provides a powerful means for the fabrication of micron-sized structures such as channels. This is demonstrated by two examples. An optical absorbance detector chip exhibits the expected behavior of a 1 mm optical path length cell despite its volume of 1 nL. A capillary electrophoresis device allows integrated injections of 100 pL samples, efficiencies of 70,000 to 160,000 theoretical plates in 10 to 20 seconds, and external laser-induced fluorescence detection at any capillary length of choice between 5 and 50 mm.     

Preparation,Structure, and Reactivity of Thioxo and Imino Derivatives of the Triolide (and Pentolide) from (R)-3-Hydroxybutanoic Acid

Reaction of the triolide 1 from (R)-3-hydroxybutanoic acid with Lawesson's reagent 5 leads to the mono-, di-, and trithio derivatives 6–8 which can be isolated in pure form (20–40% yields), and which have crystal structures very similar to the parent triolide 1 (Fig. 1). Similarly, pentolide 3 is converted to mixtures of various thio derivatives, three of which are separated ( 10–12 ) by HPLC and fully characterized. The X-ray structures of the mono- and of one of the dithiopentolides ( 10, 12 ) differ remarkably from each other (Fig. 3). Reduction of the thiotriolides 6–8 (NaBH₄, R₃SnH, Cl₃SiH, Raney-Ni) gives 12-membered rings containing up to three ether groups (chiral crown ethers, 15, 17–19 ) in poor yields. The thiotriolides react spontaneously and in yields of up to 96% with ammonia, certain primary amines, and hydroxylamine to give imine and oxime derivatives with intact 12-membered-ring backbones ( 20, 22–24, 30 , see crystal structures in Figs. 4–7). The rigid structure of all the derivatives of triolide 1 puts the C?O, C?S, and C?NR O-, S-, and N-atoms in juxtaposition (a feature reminiscent of the side chains in the iron-binder enterobactin, Fig. 6). Imines containing PPh₂ groups are prepared ( 30, 33, 35 ) from the thiotriolides and tested as chiral ligands for Pd^II-catalyzed 1,3-diphenyallylations (→ 37 , enantiomer ratio up to 77:23). The reactions described demonstrate that multiple reactions of the triolide 1 from (R)-3-hydroxybutanoic acid which proceed through tetrahedral intermediates are possible without ring opening – the skeleton is remarkably stable, and this might be exploited as a template for bringing up to three pendent substituents into close proximity to allow a study of their interactions and cooperative properties. Also, the di- and trithio derivatives 7 and 8 could be used for cross-linking in molecules containing primary NH₂ groups.     

The fast multipole boundary element method for molecular electrostatics: An optimal approach for large systems

We propose a fast implementation of the boundary element method for solving the Poisson equation, which approximately determines the electrostatic field around solvated molecules of arbitrary shape. The method presented uses computational resources of order O(N) only, where N is the number of elements representing the dielectric boundary at the molecular surface. The method is based on the Fast Multipole Algorithm by Rokhlin and Greengard, which is used to calculate the Coulombic interaction between surface elements in linear time. We calculate the solvation energies of a sphere, a small polar molecule, and a moderately sized protein. The values obtained by the boundary element method agree well with results from finite difference calculations and show a higher degree of consistency due to the absence of grid dependencies. The boundary element method can be taken to a much higher accuracy than is possible with finite difference methods and can therefore be used to verify their validity. © 1995 by John Wiley & Sons, Inc.     

Formation and dissociation mechanism of amide complexes. V. Interconversion of dimeric and monomeric Cu2+-complexes with 1,8-diamino-3,6-diaza-2,7-octanedione: Comparison between the reactivity of terminal and internal amide groups

The protonation and deprotonation rates of the coordinated amide groups in the Cu²⁺-complexes of 1,8-diamino-3,6-diaza-2,7-octanedione (DED = L) have been studied by stopped-flow techniques. Starting at low pH from Cu²⁺ and DED the dimeric Cu₂L₂⁴⁺-complex, fully formed within the mixing time of the stopped-flow instrument, reacts in two consecutive steps to yield the final product CuLH_?2. The rate constants of the forward and backward reactions have been determined and are given in Table 1. The intermediate was identified as Cu₂L₂H_?2²⁺ by measuring its VIS.-absorption spectrum. The rate constants for the interconversion of the amide groups from the O- to the N-coordinated form in the Cu²⁺-complexes of DED, 2,10-dioxo-1, 4, 8, 11 tetraazaundecane (DANA) and triglycine (TRIGLY) are compared with each other. It is shown that these rate constants are similar, no matter whether the amide group is terminal or internal as long as the rotation is easily possible as is the case in the dimeric species Cu₂L₂⁴⁺ and Cu₂L₂H_?2²⁺. However, for CuLH_?2 the inter-conversion only takes place after opening of one of the chelate rings in a rapid protonation preequilibrium.     

Shear and NMR experiments of materials with flow behaviour depending on the deformation history

Oxide ceramic masses react to simple shearing with hardening (peptisation: increase in the shear stress with the shear deformation). In the present study the correlation between the increase in the shear stress and the porosity, agglomeration processes and the type of flow are analysed. For this purpose oxide ceramic masses are tested in a shear device especially developed for pastes and analysed by rheometric experiments, NMR methods and particle size analysis. The results support the hypothesis that structural changes (hardening, increase in the mean porosity) of the material during the peptisation mainly depend on the magnitude and not on the kind of the energy input and thus of the type of flow. The fraction of bound (more generally, the immobilised) water increases with the shear displacement. Also crushing of primary particles could be observed. Both the crushing of solid particles causing an increased solid surface and the formation of a three-dimensional gel structure are microscopic effects capable of resulting in the binding or retaining water. On a macroscopic scale these phenomena cause hardening. Magnetic resonance imaging visualises flow-induced agglomerates, which form owing to the shear flow and increase the porosity averaged over the whole sample. After the shear experiment rolls of paste can be seen which indicate that the general assumption of a plane shear flow in the shear device is not warrantable. Received: 19 July 2001 Accepted: 25 October 2001     

Substituenteneffekte auf azido-tetrazolo-gleichgewichte elektronische und sterische effekte bei s-triazolo[4,3-c]tetrazolo[1,5-a]pyrimidinen1

The azido tetrazolo valence isomerism of twenty 9-methyl-s-triazolo[4,3-c]tetrazolo[1,5-a]pyrimidines with different substituents at position 5 has been studied by means of ¹H NMR spectroscopy. All the compounds have been found to be tetrazoles in the solid state and in (CD₃)₂SO solution; in CF₃COOH azido and tetrazolo isomers are in equilibrium. From equilibrium constants K and thermodynamic data determined it is concluded that in this series K depends on both electronic effects and steric requirements of the 5-substituents. A linear relation between K and σ was found for 5-arylderivatives because ΔS° keeps approximately constant and the substituent mainly operates on ΔH°.