Physisorption and Chemisorption on Silver Clusters

Adsorption and coadsorption studies on free silver clusters show that nitrogen physisorbs like rare gases, whereas oxygen chemisorbs with similarities and differences to bulk silver surfaces. Silver nanoparticles activate, or even dissociate adsorbed oxygen molecules. The global electron configurations of the adsorbent and adsorbate dominate the stability at small clusters. This is more important than geometry and site effects. Due to electronic shell effects and electron pairing, the activation of oxygen strongly varies with size. At more than 40 free electrons in the complex, such quantum effects start to blur. The size dependence becomes smoother and general trends govern the reactivity, which is driven by the interaction between the charge state of the nanoparticle and the charge transfer of the reaction.     

Tradition- and science-based quality control of Chinese medicines--introducing the Phyto-True system

The current QC practice of quantifying presumed active chemicals or arbitrarily selected chemical markers is of doubtful value in assessing multicomponent complex traditional Chinese medicines (CMs) and often leads to an inconsistent or irreproducible research and clinical outcome. Consequently, the first and most important step in the QC of CMs (or other botanical medicines) whose exact active chemical components are unknown is to use analytical techniques that can comprehensively define the totality of the components/attributes making up their identity and quality. One of the most versatile techniques is HPTLC. Using HPTLC, along with other simple techniques such as FTIR spectroscopy and UV-Vis spectroscopy combined with complementary gene expression profiling, we have been able to correctly identify CM materials, detect adulterants, and differentiate closely related materials and botanical species. Our research has resulted in the introduction of the concept and specimens of Phyto-True Reference Material (PTRM), aka Representative Botanical Reference/Research Material (RBRM), now commercially available, and a novel patent-pending technology (Phyto-True system) that can serve as a starting point for the meaningful QC of traditional CMs so far not possible for these complex materials. Examples will be highlighted to demonstrate this new concept.     

Excited state dynamics of metastable phthalocyanine-tetrasulfonate tetra-anions probed by pump/probe photoelectron spectroscopy

Femtosecond time-resolved pump-probe photoelectron spectroscopy was used to study elementary relaxation processes occurring in isolated phthalocyanine-tetrasulfonate tetra-anions ([MPc(SO3)4]4-, M=Cu,Ni, and "free-base" [H2Pc(SO3)4]4-) following Q band excitation by one-photon absorption at 775 nm. Whereas the Cu and Ni systems decay rapidly by means of internal conversion without electron loss, the free-base phthalocyanine primarily undergoes excited state tunneling electron emission. This reflects less efficient coupling to lower lying states within the corresponding spin manifold. Results are interpreted in terms of (time-dependent) density functional theory calculations of ground and electronically excited states and kinetically modeled to yield the associated rates.     

Photodissociation dynamics of gaseous CpCo(CO)2 and ligand exchange reactions of CpCoH2 with C3H4, C3H6, and NH3

The photodissociation dynamics of CpCo(CO)(2) was studied in a molecular beam using photofragment translational energy spectroscopy with 157 nm photoionization detection of the metallic products. At 532 and 355 nm excitation, the dominant one-photon channel involved loss of a single CO ligand producing CpCoCO. The product angular distributions were isotropic, and a large fraction of excess energy appeared as product vibrational excitation. Production of CpCO + 2CO resulted from two-photon absorption processes. The two-photon dissociation of mixtures containing CpCo(CO)(2) and H(2) at the orifice of a pulsed nozzle was used to produce a novel 16-electron unsaturated species, CpCoH(2). Transition metal ligand exchange reactions, CpCoH(2) + L → CpCoL + H(2) (L = propyne, propene, or ammonia), were studied under single-collision conditions for the first time. In all cases, ligand exchange occurred via 18-electron association complexes with lifetimes comparable to their rotational periods. Although ligand exchange reactions were not detected from CpCoH(2) collisions with methane or propane (L = CH(4) or C(3)H(8)), a molecular beam containing CpCoCH(4) was produced by photolysis of mixtures containing CpCo(CO)(2) and CH(4).     

