Syntheses of new benzoxazole derivatives

2‐(Arylidene)cyanomethylbenzoxazoles have been prepared in water from benzoxazole‐2‐ylacetonitriles. Using multi‐component reactions, a variety of heterocycles containing benzoxazole and nitrile functionality has been prepared. J. Heterocyclic Chem., (2011).     

Alpha particle absorption and inclined incidence track parameters evaluation in plastic detectors

In this work the use of our recently constructed irradiation chamber was involved in the current experiments. The absorption of alpha particle in air has been studied through a set of experiments in which the stopping power has been measured. A comparison between the calculated values and the present experimental results is given and a good agreement has been found. Critical angle (θ_c) determination has been carried out using two different techniques, via indirect and direct measurements, under different etching conditions and at various alpha energies. An empirical fit of θ_c−h (h is the removal thickness layer) dependence has been calculated and found to work well in the studied h ranges. Also, the inclined alpha tracks parameters of energies between 1.0 and 5.0 MeV have been studied. Results can be successfully applicable in alpha autoradiography studies and detector efficiency determination for track registration in plastic recorders.     

Zn-Co bimetallic supported ZSM-5 catalyst for phosgene-free synthesis of hexamethylene–1,6–diisocyanate by thermal decomposition of hexamethylene–1,6–dicarbamate

A set of mono-and bimetallic(Zn-Co) supported ZSM-5 catalysts was first prepared by PEG-additive method. The physicochemical properties of the catalysts were investigated by FTIR, XPS, XRD, N_2adsorption-desorption measurements, SEM, EDS and NH3-TPD techniques. The physicochemical properties showed that the Zn Co_2O_4 spinel oxide was formed on the ZSM-5 support and provided effectual synergetic effect between Zn and Co species for the bimetallic catalyst. Furthermore, bimetallic supported ZSM-5 catalyst exhibited weak, moderate and strong acidic sites, while the monometallic supported ZSM-5 catalyst showed only weak and moderate or strong acidic sites. Their catalytic performances for thermal decomposition of hexamethylene–1,6–dicarbamate(HDC) to hexamethylene–1,6–diisocyanate(HDI) were then studied. It was found that the bimetallic supported ZSM-5 catalysts,especially Zn-2Co/ZSM-5 catalyst showed excellent catalytic performance due to the good synergetic effect between Co and Zn species, which provided a suitable contribution of acidic sites. HDC conversion of 100% with HDI selectivity of 91.2% and by-products selectivity of 1.3% could be achieved within short reaction time of 2.5 h over Zn-2Co/ZSM-5 catalyst.     

MHD flow and heat transfer over permeable stretching sheet with slip conditions

The magnetohydrodynamic (MHD) flow and heat transfer characteristics for the boundary layer flow over a permeable stretching sheet are considered. Velocity and thermal slip conditions are taken into account. Problem formulation is developed in the presence of thermal radiation. Governing non‐linear problem is solved by a homotopy analysis method. Convergence of the derived solutions is studied. Numerical values of skin‐friction coefficient and local Nusselt number are tabulated. Effects of pertinent parameters on the velocity and temperature profiles are discussed. Comparison between the present and previous limiting results is shown. Copyright © 2010 John Wiley & Sons, Ltd.     

Proper general decomposition (PGD) for the resolution of Navier–Stokes equations

In this work, the PGD method will be considered for solving some problems of fluid mechanics by looking for the solution as a sum of tensor product functions. In the first stage, the equations of Stokes and Burgers will be solved. Then, we will solve the Navier–Stokes problem in the case of the lid-driven cavity for different Reynolds numbers (Re = 100, 1000 and 10,000). Finally, the PGD method will be compared to the standard resolution technique, both in terms of CPU time and accuracy.     

