A chloride ion nanosensor for time-resolved fluorimetry and fluorescence lifetime imaging

In this work, the first CdSe/ZnS quantum dot (QD) photoluminescence lifetime based chloride ion nanosensor is reported. The acridinium dication lucigenin was self-assembled on the surface of negatively charged mercaptopropionic acid capped QDs to achieve QD-lucigenin conjugates. Upon attachment, a drastic decrease of the photoluminescence lifetime of both QD nanoparticles and lucigenin is observed by virtue of a charge transfer mechanism. Since lucigenin is a chloride-sensitive indicator dye, the photoluminescence decay of QD-lucigenin conjugates changes by adding chloride ion. The photoluminescence lifetime of the QDs in the conjugate increases after reacting with Cl(-), but also shows a concomitant decrease in the lucigenin lifetime immobilized on the surface. The photoluminescence lifetime of QD-lucigenin nanosensors shows a linear response in the Cl(-) concentration range between 0.5 and 50 mM. Moreover, the ratio τ(ave)(QD)/τ(ave)(luc) can be used as an analytical signal since the lifetime ratio presents a linear response in the same Cl(-) concentration range. The system also shows good selectivity towards most of the main anions and molecules that can be found in biological fluids. These nanosensors have been satisfactorily applied for Cl(-) determination in simulated intracellular media with high sensitivity and high selectivity. Finally, we demonstrate the potential application of the proposed nanosensor in confocal fluorescence lifetime imaging (FLIM). These results show the promising application of the QD-lucigenin nanosensors in FLIM, particularly for intracellular sensing, with the invaluable advantages of the time-resolved fluorescence techniques.     

Variation of electrochemical capacitor performance with Room Temperature Ionic Liquid electrolyte viscosity and ion size

The use of Room Temperature Ionic Liquid (RTIL) electrolytes promises to improve the energy density of Electrochemical Capacitors (ECs) by allowing for operation at higher voltages. RTIL electrolytes 1-ethyl-3-methylimidazolium tetrafluoroborate (EMImBF(4)), 1-ethyl-3-methylimidazolium dicyanamide (EMImN(CN)(2)), 1,2-dimethyl-3-propylimidazolium bis(trifluoromethylsulfonyl)imide (DMPImTFSI), and 1-butyl-3-methylpyrrolidinium tris(pentafluoroethyl)trifluorophosphate (BMPyFAP) were studied. Tetraethylammonium tetrafluoroborate 1 molar solution in anhydrous propylene carbonate (Et(4)NBF(4)-PC 1M) was studied for comparison purposes. Carbon was produced from phenolic resin activated in CO(2). The porosity of the carbon samples were characterised by N(2) adsorption-desorption at 77 K and the relevant electrochemical behaviour was characterised by galvanostatic charge-discharge, electrochemical impedance spectroscopy and cyclic voltammetry. The highest operating voltage of 3.5 V was obtained for BMPyFAP, whilst the best capacitive performance was obtained for EMImBF(4). The maximum energy density increased to 70 Wh kg(-1) (carbon) for RTIL EMImBF(4) from 35 Wh kg(-1)(carbon) for the organic electrolyte Et(4)NBF(4)-PC 1M. It was found that the performance of the RTIL electrolytes could be related to the IL viscosity and ion size whilst the electrolyte equivalent series resistances produced a linear relationship with viscosity. It was found that the capacitance performance of the RTIL electrolytes followed the order EMImBF(4) > DMPImTFSI > BMPyFAP > EMImN(CN)(2). The electrolyte and equivalent series resistance were in the order EMImN(CN)(2) < EMImBF(4) < DMPImTFSI < BMPyFAP.     

The h-SbxWO3+2x Oxygen Excess Antimony Tungsten Bronze

We describe the previously unreported oxygen excess hexagonal antimony tungsten bronze with composition Sb_0.5W₃O₁₀, in the following denoted as h-Sb_xWO_3+2x with x=0.167, to demonstrate its analogy to classical A_xWO₃ tungsten bronzes. This compound forms in a relatively narrow temperature range between 580 °C<T<620 °C. It was obtained as a dark-blue polycrystalline powder, and as thin, needle-shaped, blue single crystals. h-Sb_xWO_3+2x crystallizes in the hexagonal space group P6/mmm with the cell parameters a=7.4369(4) Å and c=3.7800(2) Å. The antimony and excess oxygen occupy the hexagonal channels within the network of corner-sharing WO₆ octahedra. h-Sb_xWO_3+2x has a resistivity of ρ_{300 K}≈1.28 mΩ cm at room temperature, with little if any temperature-dependence on cooling. DFT calculations on a simplified model for this compound find a metallic-like electronic structure with the Fermi level falling within rather flat bands, especially around the Γ point.     

