Chemiluminescence from the oxidation of urea and ammonia with hypobromite and N-bromosuccinimide

The spectral distribution for the chemiluminescent oxidation of ammonia with hypobromite is significantly different to that for the oxidation of ammonia with N-bromosuccinimide. Therefore, in contrast to the assumptions of several authors, the action of N-bromosuccinimide is not solely derived from the in situ formation of hypobromite. Neither the oxidation of urea with hypobromite nor the oxidation of urea with N-bromosuccinimide involves an initial hydrolysis of urea to ammonia in the alkaline solution. However, these two reactions lead to a common emitter. The addition of xanthene dyes, such as dichlorofluorescein, enhance the chemiluminescence intensity by energy transfer to the efficient fluorophore, but reaction between the sensitiser and hypobromite can result in a significant increase in the background signal. A list of potential interferences has been compiled; particular attention was paid to guanidino compounds, as the chemiluminescence accompanying the oxidation of this functional group has not been previously discussed.     

Stress development during drying of calcium carbonate suspensions containing carboxymethylcellulose and latex particles

Stress development during drying of coatings produced from aqueous dispersions of calcium carbonate particles in the presence and absence of organic binders was studied using a controlled-environment stress apparatus that simultaneously monitored drying stress, weight loss, and relative humidity. Specifically, the influence of two organic binders on drying stress evolution was investigated: (1) carboxymethylcellulose, a water-soluble viscosifying aid, and (2) a styrene-butadiene latex emulsion of varying glass transition temperature. The stress histories exhibited three distinct regions. First, a period of stress rise was observed, which reflected the capillary tension exerted by the liquid on the particle network. Second, a maximum stress was observed. Third, it was followed by a period of either stress decay or rise depending on the organic species present. Significant differences in stress histories were observed between coatings containing soluble and nonsoluble binders. Maximum drying stresses (sigmamax) of 0.2-0.5 MPa were observed for coatings produced from pure calcium carbonate or calcium carbonate-latex suspensions, whereas coatings with carboxymethylcellulose exhibited substantially higher sigmamax values of 1-2 MPa. Upon drying, these coatings were quite hygroscopic, such that cyclic variations in relative humidity induced large cyclic changes in residual stress.     

Reactions of triosmium clusters with organic azides; x-ray crystal structures of [Os3(CO)10(NCMe)(N3COPh)], [Os3(μ-H)(CO)10(HN3Ph)], and [Os3(μ-H)2(CO)9(μ3-NPh)]

Organic azides [N₃R] react with [Os₃(CO)₁₁(NCMe)] and with [Os₃(μ-H)₂(CO)₁₀] to form [Os₃(CO)₁₀(NCMe)(N₃COR)] (R  Ph) and [Os₃(μ-H)(CO)₁₀(HN₃R)] (R  Ph, n-Bu, CH₂Ph, cyclo-C₆H₁₁), respectively; the latter may be converted to [Os₃(μ-H)₂(CO)₉(μ₃-NR)] by thermolysis; the molecular structure of the phenyl derivative of each class of compound has been confirmed by x-ray analysis.     

Cluster Build-up Reactions using Di-gold Cationic Fragments: Synthesis and Structural Characterization of [Os7(CO)19(Au2dppm)]

The reaction of the di-gold cation [Au₂(dppx)]²⁺ with the heptanuclear cluster dianion [Os₇(CO)₂₀]^2– affords the mixed metal cluster [Os₇(CO)₂₀{Au₂(dppx)}] (x=m (1), e (2), b (3)). On standing, in solution, this complex undergoes decarbonylation to give the cluster [Os₇(CO)₁₉{Au₂(dppx)}] (x=m (4), e (5), b (6)). The complexes have been characterised spectroscopically, and an X-ray structure determination of the dppm derivative shows that it contains a metal core based on an Os₇ edge-bridged bicapped tetrahedron with the two ₃-Au atoms capping adjacent triangular Os₃ faces of the central tetrahedron. In an analogous reaction, the carbido anion [Os₇(H)C(CO)₁₉]^– affords the neutral cluster [Os₇C(CO)₁₉{Au₂(dppm)}] (7) when treated with [Au₂(dppm)]²⁺ in the presence of base.     