退火温度对a-Se0.70Ge0.15Sb0.15薄膜的结构和光学性质的影响

研究了退火温度对Se0.70Ge0.15Sb0.15薄膜的影响.通过热蒸发技术,在300K温度下将大块无定形Se0.70Ge0.15Sb0.1s沉积在石英和玻璃衬底上.研究发现,未经过退火处理的薄膜结构和在300K,1.33×10-5Pa下退火1小时后的薄膜结构都是无定形结构,而在同样气压470K温度下退火1小时的薄膜有结晶现象.通过在300 2 500nm范围内垂直入射光方向上透射率和反射率的测试,研究了薄膜的一些光学参数,如消光系数(k),折射系数(n)和吸收系数(a).研究发现,n和k同热处理温度有关.通过光学数据的分析,得到了不同条件下薄膜的间接带隙宽度(Enong),未经过热处理薄膜的Enong是1.715±0.021eV,300K下退火薄膜的Enong是1.643±0.021eV,470K下退火的Enong是1.527±0.021eV.退火温度降低了带隙宽度Enong,但增加了带尾eo这种效应可以根据Mott和Davis提出的多晶体系中态密度来解释.     

Direct and indirect electrochemical oxidation of Indigo Carmine using PbO2 and TiRuSnO2

Journal of Solid State Electrochemistry - In this paper, the electrocatalytic properties of PbO2 and TiRuSnO2 anodes for direct and indirect electrochemical oxidation of a synthetic solution...     

利用原位红外光谱与微分电化学质谱联用技术研究在Pt以及PtRu电极上发生的甲醇氧化反应

利用电化学衰减全反射原位傅里叶变换红外光谱与微分电化学质谱联用技术,在流动电解池环境以及恒电位条件下研究了Pt电极和Pt电极通过表面电沉积Ru形成的PtRu电极(Pt_xRu_y)上发生的甲醇氧化反应(反应电解质溶液为0.1 mol/L HClO₄+0.5 mol/L MeOH). 在0.3～0.6 V(参比电极为可逆氢参比)实验用到的所有电极上,CO是唯一能从红外光谱观察到的与甲醇相关的表面吸附物;在Pt_0.56Ru_0.44电极上可以观察到CO吸附在Ru原子形成的岛上和CO线式吸附在Pt电极表面红外波段,而其他电极上只能观察到Pt表面上线式吸附的CO;甲醇氧化活性按Pt_0.73Ru_0.27>Pt_0.56Ru_0.44>Pt_0.83Ru_0.17>Pt的顺序递减;在0.5 V 时,甲醇在Pt_0.73Ru_0.27电极上的氧化反应的CO₂电流效率达到了50%.     

Analytical solution of time‐fractional Navier–Stokes equation in polar coordinate by homotopy perturbation method

In this letter, we implement a relatively new analytical technique, the homotopy perturbation method (HPM), for solving linear partial differential equations of fractional order arising in fluid mechanics. The fractional derivatives are described in Caputo derivatives. This method can be used as an alternative to obtain analytic and approximate solutions of different types of fractional differential equations applied in engineering mathematics. The corresponding solutions of the integer order equations are found to follow as special cases of those of fractional order equations. Some numerical examples are presented to illustrate the efficiency and reliability of HPM. He's HPM, which does not need small parameter is implemented for solving the differential equations. In this method, a homotopy is introduced to be constructed for the equation. The initial approximations can be freely chosen with possible unknown constants that can be determined by imposing the boundary and initial conditions. It is predicted that HPM can be found widely applicable in engineering. © 2009 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 2010     

Chitosan/cyclodextrin nanoparticles as drug delivery system

One of the most attractive areas of research in drug delivery is the design of nanomedicines consisting of nanosystems that are able to deliver drugs to the right place, at appropriate time. Natural polysaccharides, due to their outstanding merits, have received more and more attention in the field of drug delivery systems. In particular, polysaccharides seem to be the most promising materials in the preparation of nanometric carriers. The main goal of the present study was to investigate the potential of a recent generation of hybrid polysaccharide nanocarriers, composed of chitosan (CS) and an anionic cyclodextrin, carboxymethyl-β-cyclodextrin (CM-β-CD), for the encapsulation of a model drug, sulindac. CS and CM-β-CD were processed to nanoparticles (NPs) via the ionotropic gelation technique. The stoichiometric ratio between these two polymers was found to influence particle size and zeta potential. Decreasing CS:CM-β-CD ratio led to an increase in particle size and decrease in zeta potential. DSC and FTIR analyses confirmed formation of NPs and encapsulation of sulindac inside them. Release profiles indicate a continuous release of the drug throughout 24?h. However, the rate of release was more rapid during the first hours; about 55–90% of the drug being released after 3?h.