Raman spectroscopic study of the hydration of short-chain poly(oxyethylene)s C <Subscript>1</Subscript>E<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript>C <Subscript>1</Subscript> (<Emphasis Type="Italic">n</Emphasis>=1−4)

The hypothesis that the degree of hydration of poly(oxyethylene) (POE) in aqueous solution depends on the mole ratio of water molecules to ether oxygen atoms in the molecule has been verified by studying the isotropic Raman spectra in the O−H stretching region for four short-chain POEs (C ₁E _n C ₁ withn=1−4). Excellent coincidence of the O−H stretching Raman band for all four POEs studied in the range of mole ratio H₂O/O _ether from 25 to 0.6 was observed, thus confirming the assumption stated above. A conclusion that all ether oxygen atoms in the POE molecule participate in hydrogen bonding with water molecules has been made.     

Kinetic and thermodynamic acidities of substituted 1-benzyl-1-methoxy-2-nitroethylenes. Strong reduction of the transition state imbalance compared to other nitroalkanes

Acidity constants of six substituted 1-benzyl-1-methoxy-2-nitroethylenes (2-Z with Z = m-NO(2), m-CF(3), m-Cl, H, p-Me, p-MeO) and their respective nitronic acids were determined in 50% DMSO-50% water (v/v) at 20 degrees C. Kinetic data were obtained on the reversible deprotonation of all six 2-Z by OH(-) and piperidine and on the reversible deprotonation of 2-NO(2)() by piperazine, 1-(2-hydroxyethyl)piperazine, and morpholine in the same solvent. These data allowed a determination of the Br?nsted coefficients alpha (dependence on acidity of 2-Z) and beta (dependence on amine basicity). The fact that alpha > beta indicates the presence of a transition state imbalance which, however, is much smaller than that for the deprotonation of arylnitromethanes. The reasons for this reduction in the imbalance and their relevance to a recent study of the deprotonation of Fischer carbene complexes are discussed.     

Electrochemical technique for the determination of fractal dimension of dental surfaces

Fractal dimension of a carious tooth surface was determined using an electrochemical method. The method was based on time-dependent diffusion towards electrode surfaces, which is one of the most useful and reliable methods for the determination of fractal dimension of electrode surfaces. For this purpose, the tooth was covered with a gold layer, which acted as an electrode in electrochemical experiments. It is suggested that the fractal dimension can be used as a quantitative measure of the state of dental surfaces. The method presented demonstrates the power of electrochemical techniques for the determination of fractal dimension of surface of non-conducting objects.     

Stabilization of γ‘ phase in Bi<Subscript>4</Subscript>V<Subscript>2-x</Subscript>Fe<Subscript>x</Subscript><Superscript>II</Superscript>O<Subscript>11-1.5x</Subscript> series

Summary This work reports the room-temperature stabilization of the Bi₄V_2-xFe_x^IIO_11-1.5x γ ‘ phase, a promising ionic conductive material that finds application in solid oxide fuel cell and oxygen sensor devices. The Fe(II) cation proved to be a better stabilizer than Fe(III), which was previously used, since a lower substitution degree of V⁵⁺ is needed for the former. Powder X-ray diffraction, Fourier-transform infrared spectroscopy and differential scanning calorimetry were used in these experiments.     

Liquid-liquid-liquid phase microextraction of aromatic amines in water using crown ethers by high-performance liquid chromatography with monolithic column

Liquid-liquid-liquid phase microextraction (LLLME) coupled with high-performance liquid chromatography (HPLC) for the analysis of some aromatic amines is described. These compounds were extracted from 4.0 mL aqueous sample that adjusted to pH 13 with, NaOH-NaCl buffer solution (donor phase, P₁) into an organic phase (P₂) 150 μl benzyl alcohol and ethyl acetate (2:1) and then back extracted into a microdrop of aqueous acceptor phase (P₃), adjusted at pH 2, with Na₂HPO₄-H₃PO₄ buffer solution. The extraction time, T₁ (from P₁ to P₂) was 20 min and T₂ (from P₂ to P₃) was 1 min. Different crown ethers as complexing agents for amines were added to the acceptor phase to improve the extraction time. Factors such as organic solvents, extraction times, and addition of crown ethers to acceptor phase and stirring rate were optimised. The method was applied for determination of aromatic amines in wastewater samples. Enrichment factors ranged from 184.5 to 389.7. The linearity range was from 3 to 1000 ng/ml and the detection limits varied from 0.8 to 1.80 ng/ml. Relative standard deviations (%, n = 5) were found (at S/N 3) in the range of 1.9 to 10.1. All experiments were carried out at room temperature, 22 ± 0.5 °C.     