Degenerate molecular shuttles with flexible and rigid spacers

The preparation and dynamic behavior of degenerate rotaxane molecular shuttles are described in which a benzylic amide macrocycle moves back and forth between two naphthalimide-glycine units along a diphenylethyne spacer or an aliphatic spacer consisting of a C(9), C(12), or C(26) alkyl chain. Subtle differences in the (1)H NMR spectra of the rotaxanes can be related to the presence of conformers in which the macrocycle interacts simultaneously with both glycines, especially in the case of the C(9) spacer. The kinetic data of the shuttling behavior in the C(26) rotaxane were obtained from dynamic NMR spectroscopy. The Eyring activation parameters were found to be ΔH(?) = 10 ± 1 kcal mol(-1), ΔS(?) = -6.5 ± 2.0 cal mol(-1) K(-1), ΔG(?)(298) = 11.9 ± 0.2 kcal mol(-1). For the systems with the shorter spacers, the shuttling rates were higher. Also in the diphenylethyne, rotaxane shuttling is rapid on the NMR time scale, indicating that the rigid unit does not impose a large barrier to the translocation of the macrocycle.     

Quantitative Analysis of Long Chain Fatty Acids Present in a Type I Kerogen Using Electrospray Ionization Fourier Transform Ion Cyclotron Resonance Mass Spectrometry: Compared with BF3/MeOH Methylation/GC-FID

Long chain fatty acids (LCFAs) are present in various natural samples and are easily detectable using electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry (ESI-FT-ICR-MS) in negative ion mode. The capability of the ESI-FT-ICR-MS for quantifying LCFAs was evaluated by performing a standard addition followed by an internal standard methodology to several kerogen extracts using n-C₂₀ fatty acid as standard. As the concentration of the standard increased, the magnitude of its peak (m/z 311.29525) increased linearly but with two separate slopes, leaving the entire mass spectra relatively unchanged, which shows evidence of reproducibility. Response factors of other LCFAs are obtained using a standard addition approach. We employed five LCFA standards (n-C₁₅, n-C₁₉, n-C₂₄, n-C₂₆, and n-C₃₀) with different carbon numbers. This allowed us to determine the response factor of all fatty acids (with carbon number between 15 and 30) by plotting the slope of each standard versus its carbon number. With the observed response factors and use of the internal standard, the concentrations of LCFAs in four kerogen extracts were measured by ESI-FT-ICR-MS and compared with those from GC-FID. The carbon number distribution obtained by ESI-FT-ICR-MS matched well the GC-FID distribution (5%–50%) with the exception of C₁₆ and C₁₈, considering that ESI-FT-ICR-MS does not differentiate between normal and branched LCFAs, whereas GC-FID does. This allows one to quantitatively compare samples with a relatively similar matrix for specific compounds such as LCFAs with no need of time-consuming derivatization procedures. Moreover, the calibration can be extended to higher carbon numbers with ESI-FT-ICR-MS, beyond the capabilities of GC/MS.

Localized and Collective Motions in HET‐s(218‐289) Fibrils from Combined NMR Relaxation and MD Simulation

Nuclear magnetic resonance (NMR) relaxation data and molecular dynamics (MD) simulations are combined to characterize the dynamics of the fungal prion HET‐s(218‐289) in its amyloid form. NMR data is analyzed with the dynamics detector method, which yields timescale‐specific information. An analogous analysis is performed on MD trajectories. Because specific MD predictions can be verified as agreeing with the NMR data, MD was used for further interpretation of NMR results: for the different timescales, cross‐correlation coefficients were derived to quantify the correlation of the motion between different residues. Short timescales are the result of very local motions, while longer timescales are found for longer‐range correlated motion. Similar trends on ns‐ and μs‐timescales suggest that μs motion in fibrils is the result of motion correlated over many fibril layers.     

