Cascade assembly of the benzo[a]anthraquinone ring system common to the angucycline antibiotics

A benzo[a]anthraquinone ring system, common to a group of angucycline antibiotics, has been prepared by a unique cascade of reactions. The reaction sequence was initiated by a Suzuki-Miyaura cross-coupling between a bromoquinone and vinyl boronic anhdyride. The reaction product is proposed to undergo a 6π-electron cyclization triggered by reductive activation of the quinone. The reaction process is proposed to be autocatalytic.     

Generalized dimension compression under mappings of exponentially integrable distortion

We prove a dimension compression estimate for homeomorphic mappings of exponentially integrable distortion via a modulus of continuity result by D. Herron and P. Koskela [Mappings of finite distortion: gauge dimension of generalized quasicircles, Illinois J. Math., 2003, 47(4), 1243–1259]. The essential sharpness of our estimate is demonstrated by an example.     

Silicon solar cells with Al2O3 antireflection coating

The paper presents the possibility of using Al₂O₃ antireflection coatings deposited by atomic layer deposition ALD. The ALD method is based on alternate pulsing of the precursor gases and vapors onto the substrate surface and then chemisorption or surface reaction of the precursors. The reactor is purged with an inert gas between the precursor pulses. The Al₂O₃ thin film in structure of the finished solar cells can play the role of both antireflection and passivation layer which will simplify the process. For this research 50×50 mm monocrystalline silicon solar cells with one bus bar have been used. The metallic contacts were prepared by screen printing method and Al₂O₃ antireflection coating by ALD method. Results and their analysis allow to conclude that the Al₂O₃ antireflection coating deposited by ALD has a significant impact on the optoelectronic properties of the silicon solar cell. For about 80 nm of Al₂O₃ the best results were obtained in the wavelength range of 400 to 800 nm reducing the reflection to less than 1%. The difference in the solar cells efficiency between with and without antireflection coating was 5.28%. The LBIC scan measurements may indicate a positive influence of the thin film Al₂O₃ on the bulk passivation of the silicon.     

Photoinduction of surface-relief gratings during all-optical poling of polymer films

Using the all-optical poling method, we observed the formation of a surface-relief grating (SRG) in an amorphous polymer film containing azo dye molecules in side chain positions. The experiment consists of a seeding-type process. We used a recently described experimental setup that permits a periodic nonlinear pattern to be produced by the index dispersion of glass. The particular configuration permits photoinduced translation diffusion of the azo chromophores to be observed as the origin of the SRG formation. Analyses of the gratings recorded by use of s (TE) and p (TM) polarization of the writing beams are conducted by atomic-force microscopy. The effect is attributed to mass transport from regions of high isomerization activity to regions of lower activity.     

A versatile wavelet domain noise filtration technique for medical imaging

In this paper, we propose a robust wavelet domain method for noise filtering in medical images. The proposed method adapts itself to various types of image noise as well as to the preference of the medical expert; a single parameter can be used to balance the preservation of (expert-dependent) relevant details against the degree of noise reduction. The algorithm exploits generally valid knowledge about the correlation of significant image features across the resolution scales to perform a preliminary coefficient classification. This preliminary coefficient classification is used to empirically estimate the statistical distributions of the coefficients that represent useful image features on the one hand and mainly noise on the other. The adaptation to the spatial context in the image is achieved by using a wavelet domain indicator of the local spatial activity. The proposed method is of low complexity, both in its implementation and execution time. The results demonstrate its usefulness for noise suppression in medical ultrasound and magnetic resonance imaging. In these applications, the proposed method clearly outperforms single-resolution spatially adaptive algorithms, in terms of quantitative performance measures as well as in terms of visual quality of the images.     

The Value of Pre- and Postnatal MRI Monitoring of Cytomegalovirus-Related Brain Lesions

Magnetic resonance imaging (MRI) abilities in pre- and postnatal monitoring of cytomegalovirus-related brain lesions from early prenatal period to infancy are described. Objective of our study is to illustrate the gradual evolution of intracranial abnormalities in a single patient through serial pre- and postnatal MRI. It demonstrates the progress of a cerebral cytomegalovirus infection from fetal to postnatal life with the lack of concordance between prenatal ultrasonography and MRI, and proves the great importance of MRI, being in most cases the only tool for early detection and monitoring of this potentially devastating entity. It was shown that the additional postnatal MRI increases the possibilities in the specific characterization of lesions revealed in the fetus brain, which account for a wide spectrum of different sequences and best spatial resolution of postnatal MRI in comparison with the prenatal one.     

