非线性编辑实验室的构建与实验教学

以计算机为操作平台的非线性编辑系统广泛应用于电视节目的制作 ,学校相关专业开设非线性编辑课程也需要配置非线性编辑系统作为学生实验用机。主要介绍一种学生实验用非线性编辑系统及实验室的配置方案以及该非线性编辑系统在实验教学中的性能特征。     

On teletraffic applications to OBS

We provide teletraffic models for loss probability evaluation of optical burst switching (OBS). We show that the popular Engset formula is not exact for OBS modeling and demonstrate that in certain cases it is not appropriate. A new exact model is provided. The various models are compared using numerical results for various OBS alternatives with and without burst segmentation.     

免疫珠技术快速检测腹泻性大肠杆菌

采用表面光滑玻璃珠作为载体材料，用1：40的腹泻性大肠杆菌诊断血清进行包被。可制成免疫珠。这种免疫珠能与腹泻性大肠杆菌发生特异性结合。经乳糖蛋白胨培养液培养，然后根据其产酸产气进行判断。能在18h内完成腹泻性大肠杆菌的检测。其灵敏度为样液中含有腹泻性大肠杆菌数必须大于10CFu／mL．该法简单、快速、易操作、灵敏度高。     

Effect of exponentially graded base doping on the performance ofGaAs/AlGaAs heterojunction bipolar transistors

The authors have fabricated n-p-n GaAs/AlGaAs heterojunction bipolar transistors (HBTs) with base doping graded exponentially from 5×10¹⁹ cm^-3 at the emitter edge to 5×10¹⁸ cm^-3 at the collector edge. The built-in field due to the exponentially graded doping profile significantly reduces base transit time, despite bandgap narrowing associated with high base doping. Compared to devices with the same base thickness and uniform base doping of 1×10¹⁹ cm^-3 , the cutoff frequency is increased from 22 to 31 GHz and maximum frequency of oscillation is increased from 40 to 58 GHz. Exponentially graded base doping also results ill consistently higher common-emitter current gain than uniform base doping, even though the Gummel number is twice as high and the base resistance is reduced by 40%     

线性电压扫描下1VIIS器件瞬态的简单模型

本文用准平衡模型分析讨论了线性电压扫描下MIS器件的I/V瞬态.文中除了给出一般的处理方法以外，还给出了几种不同电压扫描率下I/Y特性的计算结果，并与已往的模型作了比较.     

Synchronization of quadrature-quadrature phase-shift keying signals

The key synchronization aspects in the system design of a QQPSK (quadrature-quadrature phase-shift-keying) modem are addressed. The sensitivity of the data demodulator to synchronization errors is discussed, and contextually the performances of some IF and baseband carrier phase and symbol timing recovery schemes are evaluated both theoretically and by computer simulations. In particular, a fourth-power IF carrier/clock regenerator and two baseband clock recovery schemes, with and without the aid of data decisions, respectively, are taken into account. The analysis shows on the one hand the substantial robustness of QQPSK to carrier phase errors and the adequacy of the examined carrier extraction scheme. On the other hand, the remarkable sensitivity of QQPSK to symbol timing inaccuracy is stressed and the need to resort to the newly proposed decision-aided baseband clock recovery scheme is pointed out     

一类Marcinkiewicz积分交换子的端点估计

本文得到Ω满足Dini型条件时,Marcinkiewicz积分交换子μΩ,b(f)的端点估计:|{x∈R~n:μΩ,b(f)(x)＞λ}|≤c‖b‖BMO∫_(R~n)(|f(x)|)/λ(1+log+(|f(x)|)/λ)dx．     

绿色荧光粉YAGG∶Tb,Gd用于FED的尝试

FED器件的发展迫切需要具有化学和热稳定性 ,高亮度 ,长寿命的新型荧光材料。本文合成了Gd3 +离子共掺杂的YAGG∶Tb获得了YAGG∶Tb ,Gd ,并将其用于 0～ 30 0 0V低压范围 ,对其在不同电压和电流密度下的发光特性进行了测试。结果表明 ,该种材料特性优于ZnO∶Zn并且不存在电压与电流饱和     

A combined programming and iteration algorithm for finite element analysis of three-dimensional contact problems

Comparing with two-dimensional contact problems, three-dimensional frictional contact problems are more difficult to deal with, because of the unknown slip direction of the tangential force and enormous computing time. In order to overcome these difficulties, a combined PQP (Parametric Quadratic Programming) and iteration method is derived in this paper. The iteration algorithm, which alleviates the difficulty of unknown slip direction, is used along with the PQP method to cut down computing costs. Numerical example is given to demonstrate the validity of the present algorithm. The project supported by the Machinary and Electronics Ministry of China     

纳米β-Ni(OH)2与球型Ni(OH)2的热性能比较研究

用配位沉淀法合成出纳米级Ni（OH）2，并对其进行XRD，TEM，DSC分析，分析结果表明，所得纳米β-Ni（OH）2为可用作电极材料的β-Ni（OH）2，粒径为30－40nm，且热分解温度比普通球镍低10℃左右，摩尔分解热比普通球镍低4－7kJ，从理论上分析了产生此现象的原因。