4H–SiC BJTs with current gain of 110

4H–SiC BJTs with a common emitter current gain of 110 have been demonstrated. The high current gain was attributed to a thin base of 0.25 μm which reduces the carrier recombination in the base region. The device open base breakdown voltage (BV_CEO) of 270 V was much less than the open emitter breakdown voltage (BV_CBO) of 1560 V due to the emitter leakage current multiplication from the high current gain by “transistor action” of BJTs. The device has shown minimal gain degradation after electrical stress at high current density of >200 A/cm²up to 25 h.     

New chemical constituents from the fruits of Zanthoxylum armatum and its in vitro anti-inflammatory profile

Chemical investigations on the fruits of Zanthoxylum armatum Roxb. (Rutaceae) led to the isolation of two new constituents characterised as 2α-methyl-2β-ethylene-3β-isopropyl-cyclohexan-1β, 3α-diol (1) and phenol-O-β-D-arabinopyranosyl-4′-(3″, 7″, 11″, 15″-tetramethyl)-hexadecan-1″-oate (2) along with known compounds m-methoxy palmityloxy benzene (3), acetyl phenyl acetate (4), linoleiyl-O-α-D-xylopyranoside (5), m-hydroxyphenoxy benzene (6) and palmitic acid (7). The chemical structures were established with the help of physical, chemical and spectroscopic methods. The anti-inflammatory potential of isolated compounds 1 and 2 was evaluated using in vitro target-based anti-inflammatory activity in LPS-stimulated primary peritoneal macrophages isolated from mice. Production of pro-inflammatory cytokines (TNF-α and IL-6) was significantly inhibited by the treatment of isolated compounds 1 and 2 in a dose-dependent manner.     

Novel Carbazole‐Based N‐Heterocyclic Carbene Ligands to Access Synthetically Relevant Stilbenes in Pd‐Catalyzed Coupling Processes

A series of new carbazole‐based N‐heterocyclic carbene (NHC) ligands have been synthesized in a simple and facile synthetic route and subsequently used in a Pd/carbazole‐based NHC catalytic system, which was found to be effective in catalyzing Heck reactions to provide substituted stilbene derivatives in good yields. Several bioactive stilbenes, including pterostilbene, pinosylvin, trimethoxy resveratrol, and resveratrol, were synthesized in good yields, and a 10 mmol scale‐up was also performed for trimethoxy resveratrol. The synthetic application was also extended by performing a double‐tandem chemoselective Heck reaction followed by Miyaura borylation in a one‐pot procedure to give single‐step access to synthetically useful stilbenyl boronate esters. Similarly, a unique triple‐tandem protocol of a chemoselective Heck reaction/Miyaura borylation/Suzuki–Miyaura coupling reaction sequence was performed for the one‐pot modification of biologically relevant molecules.     

Pd‐Colloids‐Catalyzed/Ag2O‐Oxidized General and Selective Esterification of Benzylic Alcohols

Palladium colloids obtained from the degradation of Hermann–Beller palladacycle proved to be an efficient catalytic system in combination with silver oxide as a selective oxidant for the oxidative esterification of differently substituted benzyl alcohols in MeOH as solvent. Excellent reactivity exhibited by the catalytic system also allowed the alcoholic coupling partner to be changed from MeOH to a wide range of alcohols having diverse functionalities. The mildness of the developed protocol also made it possible to employ propargyl alcohol as the coupling partner without any observation of any interference of the terminal alkyne. Selective oxidative coupling of a primary alcoholic functional group over secondary in the case of glycols and glycerols was also made possible using the developed catalyst system. To test the relevancy of Pd/Ag combined catalysis mixed Pd/Ag colloids were synthesized, characterized by TEM, XRD and XPS and applied to oxidative‐esterification successfully.     

The underappreciated influence of ancillary halide on metal–ligand proton tautomerism

Syntheses of Vaska-type complexes [IrP₂X(CO)] (P = phosphine, X = halide) with all four common halides (fluoride, chloride, bromide, and iodide) was attempted using a protic and hemilabile imidazolyl di-tert-butyl phosphine ligand. In the solid-state, all four complexes were found to be ionic with the halides in the outer-sphere, and the fourth coordination site of the square plane occupied by the imidazole arm of the ligand. In solution, however, the chloride complex was found to be in equilibrium with an octahedral Ir^III–H species at room temperature. For the bromide and iodide analogs, the corresponding Ir^III–H species were also observed but only after heating the solutions. The neutral Ir^I Vaska''s analogs for X = Cl, Br, and I were obtained upon addition of excess halide salt, albeit heating was required for X = Br and I. The Ir^III–H species are proposed to originate from tautomerization of minor amounts of the electron rich neutral Vaska analog (halide inner-sphere and phosphines monodentate) that are in equilibrium with the ionic species. Heating is required for the larger anions of bromide and iodide to overcome a kinetic barrier associated with their movement to an inner-sphere position prior to tautormerization. For the fluoride analog, the Ir^III–H was not observed, attributable to strong hydrogen bonding interactions of the imidazolyl proton with the fluoride anion.

Ligand protonated Ir^I bisphosphine carbonyl complexes isolated as halide salts equilibrate with their neutral Ir^III–H congeners in solution. The equilibrium constant and energy barrier to interconversion are dependent on the identity of the halide.     