An [FeIII34] Molecular Metal Oxide

The dissolution of anhydrous iron bromide in a mixture of pyridine and acetonitrile, in the presence of an organic amine, results in the formation of an [Fe₃₄] metal oxide molecule, structurally characterised by alternate layers of tetrahedral and octahedral Fe^III ions connected by oxide and hydroxide ions. The outer shell of the complex is capped by a combination of pyridine molecules and bromide ions. Magnetic data, measured at temperatures as low as 0.4 K and fields up to 35 T, reveal competing antiferromagnetic exchange interactions; DFT calculations showing that the magnitudes of the coupling constants are highly dependent on both the Fe‐O‐Fe angles and Fe?O distances. The simplicity of the synthetic methodology, and the structural similarity between [Fe₃₄], bulk iron oxides, previous Fe^III–oxo cages, and polyoxometalates (POMs), hints that much larger molecular Fe^III oxides can be made.     

An unexpected formation of pyrazolopyrimidines during the attempted to obtain 5-substituted tetrazoles from carbonitriles

In this Letter, we described the synthesis of new 5-(5-amino-1-aryl-1H-pyrazole-4-yl)-1H-tetrazoles 2a–c from 5-amino-1-aryl-1H-pyrazole-4-carbonitriles 1a–c as well as the unexpected 1H-pyrazolo[3,4-d]pyrimidine derivatives 6a–c from 5-amino-1-aryl-3-methyl-1H-pyrazole-4-carbonitriles 4a–c, instead of 5-(5-amino-1-aryl-3-methyl-1H-pyrazole-4-yl)-1H-tetrazoles 5a–c as desired. In an attempt to obtain these tetrazole derivatives containing the methyl group at C3-position in the pyrazole ring, the amino group in 5-amino-1-(4-methoxyphenyl)-3-methyl-1H-pyrazole-4-carbonitrile 4c was protected by the reaction with sodium hydride and di-tert-butyl-dicarbonate (Boc). The tetrazole derivative 5c was synthesized from the protected compound 7c using analogue methodology to obtain 2a–c and 6a–c.     

Systematic Study of the Interaction Between VIV Centres and LnIII Ions in Well Defined {V 2 IV LnIII}{AsIIIW9O33}2 Sandwich-Type Clusters: Part 2

The gadolinium (Gd) member of a new type of heteropolytungstates that contain one lanthanide and two transition metal ions in a triangular arrangement is reported. The compound NaK₆Gd_0.33 [((VO)₂Gd(H₂O)₄K₂(H₂O)₂(Na)(H₂O)₂)(α-B-AsW₉O₃₃)₂]·24H₂O (1) was prepared from acidified aqueous solutions of Na₂WO₄·2H₂O, As₂O₃ and VOSO₄·5H₂O to which Gd³⁺ ions were added. The single crystal X-ray structure analysis (monoclinic, space group P2₁/m) shows that the anion consists of two [α-B-As^IIIW₉O₃₃]^9? trilacunary Keggin-type units linked by two VO²⁺, one Gd³⁺ as well as weakly by two K⁺ and one Na⁺ ions, resulting in a sandwich-type structure with idealized C _2v symmetry. The problem of positioning crystal lattice and special polyoxometalate sites with different cations is discussed also in connection with supramolecular chemistry aspects and as an option for further research. A fit of the magnetic susceptibility yielded exchange coupling constants of J _VV = ?2.55 cm^?1 (anti-ferromagnetic) between the vanadium ions and J _GdV = 0.6 cm^?1 (ferromagnetic) between the Gd and each of the two vanadium ions. The complete magnetochemical analysis also revealed a partial occupancy of the Na⁺ sites in the counter-cation–water system by Gd³⁺ ions (0.33 Gd³⁺ ions in total).     

Changes of organic acids and phenolic compounds contents in grapevine berries during their ripening

Changes of total content of phenolic substances, alteration in total titratable acidity and differences in tartaric acid content in grapes of four white (Müller-Thurgau — MT, Pinot Blanc — Rulandské bílé in Czech, RB, Sauvignon (Sg), and Muscat Ottonel — Mu?kát Ottonel in Czech, MO) and two blue (Dornfelder — Df and Blue Frankish — Frankovka in Czech, Fr) grapevine varieties throughout their growth, ripening and maturing (July–November). Potentiometric titration was applied for the determination of total titratable acids in grapes (expressed as tartaric acid equivalents in g L^?1). A spectrophotometric method according Rebelein based on the formation of a colored complex of ammonium metavanadate and tartaric acid was used for determination of tartaric acid in green juice made by pressing unripe grapes. A spectrophotometric method based on reduction of phosphomolybdato-tungsten complex in alkaline solution using Folin-Ciocalteau reagent was applied for determination of total content of phenolic substances (TCP).

Open image in new window