Ratiometric fluorescent Zn chemosensor constructed by appending a pair of carboxamidoquinoline on 1,2-diaminocyclohexane scaffold

By appending a pair of carboxamidoquinoline pendants onto 1,2-diaminocyclohexane scaffold via N-alkylation, multifunctionalized ACAQ was designed and synthesized as a water soluble fluorescent ratiometric chemosensor for Zn²⁺. In 50% aqueous methanol buffer pH 7.4 solution, upon excitation at 316 nm, ACAQ (5 μM) displayed a selective ratiometric fluorescence changes with a shift from 410 to 490 nm in response to the interaction with Zn²⁺. After binding with 1 equiv of Zn²⁺, ACAQ exhibited a 12-fold enhancement in I₄₉₀/I₄₁₀ characterized by a clear isoemissive point at 440 nm. The metal sensor binding mode was established by Job’s plot and the combined fluorescence and ¹H NMR spectroscopic method. The selectivity of the probe toward biological relevant cations and transition metal ions was proven to be good. In addition, the interference caused by Cu²⁺ and Cd²⁺ in the quantitation of Zn²⁺ can be completely eliminated by the use of diethyldithiocarbamate as the screening agent. Exploitation of ACAQ as the sensing probe, ratiometric determination of Zn²⁺ with the limit of detection (LOD) at 28.3 nm can be realized. In addition, the unique responsive properties of the probe toward Fe³⁺ and Zn²⁺ were used to construct a fluorescent switch. The membrane permeability of ACAQ to living cells and bio-imaging of Zn²⁺ were demonstrated.     

Several convenient methods for the synthesis of 2-amido substituted furans

Several new methods for the synthesis of differently substituted 2-amidofurans are described. The thermolysis of furan-2-carbonyl azide results in a Curtius rearrangement and the resulting furanyl isocyanate was trapped with various organometallic reagents. A second method consists of a C-N cross-coupling reaction of a bromo-substituted furan with various amides, carbamates, and lactams. The CuI-catalyzed cross-coupling reaction between furanyl bromides and amides furnished 2- and 3-substituted amidofurans in 45-95% yield. The third protocol used involves the reaction of cyclic carbinol amides with triflic anhydride. The reaction proceeds under very mild conditions to provide alpha-(trifluoromethyl)sulfonamido-substituted furans in high yield. The resulting iminium ion derived from the reaction of the hydroxy pyrrolidinone with Tf(2)O undergoes a facile ring opening as a consequence of the adjacent hydroxyl group to produce an imino triflate intermediate. Subsequent cyclization of this highly electrophilic imine with the oxygen atom of the adjacent carbonyl group leads to an imino dihydrofuran that reacts further with another equivalent of Tf(2)O to give the observed product.     

Increasing the solubility of strong reducing agents containing Mo(2)(4+) units and alkyl-substituted guanidinate ligands

Six very soluble paddlewheel compounds containing Mo(2)(n+) units, n = 4, 5, 6, and two alkyl-substituted bicyclic guanidinate ligands have been synthesized. The quadruply bonded complexes with n = 4, Mo(2)(TMhpp)(4) and Mo(2)(TEhpp)(4), (TMhpp = the anion of 3,3,9,9-tetramethyl-1,5,7-triazabicyclo[4.4.0]dec-4-ene and TEhpp = the anion of 3,3,9,9-tetraethyl-1,5,7-triazabicyclo[4.4.0]dec-4-ene) are easily oxidized. The electrode potentials in THF are -1.08 and -1.17 V vs. Ag/AgCl, respectively, for the Mo(2)(5+/4+) couple. These potentials are in accord with the low ionization potentials for the quadruply bonded compounds. Because of the high solubility of the Mo(2)(4+) compounds in most common organic solvents they are attractive candidates for use as strong reducing agents in homogeneous systems.