Fatty Acid Analysis,Chemical Constituents,Biological Activity and Pesticide Residues Screening in Jordanian Propolis

Propolis is a resinous natural product collected by honeybees (Apis mellifera and others) from tree exudates that has been widely used in folk medicine. The present study was carried out to investigate the fatty acid composition, chemical constituents, antioxidant, and xanthine oxidase (XO) inhibitory activity of Jordanian propolis, collected from Al-Ghour, Jordan. The hexane extract of Jordanian propolis contained different fatty acids, which are reported for the first time by using GC-FID. The HPLC was carried out to identify important chemical constituents such as fatty acids, polyphenols and α-tocopherol. The antioxidant and xanthine oxidase inhibitory activities were also monitored. The major fatty acid identified were palmitic acid (44.6%), oleic acid (18:1∆⁹cis, 24.6%), arachidic acid (7.4%), stearic acid (5.4%), linoleic acid (18:2∆^9–12cis, 3.1%), caprylic acid (2.9%), lignoceric acid (2.6%), cis-11,14-eicosaldienoic acid (20:2∆^11–14cis, 2.4%), palmitoleic acid (1.5%), cis-11-eicosenoic acid (1.2%), α–linolenic acid (18:3∆^9–12–15cis, 1.1%), cis-13,16-docosadienoic acid (22:2∆^13–16cis, 1.0%), along with other fatty acids. The major chemical constituents identified using gradient HPLC-PDA analysis were pinocembrin (2.82%), chrysin (1.83%), luteolin-7-O-glucoside (1.23%), caffeic acid (1.12%), caffeic acid phenethyl ester (CAPE, 0.79%), apigenin (0.54%), galangin (0.46%), and luteolin (0.30%); while the minor constituents were hesperidin, quercetin, rutin, and vanillic acid. The percentage of α-tocopherol was 2.01 µg/g of the lipid fraction of propolis. Antioxidant properties of the extracts were determined via DPPH radical scavenging. The DPPH radical scavenging activities (IC₅₀) of different extracts ranged from 6.13 to 60.5 µg/mL compared to ascorbic acid (1.21 µg/mL). The xanthine oxidase inhibition (IC₅₀) ranged from 75.11 to 250.74 µg/mL compared to allopurinol (0.38 µg/mL). The results indicate that the various flavonoids, phenolic compounds, α-tocopherol, and other constituents which are present in propolis are responsible for the antioxidant and xanthine oxidation inhibition activity. To evaluate the safety studies of propolis, the pesticide residues were also monitored by LC-MS-MS 4500 Q-Trap. Trace amounts of pesticide residue (ng/mL) were detected in the samples, which are far below the permissible limit as per international guidelines.     

A Flexible Composite Mechanical Energy Harvester from a Ferroelectric Organoamino Phosphonium Salt

A new binary organic salt diphenyl diisopropylamino phosphonium hexaflurophosphate (DPDP?PF₆) was shown to exhibit a good ferroelectric response and employed for mechanical energy harvesting application. The phosphonium salt crystallizes in the monoclinic noncentrosymmetric space group Cc and exhibits an H‐bonded 1D chain structure due to N?H???F interactions. Ferroelectric measurements on the single crystals of DPDP?PF₆ gave a well‐saturated rectangular hysteresis loop with a remnant (P_r) polarization value of 6 μC cm^?2. Further, composite devices based on polydimethylsiloxane (PDMS) films for various weight percentages (3, 5, 7, 10 and 20 wt %) of DPDP?PF₆ were prepared and examined for power generation by using an impact test setup. A maximum output peak‐to‐peak voltage (V_PP) of 8.5 V and an output peak‐to‐peak current (I_PP) of 0.5 μA was obtained for the non‐poled composite film with 10 wt % of DPDP?PF₆. These results show the efficacy of organic ferroelectric substances as potential micropower generators.     

An ultra low power consumption millimeter-wave voltage controlled oscillator in a 65 nm CMOS-SOI technology

This paper presents an ultra low power consumption 65 GHz LC-VCO dedicated to wireless high data rate applications. It is designed in a 65 nm CMOS SOI process, which improves passive devices behavior. The proposed VCO achieves a frequency tuning range (FTR) of 9.7 % and a phase noise of ?110.86 dBc/Hz at 10 MHz of the carrier. All integrated passive components (including transmission lines and a transformer-based balun) are modeled using advanced electromagnetic (EM) field solvers. The power consumption of the proposed VCO is as low as 1.1 mW when biased by a 0.8-V supply voltage. The FoM of this millimeter wave circuit, whose core occupies a silicon footprint of only 0.047 mm², is ?184.07 dBc/Hz.     

A 4 Gsample/s 2 bits flash ADC with 2–4 GHz input bandwidth for radio astronomy applications

This paper presents the design and the measurement results of a high speed A/D converter (ADC or digitizer) developed for radio-astronomy applications and especially for the ALMA (Atacama Large Millimeter Array) project. This monolithic digitizer is implemented in a BiCMOS 0.35 μm SiGe process for high frequency mixed-signal applications. The main characteristics of this circuit are a 2 bits resolution with 3 quantization levels (equivalent to 1.5 bits) with 4 Gsample/s rate, a wide input bandwidth from 2 GHz up to 4 GHz under full Nyquist condition. The adopted digitizer architecture is that of a conventional flash analog to digital converter structure. The overall chip dissipates 652 mW under ± 1.25 V supply and the die area is 5.4 mm².