Synthesis of a Naphthalimide Functionalized Calix[4]arene; A Host Type Fluorophore for Inclusion Compounds in Organic Medium

This article reports the synthesis and the properties of 5,11,17,23-tetra(t-butyl)-25,27-bis-(ethoxy-1,8-naphthalimide)-26,28-hidroxy-calix[4]arene and the formation of an inclusion compound in organic medium. This functionalized calix[4]arene was conceived as the association of a potential host species with a good fluorophore for optical sensoring purposes. Calix[4]-NI as we will call it, maintains its ‘cone-pinched’ configuration and exhibits typical naphthalimide fluorescence bands in non-polar solvents. Its ability to interact with guest species via hydrogen bonding in its endo-hydrophilic cavity to form inclusion compounds was verified with absorption and fluorescence measurements using N-ethanol-1,8-naphthalimide as guest species, which was projected to fit exactly the host cavity and to interact with its naphthalimide π electrons. For this reason, it was possible to follow the formation of the inclusion compound with electronic spectroscopy.     

Additions of enantiopure alpha-sulfinyl carbanions to (S)-N-sulfinimines: asymmetric synthesis of beta-amino sulfoxides and beta-alphamino alcohols

The addition of the lithium anions derived from (R)- and (S)-methyl and -ethyl p-tolyl sulfoxides to (S)-N-benzylidene-p-toluenesulfinamide provides an easy access route to enantiomerically pure beta-(N-sulfinyl)amino sulfoxides. Stereoselectivity can be achieved when the configurations at the sulfur atoms of the two reagents are opposite (matched pair), thus resulting in only one diastereoisomer, even for the case in which two new chiral centers are created. The N-sulfinyl group primarily controls the configuration of the carbon bonded to the nitrogen, whereas the configuration of the alpha-sulfinyl carbanion seems to be responsible for the level of asymmetric induction, as well as for the configuration of the new stereogenic C-SO carbon in the reactions with ethyl p-tolyl sulfoxides. An efficient method for transforming the obtained beta-(N-sulfinyl)amino sulfoxides into optically pure beta-amino alcohols, based on the stereoselective non-oxidative Pummerer reaction, is also reported.     

One-step electrochemical synthesis of pure poly(2,5-dicyano-p-phenylenevinylene) films

In this communication we describe the electrochemical synthesis of poly(2,5-dicyano-p-phenylenevinylene) (DCNPPV) polymer films on indium tin oxide substrates. We investigate the purity, morphology, absorption and emission properties of the film. The purity was checked by infrared spectroscopy. The film formed presented spectroscopic purity equivalent to the chemically prepared PPV that was dialyzed for one week. Scanning electron microscopy of the surface revealed a grain-like morphology. The absorption and emission spectra showed absorption and emission bands at 420 nm and 575 nm, respectively, with the absorption onset at 422 nm, which corresponds to an energy gap of 2.25 eV. The electrochemical determination of the energy gap gives 2.05 eV, thus quite close to the optical energy gap at the onset of absorption. The EA and IP were determined by electrochemical measurements and are 3.46 eV and 5.51 eV, respectively.

The mass spectra of [17-13C]phyllocladene and [3-13C]methylenecholestane—III

The mass spectra of [17-¹³C]phyllocladene and [3-¹³C]methylenecholestane have been examined. It is shown that there are some rearrangements at 70 e V as in the case of [17-¹³C]kaurene. However, no extensive randomization is evident at the molecular ion level. The results are interesting because very little is known about ¹³C randomization in polycyclic aliphatic hydrocarbons. The percentage retention of label was calculated for each ion.     

Practical aspects of carbon content determination in carburized steels by EPMA.

The carbon contents in carburized steels were investigated by electron probe microanalysis (EPMA) for a range of carbon levels in the solid solution less than 1 wt%. This article describes the difficulties encountered with the classic analytical procedure using the k ratio of X-ray intensities and the phi(rhoz) model. Here, a suitable calibration curve method is presented with emphasis on the metallographic study of standard specimens and on the carbon decontamination of samples.     