Synthesis and characterization of pH sensitive poly(glycidol)‐b‐poly(4‐vinylpyridine) block copolymers

Block copolymers of poly(glycidol)‐b‐poly(4‐vinylpyridine) were obtained by ATRP of 4‐vinylpyridine initiated by ω‐(2‐chloropropionyl) poly(glycidol) macroinitiators. By changing the monomer/macroinitiator ratio in the synthesis polymers with varied P4VP/PGl molar ratio were obtained. The obtained block copolymers showed pH sensitive solubility. It was found that the linkage of a hydrophilic poly(glycidol) block to a P4VP influenced the pK_a value of P4VP. DLS measurements showed the formation of fully collapsed aggregates exceeding pH 4.7. Above this pH values the collapsed P4VP core of the aggregates was stabilized by a surrounding hydrophilic poly(glycidol) corona. The size of the aggregates depended significantly upon the composition of the block copolymers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1782–1794, 2009     

Evaluation of a Gelatin-Modified Poly(ε-Caprolactone) Film as a Scaffold for Lung Disease

Lung transplantation is a necessary step for the patients with the end stage of chronic obstructive pulmonary disease. The use of artificial lungs is a promising alternative to natural lung transplantation which is complicated and is restricted by low organ donations. For successful lung engineering, it is important to choose the correct combination of specific biological cells and a synthetic carrier polymer. The focus of this study was to investigate the interactions of human lung epithelial cell line NCl-H292 that is involved in lung tissue development with the biodegradable poly(ε-caprolactone) before and after its chemical modification to evaluate potential for use in artificial lung formation. Also, the effect of polymer chemical modification on its mechanical and surface properties has been investigated. The poly(ε-caprolactone) surface was modified using aminolysis followed by immobilization of gelatin. The unmodified and modified polymer surfaces were characterized for roughness, tensile strength, and NCl-H292 metabolic cell activity. The results showed for the first time the possibility for NCI-H292 cells to adhere on this polymeric material. The resazurin assay showed that the metabolic activity at 24?h postseeding of 80% in the presence of the unmodified and greater than 100% in the presence of the modified polymer was observed. The roughness of the poly(ε-caprolactone) increased from 4 to 26?nm and the film strength increased from 0.01 to 0.045 kN when the material was chemically modified. The results obtained to date show potential for using modified poly(ε-caprolactone) as a scaffold for lung tissue engineering.     

Temperature-sensitive behaviour of poly(glycidol)-b-poly(N-isopropylacrylamide) block copolymers

Temperature-sensitive poly(glycidol)-b-poly(N-isopropylacrylamide) block copolymers (PGl₅₅PNIPAAm_y) were synthesised and their aqueous solutions investigated by different methods including differential scanning calorimetry (DSC), UV-VIS spectroscopy as well as dynamic and static light scattering. The cloud point temperature (T _c) depended on the composition of the investigated block copolymers and increased with decreasing length of the PNIPAAm block in PGl₅₅PNIPAAm_y copolymers. In contrast, the enthalpy of phase separation of PNIPAAm segments measured by DSC decreased with decreasing length of the PNIPAAm block in the polymer. These findings can be correlated with the behaviour of homo-PNIPAAm with similar molecular weights indicating that the influence of PGl on the local environment and phase separation of PNIPAAm chains is similar to the influence observed for PNIPAAm chains bearing different low molecular weight end group. Using DLS measurement, it was shown that the aggregation process depended on the PGl/PNIPAAm block ratio. If the PGl/PNIPAAm ratio was low, stable core-shell aggregates were formed. In contrast, the tendency to formation of large unstable, loose aggregates was observed for copolymers with high PGl/PNIPAAm ratio.     

Efficient chromatography-free synthesis of the oxy-analogue of fingolimod

Fingolimod (FTY720) and its analogue derivatives are not only promising therapeutics in sphingolipid signaling but also valuable tools for understanding the roles of sphingolipids in (patho)physiological conditions. A practical method for the synthesis of the ether analogue of FTY720 is described. Our final synthetic approach allows high yield and efficient synthesis of O-FTY in only four steps without chromatographic purifications.