Optimizing TiO(2) Nanotube Top Geometry for Use in Dye-Sensitized Solar Cells

Recombination dynamics: For TiO(2) nanotube-based dye-sensitized solar cells, the efficiency can be drastically enhanced by a synergetic effect that occurs when using nanowire-ended nanotubes in combination with an adequate nanoparticle decoration.     

Variation in the biomolecular interactions of nickel(II) hydrazone complexes upon tuning the hydrazide fragment

Three new bivalent nickel hydrazone complexes have been synthesised from the reactions of [NiCl(2)(PPh(3))(2)] with H(2)L {L = dianion of the hydrazones derived from the condensation of o-hydroxynaphthaldehyde with furoic acid hydrazide (H(2)L(1)) (1)/thiophene-2-acid hydrazide (H(2)L(2)) (2)/isonicotinic acid hydrazide (H(2)L(3)) (3)} and formulated as [Ni(L(1))(PPh(3))] (4), [Ni(L(2))(PPh(3))] (5) and [Ni(L(3))(PPh(3))] (6). Structural characterization of these compounds 4-6 were accomplished by using various physico-chemical techniques. Single crystal X-ray diffraction data of complexes 4 and 5 proved their distorted square planar geometry. In order to ascertain the potential of the above synthesised compounds towards biomolecular interactions, additional experiments involving interaction with calf thymus DNA (CT DNA) and bovine serum albumin (BSA) were carried out. All the ligands and corresponding nickel(ii) chelates have been screened for their scavenging effect towards O(2)(-), OH and NO radicals. The efficiency of complexes 4-6 to arrest the growth of HeLa, HepG-2 and A431 tumour cell lines has been studied along with the cell viability test against the non-cancerous NIH 3T3 cells under in vitro conditions.     

Copper(I) and nickel(II) complexes with 1:1 vs. 1:2 coordination of ferrocenyl hydrazone ligands: do the geometry and composition of complexes affect DNA binding/cleavage, protein binding, antioxidant and cytotoxic activities?

A new series of geometrically different complexes containing ferrocenyl hydrazone ligands were synthesised by reacting suitable precursor complex [MCl(2)(PPh(3))(2)] with the ligands HL(1) or HL(2) (where M = Cu(II) or Ni(II); HL(1) = [Cp(2)Fe(CH=N-NH-CO-C(6)H(5))] (1) and HL(2) = [Cp(2)Fe(CH=N-NH-CO-C(5)H(4)N)]) (2). The new complexes of the composition [Cu(L(1))(PPh(3))(2)], (3) [Cu(L(2))(PPh(3))(2)] (4), [Ni(L(1))(2)] (5) and [Ni(L(2))(2)] (6) were characterised by various spectral studies. Among them, complexes 3 and 5 characterised by single crystal X-ray diffraction showed a distorted tetrahedral structure for the former with 1:1 metal-ligand stoichiometry, but a distorted square planar geometry with 1:2 metal-ligand stoichiometry in the case of the latter. Systematic biological investigations like DNA binding, DNA cleavage, protein binding, free radical scavenging and cytotoxicity activities were carried out using all the synthesised compounds and the results obtained were explained on the basis of structure-activity relationships. The binding constant (K(b)) values of the synthesised compounds are found to be in the order of magnitude 10(3)-10(5) M(-1) and also they exhibit significant cleavage of supercoiled (SC) pUC19 DNA in the presence of H(2)O(2) as co-oxidant. The conformational changes of bovine serum albumin (BSA) upon binding with the above complexes were also studied. In addition, concentration dependent free radical scavenging potential of all the synthesised compounds (1-6) was also carried out under in vitro conditions. Assays on the cytotoxicity of the above complexes against HeLa and A431 tumor cells and NIH 3T3 normal cells were also carried out.     