A new approach in assessing microbiological results in water analysis proficiency testing

Due to the relatively large spread in the results of microbiological proficiency tests, the z-scores are often not able to detect zero or low results as being ‘bad’ results. This paper describes an adapted z-score based on the average or the standard deviation of the 50% ‘highest’ results. The combination of the adapted z-scores of four samples enables a better judgement of the performance of each laboratory. Papers published in this section do not necessarily reflect the opinion of the Editors, the Editorial Board or the Publisher.     

Trennung,Identifizierung und Bestimmung von Bactericiden auf der Basis von halogenierten Aromaten mittels Gas-Chromatographie

The separation of a mixture of 22 bactericides has been achieved by gas chromatography on columns with silicone rubber W-982 as stationary phase with temperatures between 100° and 300°C. The unchanged compounds as well as their silylation products have been used. The latter are more conveniently used especially for the quantitative determination. To be able to calculate the retention indices after Kovats gas chromatography has been performed isothermally at 180°C for the more volatile compounds and at 250°C for all other bactericides.The retention indices obtained under these conditions are tabulated together with the limits of detection.     

Tying together the ultrastructural modifications of wood fibre induced by pulping processes with the mechanical properties of paper

The composition and ultrastructural arrangement of cell wall polymers in wood fibres have determining influence on the properties of wood derived materials. It is therefore important to improve our understanding of the relationship between fibres organisation, the modifications induced by pulping treatments, and the resulting paper sheet mechanical properties. The different treatments to which fibres are subjected during the manufacturing of pulps and papers induce morphological and micro-structural alterations due to the removal of wall constituents and of microfibrillar elements. The impact of pulping processes on fibres was investigated at the ultrastructural scale of transmission electron microscopy. Particular attention was given to the effects of beating in refiners at various intensities on the ultrastructure of fibres. The most characteristic effects consisted of delaminations, microfibril disorganisation, and even fractures, of varying importance depending on the intensity of the mechanical refining. The consequences of internal alterations and surface modifications of the fibres were examined in relation to the paper sheet mechanical properties. Correlations between the type of alteration observed in the fibres and its possible impact on a given paper mechanical property are suggested. With similar approaches, the effects of drying and recycling were studied.     

Stereoselectivity of (−)-(1<Emphasis Type="Italic">R</Emphasis>,2<Emphasis Type="Italic">S</Emphasis>)-2-methylamino-1-phenylpropan-1-ol preparation

Stereoselectivity of reductive amination of (R)-1-hydroxy-1-phenylpropan-2-one by methylamine was studied. From the four isomers possible, only two are produced by this reaction. These are marked as (−)-(1R,2S)-ephedrine (desired product) and (+)-(1S,2R)-ephedrine. The reaction stereoselectivity depends both on the type of the catalyst and reaction conditions. The most suitable type is the supported platinum. However, this catalyst rapidly deactivates. With a decreasing activity of Pt catalyst, the stereoselectivity decreases. It is also decreased during the production of the second liquid phase (water) in the reaction mixture.     

The effect of amino acid deletions and substitutions in the longest loop of GFP

Background  

The effect of single and multiple amino acid substitutions in the green fluorescent protein (GFP) from Aequorea victoria has been extensively explored, yielding several proteins of diverse spectral properties. However, the role of amino acid deletions in this protein -as with most proteins- is still unknown, due to the technical difficulties involved in generating combinatorial in-phase amino acid deletions on a target region.