Electrokinetic molecular separation in nanoscale fluidic channels

This report presents a study of electrokinetic transport in a series of integrated macro- to nano-fluidic chips that allow for controlled injection of molecular mixtures into high-density arrays of nanochannels. The high-aspect-ratio nanochannels were fabricated on a Si wafer using interferometric lithography and standard semiconductor industry processes, and are capped with a transparent Pyrex cover slip to allow for experimental observations. Confocal laser scanning microscopy was used to examine the electrokinetic transport of a negatively charged dye (Alexa 488) and a neutral dye (rhodamine B) within nanochannels that varied in width from 35 to 200 nm with electric field strengths equal to or below 2000 V m-1. In the negatively charged channels, nanoconfinement and interactions between the respective solutes and channel walls give rise to higher electroosmotic velocities for the negatively charged dye than for the neutral dye, towards the negative electrode, resulting in an anomalous separation that occurs over a relatively short distance (<1 mm). Increasing the channel widths leads to a switch in the electroosmotic transport behavior observed in microscale channels, where neutral molecules move faster because the negatively charged molecules are slowed by the electrophoretic drag. Thus a clear distinction between "nano-" and "microfluidic" regimes is established. We present an analytical model that accounts for the electrokinetic transport and adsorption (of the neutral dye) at the channel walls, and is in good agreement with the experimental data. The observed effects have potential for use in new nano-separation technologies.     

Determination of coumarins by voltammetric techniques in micellar and emulsified media

An electroanalytical study of the oxidation processes of umbelliferone and hymecromone at a glassy carbon electrode in micellar solution and emulsified medium by different voltammetric techniques is described. The non-ionic surfactant Triton X-405 in acetate-buffered medium at pH 4.8 was found to be the most suitable. Different ranges of linearity were obtained in the micellar solutions, depending on the technique used; the limits of determination for differential pulse voltammetry (DPV) at a stationary electrode were 2.9×10^?6 mol l^?1 and 3.3×10^?6 mol l^?1 for umbelliferone and hymecromone, respectively. In the emulsified medium formed with a mixture of toluene and ethyl acetate (3:2), the oxidation processes yielded similar results. With DPV, linear calibration plots were obtained in the ranges 1.0×10^?5–9.0×10^?7 mol l^?1 umbelliferone and 1.0×10^?5–2.0×10^?6 mol l^?1 hymecromone. The media used are predominantly aqueous so that special reference electrodes and solvent purification are not needed.     

Dehydration and crystallization process in sol-gel zirconia

Sol-gel zirconia was characterized using high-resolution thermogravimetry (Hi-Res TG) and differential scanning calorimetry (DSC) and compared with X-ray diffraction, Raman scattering, and UV-Vis spectroscopy. ZrO_2-x(OH)_2x·yH₂O annealed below 400°C show typical behavior of amorphous material. As the annealing temperature is increased, the tetragonal and monoclinic phases crystallize. Typical Hi-Res TG curve shows that the samples are continuously dehydrated in a long temperature range, between room temperature and 600°C. The total mass loss relative to the initial mass is of about 29%. The DSC analysis coupled with TG and structural information, indicate that the exothermic processes about 355 and 447°C can be related to the nucleation process of the formation of tetragonal zirconia, with bulk crystallization at 447°C. This revised version was published online in July 2006 with corrections to the Cover Date.     

A novel synthesis of 3-cyanoindoles and a new route to indole-3-carboxylic acid derivatives

2-Alkyl-3-cyanoindoles are obtained when 1-alkylmethyl-2-chloro-(or 2-phenylsulfonyl)-3-phenylsulfonylindoles are reacted with excess azide ion (90°/DMF). The reaction is considered to occur by a fragmentation recombination process in which the Schiff's base $\text{12}$ is of central importance. This proposal is supported by the formation of 2-substituted indole-3-carboxylates $\text{17}$ from aldehydes and the α-phenylsulfonyl-$\text{o}$-aminophenylacetic acid ester derivative $\text{16}$.     

Copper corrosion in buffered and non-buffered synthetic seawater: a comparative study

The electrochemical behaviour of copper in neutral buffered and non-buffered synthetic seawater and in pure chloride solutions has been studied by cyclic voltammetry, weight loss measurements, open circuit potential and scanning electron microscopy (SEM). Values of the repassivation potentials of Cu in non-buffered and buffered synthetic seawater, at 50 mV s^–1, were 0.12 and 0.46 V vs. SCE, respectively. The sharpness, heights and location of the different peaks as well as their charges were shown to be influenced by the composition of the solution, buffering conditions, deoxygenation, polarization potential and time. High chloride concentrations lead to higher oxidation charges. The anodic and the cathodic charges were shown to increase as the chloride concentration increases. The open circuit potential transients of copper in non-deoxygenated, non-buffered synthetic seawater indicate pitting from the beginning of the exposure, while in buffered solutions the pitting appeared only after a quite long exposure period, i.e. after 40 days. Corrosion rates of Cu samples after 3 months of immersion were higher in solutions of pure chloride (0.5 M) than in synthetic seawater. After six months the differences were even more noticeable. SEM images have showed a somewhat higher density of pits on copper samples immersed in the chloride solution (0.5 M), in comparison with those in synthetic seawater.