Solid-state nuclear magnetic resonance studies delineate the role of the protein in activation of both aromatic rings of thiamin

Knowledge of the state of ionization and tautomerization of heteroaromatic cofactors when enzyme-bound is essential for formulating a detailed stepwise mechanism via proton transfers, the most commonly observed contribution to enzyme catalysis. In the bifunctional coenzyme, thiamin diphosphate (ThDP), both aromatic rings participate in catalysis, the thiazolium ring as an electrophilic covalent catalyst and the 4'-aminopyrimidine as acid-base catalyst involving its 1',4'-iminopyrimidine tautomeric form. Two of four ionization and tautomeric states of ThDP are well characterized via circular dichroism spectral signatures on several ThDP superfamily members. Yet, the method is incapable of providing information about specific proton locations, which in principle may be accessible via NMR studies. To determine the precise ionization/tautomerization states of ThDP during various stages of the catalytic cycle, we report the first application of solid-state NMR spectroscopy to ThDP enzymes, whose large mass (160,000-250,000 Da) precludes solution NMR approaches. Three de novo synthesized analogues, [C2,C6'-(13)C(2)]ThDP, [C2-(13)C]ThDP, and [N4'-(15)N]ThDP used with three enzymes revealed that (a) binding to the enzymes activates both the 4'-aminopyrimidine (via pK(a) elevation) and the thiazolium rings (pK(a) suppression); (b) detection of a pre-decarboxylation intermediate analogue using [C2,C6'-(13)C(2)]ThDP, enables both confirmation of covalent bond formation and response in 4'-aminopyrimidine ring's tautomeric state to intermediate formation, supporting the mechanism we postulate; and (c) the chemical shift of bound [N4'-(15)N]ThDP provides plausible models for the participation of the 1',4'-iminopyrimidine tautomer in the mechanism. Unprecedented detail is achieved about proton positions on this bifunctional coenzyme on large enzymes in their active states.     

DFT studies of squarylium and core‐substituted squarylium dye derivatives: understanding the causes of the additional shorter wavelength absorption in the latter

Recent reports indicate that the core‐substituted squarylium (CSQ) dyes (obtained when one oxygen atom of the SQ moiety is replaced by an electron withdrawing group or sulfur) show bathochromic shift of the absorption maxima and an additional shorter wave length absorption in visible when compared to parent SQ dyes. To investigate this interesting property of these dyes which will be more suitable for applications in DSSC, a comparative study using computational techniques of some selected SQ and CSQ derivatives has been carried out. The effect of this core substitution on geometries is studied. The ground state charge distribution is analyzed by natural population analysis. It is noticed that the biradical character, which is normally large in SQ derivatives, is reduced in CSQ due to the substitution and the zwitterionic character is increased. The absorption maxima for both parent SQ and CSQ dyes obtained with TD‐DFT methods using various functional like B3LYP, M06‐2X and CAM‐B3LYP methods do not match the experimental results. However, results obtained using SAC‐CI method are better. Charge transfer (CT) data based on Mulliken charges of both ground and excited states is obtained from SAC/SAC‐CI studies. It is seen that on excitation substantial CT from the side groups to the central core is taking place in parent SQ molecules. In contrast, intense CT occurs from –X to side groups through central core in the case of CSQ molecules. This study will be helpful in designing and synthesizing new CSQ dyes which makes them suitable for solar cell applications. Copyright © 2012 John Wiley & Sons, Ltd.     

Dissipation behavior of phorate and its toxic metabolites in the sandy clay loam soil of a tropical sugarcane ecosystem using a single‐step sample preparation method and GC–MS

The dissipation of phorate in the sandy clay loam soil of tropical sugarcane ecosystem was studied by employing a single‐step sample preparation method and gas chromatography with mass spectrometry. The limit of quantification of the method was 0.01 μg/g. The recoveries of phorate, phorate sulfoxide, phorate sulfone, and phorate oxon were in the range 94.00–98.46% with relative standard deviations of 1.51–3.56% at three levels of fortification between 0.01 and 0.1 μg/g. The Half‐life of phorate and the total residues, which include phorate, phorate sulfoxide and phorate sulfone, was 5.5 and 19.8 days, respectively at the recommended dose of insecticide. Phorate rapidly oxidized into its sulfoxide metabolite in the sandy clay loam soil. Phorate sulfoxide alone accounted for more than 20% of the total residues within 2 h post‐application and it was more than 50% on the fifth day after treatment irrespective of the doses applied. Phorate sulfoxide and phorate sulfone reached below the detectable level on 105 and 135 days after treatment, respectively as against 45 days after treatment for phorate residues at the recommended dose. Thus, the reasonably prolonged efficacy of phorate against soil pests may be attributed to longer persistence of its more toxic sulfoxide and sulfone metabolites.     