Procedures for the enhancement of selectivity in liquid phase chemiluminescence detection

An overview of liquid phase chemiluminescence (CL) processes is presented and the potential for CL detection in liquid chromatography (LC) is discussed, with particular reference to the luminol and peroxyoxalate reactions. Post column ion displacement from a solid phase reagent [a cation exchange resin in the copper(II) form] followed by catalysis of the luminol reaction is used for the quantification of mixtures of weak acids after separation by ion-exclusion chromatography. Polyaromatic hydrocarbons (PAHs) released during the combustion of biomass fuels are separated by reversed-phase chromatography and quantified by their sensitizing effect on the peroxyoxalate reaction. This procedure is also used for the determination of carboxylic acids in non-aqueous media after selective pre-column derivatization with a fluorescent label (9-anthracenemethanol).     

Synthesis and Characterisation of a Thiocarbonyl containing Osmium Cluster

Reaction of CS₂ with H₂Os₃(CO)₈(MeCN)S in cyclohexane yields a product H₂Os₃(CO)₇(CS)S₂. this has been characterised by NMR and mass spectroscopy, and by X-ray analysis, and has been shown to contain a terminal thiocarbonyl ligand.     

On-line LC-GC-AED and LC-GC-MS – multidimensional methods for the analysis of PAC in fuels,combustion emissions and atmospheric samples

The composition and concentration of polycyclic aromatic compounds (PAC) in fuels. Theier combustion products and in the atmosphere remains a topic of considerable interest. Despite the wealth of literature on the identification of PAC, speciation at low concentrations remains difficult due to instrument limitation and the complexity of fuel and environmental samples. Consequently on line sample preparation procedures (SPE, SFE, LC, etc.) are becomeing an increasingly important step in the analysis procedure particularly where sample clean-up and fractionation are essential for improving analytical resolution. In this study a normal phase high pressure analytical resolution. In this study a normal phase high pressure liquid chromatography-gas chromatography (LC-GC) system has been developed to provide quantitative analysis of samples, as diverse as coal liquids, petroleum fuels, diesel exhaust particulates, and urban air particulates. Separation and identification of parent and alkylated PAH, hetercycline nitro-and oxy-PAC can be achieved by direct coupling to an atomic emission detector and a bech top mass spectrometer. For both systems the primary LC separation combined with the large sample volume transferred to GC vastly improves detection limits. Furthermore the complimentary nature of the two detectors used enables the positive indentification of many unknowns.     

Photoproteins as luminescent labels in binding assays

Certain marine organisms produce calcium-activated photoproteins that allow them to emit light for a variety of purposes, such as defense, feeding, breeding, etc. Even though there are many bioluminescent organisms in nature, only a few photoproteins have been isolated and characterized. The mechanism of emission of light in the blue region is the result of an internal chemical reaction. Because there is no need for excitation through external irradiation for the emission of bioluminescence, the signal produced has virtually no background. This allows for the detection of the proteins at extremely low levels, making these photoproteins attractive labels for analytical applications. In that regard, the use of certain photoproteins, namely, aequorin, obelin, and the green fluorescent protein as labels in the design and development of binding assays for biomolecules has been reviewed. In addition, a related fluorescent photoprotein, the green fluorescent protein (GFP), has been recently employed in bioanalysis. The use of GFP in binding assays is also discussed in this review.     

Molecular orbital calculations on solvents and other small molecules: Correlation between electronic and molecular properties ν, αMOL, π*, and β.

Molecular orbital calculation by the MINDO/3 method are reported for 50 compounds used as solvents in chemical reactions. Relationships between various parameters of electronic structure and molecular properties such as dipole moment, polarizability and Taft solvent parameters are presented. Comparison between experimental values of π* and calculated values is given.     

Synthesis of mixed metal decaosmium carbido clusters: The X-ray structures of the monoanions [Os10C(CO)24Cu(NCMe)]− and [Os10C(CO)24AuPPh3]−

The high nuclearity mixed metal cluster monoanions [Os₁₀C(CO)₂₄Cu(NCMe)]^? (I) and [Os₁₀C(CO)₂₄AuPPh₃]^? (II) have been obtained by reaction of the carbido-dianion [Os₁₀C(CO)₂₄]^2? (III) with one equivalent of [Cu(NCMe)₄] [BF₄] and Ph₃PAuCl, respectively, in CH₂Cl₂. X-ray analysis of the [PPh₃Me]⁺ salts of I and II show that the Cu and Au ligands have added to capping tetrahedra of the dianion III in μ₃- and μ₂-bridging positions, respectively.