Determination of 77 Multiclass Pesticides and Their Metabolitesin Capsicum and Tomato Using GC-MS/MS and LC-MS/MS

A quick, sensitive, and reproducible analytical method for the determination of 77 multiclass pesticides and their metabolites in Capsicum and tomato by gas and liquid chromatography tandem mass spectrometry was standardized and validated. The limit of detection of 0.19 to 10.91 and limit of quantification of 0.63 to 36.34 µg·kg⁻¹ for Capsicum and 0.10 to 9.55 µg·kg⁻¹ (LOD) and 0.35 to 33.43 µg·kg⁻¹ (LOQ) for tomato. The method involves extraction of sample with acetonitrile, purification by dispersive solid phase extraction using primary secondary amine and graphitized carbon black. The recoveries of all pesticides were in the range of 75 to 110% with a relative standard deviation of less than 20%. Similarly, the method precision was evaluated interms of repeatability (RSDr) and reproducibility (RSD_wR) by spiking of mixed pesticides standards at 100 µg·kg⁻¹ recorded anRSD of less than 20%. The matrix effect was acceptable and no significant variation was observed in both the matrices except for few pesticides. The estimated measurement uncertainty found acceptable for all the pesticides. This method found suitable for analysis of vegetable samples drawn from market and farm gates.     

Dielectric and conduction mechanism studies of Ni doped LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> synthesized by solution combustion method

In the present work, structural, morphological, dielectrical, and electrochemical properties of LiNi_xMn_(2-x)O₄ (where x?=?0, 0.1,0.3, 0.5 mol%) prepared by solution combustion method were reported. X-ray diffraction studies confirmed the formation of cubic spinel structure without any impurity phases. Scanning electron micrographs revealed grains of micrometer range with a spherical like morphology and narrow size distribution. Dielectric parameters such as dielectric constant, dielectric loss, impedance, and electrical modulus were found to depend on temperature, frequency, and dopant concentration. AC conductivity was found to increase with increase in temperature exhibiting negative temperature co-efficient of resistance (NTCR) property in the material. Complex impedance and electrical modulus studies revealed the existence of temperature-dependent electrical relaxation in the material. The Correlated Barrier Hopping (CBH) model of conduction mechanism was confirmed by the decrease in s parameter with increase in temperature. Charge-discharge studies revealed the stabilization of spinel lattice by Ni ions, contributing to better capacity retention.     

Neighbouring carbonyl group-assisted sequential 1,2-azide and1,4-oxygen migrations of vinyl azides leading to α-azido ketones

The development of azide migration reactions is a formidable challenge due to potential competition from side processes driven by the release of molecular nitrogen. Here, we show a novel neighbouring carbonyl group-assisted sequential 1,2-azide and 1,4-oxygen migration reaction of α-vinyl azides for the efficient preparation of a range of α-azido ketones. This represents the first transformation of α-vinyl azides into α-azido ketones. Notable features of this method are its high efficiency, broad substrate scope, excellent functional group compatibility, and high yields. The computational studies gave a key insights into the regioselective 1,2-azide and 1,4-oxygen migrations assisted by the neighbouring carbonyl group. Further conversions into a variety of nitrogen-containing compounds demonstrated the synthetic utility of the α-azido ketone products. Preliminary mechanistic studies disclosed a novel reaction mechanism involving neighbouring carbonyl group-assisted sequential 1,2-azide and1,4-oxygen migrations.     

Identification and determination of naturally occurring folates in grains of rice (Oryza sativa L.) by UPLC-MS/MS analysis

The genetic potential and biofortification of India-grown rice with bioavailable folate has not been studied yet. The objectives of this study were to determine the folates concentration in four cultivars of rice through UPLC–MS/MS. Total folate concentration in rice cultivars ranged from 11.0 to 51 μg/100 g with a mean of 26.0 μg/100 g. Among the four rice cultivars, the pigmented grain cultivar Nootripathu possesses two-fold rich sources of total folates than the other three non-pigmented grain cultivars. The average value of 100 g serving of rice grains could provide the amount of recommended daily allowance (% RDA) of dietary folates (6.5%) for adults, which ranged from 2.7–12.7%. Among the 5 individual forms of folates, 5-methyltetrahydrofolate was most abundant in rice cultivars followed by 10-Formylfolic acid and folic acid. The result of this study has been useful for biofortification of folates in rice.