Effect of bioparticle size on dispersion and retention in monolithic and perfusive beds

Single-component pulse response studies were used to compare the retention and transport behavior of small molecules, proteins, and a virus on commercially available monolithic and perfusive ion-exchangers. Temporal distortion and extra-column effects were corrected for using a simple algorithm based on the method of moments. It was found that temporal distortion is inversely related to the number of theoretical plates. With increasing bioparticle size, retention increased and the transition from a non-eluting to a non-adsorbing state with increasing ionic strength became more abrupt. Both of these observations are qualitatively explained by calculations of particle-surface electrostatic attractive energy. Calculations also suggest that, for sufficiently large bioparticles, such as viruses or cells, hydrodynamic drag can promote elution. Under non-adsorbing conditions, plate height increased only weakly with flow rate and the skew remained unchanged. With increasing retention, plate height increased dramatically for proteins. Plate height was scaled by permeability rather than bead diameter to enable comparison among different stationary phases.     

New three-dimensional inorganic frameworks based on the uranophane-type sheet in monoamine templated uranyl-vanadates

Seven new uranyl vanadates with mono-protonated amine or tetramethylammonium used as structure directing cations, (C₂NH₈)₂{[(UO₂)(H₂O)][(UO₂)(VO₄)]₄}·H₂O (DMetU5V4) (C₂NH₈){[(UO₂)(H₂O)₂][(UO₂)(VO₄)]₃}·H₂O (DMetU4V3), (C₅NH₆)₂{[(UO₂)(H₂O)][(UO₂)(VO₄)]₄}·H₂O (PyrU5V4), (C₃NH₁₀){[(UO₂)(H₂O)₂][(UO₂)(VO₄)]₃}·H₂O (isoPrU4V3), (N(CH₃)₄){[(UO₂)(H₂O)₂][(UO₂)(VO₄)]₃}·H₂O (TMetU4V3), (C₆NH₁₄){[(UO₂)(H₂O)₂][(UO₂)(VO₄)]₃}·H₂O (CHexU4V3), and (C₄NH₁₂){[(UO₂)(H₂O)][(UO₂)(VO₄)]₃} (TButU4V3) were prepared from mild-hydrothermal reactions using dimethylamine, pyridine, isopropylamine, tetramethylammonium hydroxide, cyclohexylamine and tertiobutylamine, respectively, with uranyl nitrate and vanadium oxide in acidic medium. The structures were solved using single-crystal X-ray diffraction data. The compounds exhibit three-dimensional uranyl-vanadate inorganic frameworks built from uranophane-type uranyl-vanadate layers pillared by uranyl polyhedra with cavities in between occupied by protonated organic moieties. In the uranyl-vanadate layers the orientations of the vanadate tetrahedra give new geometrical isomers leading to unprecedented pillared systems and new inorganic frameworks with U/V=4/3. Crystallographic data: (DMetU5V4) orthorhombic, Cmc2₁ space group, a=15.6276(4), b=14.1341(4), c=13.6040(4) Å; (DMetU4V3) monoclinic, P2₁/n space group, a=10.2312(4), b=13.5661(7), c=17.5291(7) Å, β=96.966(2); (PyrU5V4), triclinic, P1 space group, a=9.6981(3), b=9.9966(2), c=10.5523(2) Å, α=117.194(1), β=113.551(1), γ=92.216(1)°; (isoPrU4V3) monoclinic, P2₁/n space group, a=10.3507(1), b=13.6500(2), c=17.3035(2) Å, β=97.551(1)°; (TMetU4V3) orthorhombic, Pbca space group, a=17.1819(2), b=13.6931(1), c=21.4826(2) Å; (CHexU4V3), triclinic P−1 space group, a=9.8273(6), b=11.0294(7), c=12.7506(8) Å, α=98.461(3), β=96.437(3), γ=105.955(3)°; (TButU4V3), monoclinic, P2₁/m space group, a=9.8048(4), b=17.4567(8), c=15.4820(6) Å, β=106.103(2).     

Lateral cavity acoustic transducer as an on-chip cell/particle microfluidic switch

A novel on-chip microfluidic switch is demonstrated that utilizes the acoustic microstreaming generated by an oscillating air-liquid interface to switch cells/particles into bifurcating microchannels. The air-liquid interface of the Lateral Cavity Acoustic Transducers (LCATs) can be actuated by an external acoustic energy source causing the interface to oscillate. The oscillating interface results in the generation of vortex-like microstreaming flow within a localized region of the surrounding liquid. This streaming was utilized here to deflect cells/particles into a collection outlet. It was demonstrated that the switching zone could be controlled by varying the actuation time of the LCAT. An LCAT based microfluidic switch is capable of achieving theoretical switching rates of 800 cells/particles per second. It was also demonstrated that K562 cells could be switched into a collection channel with cell viability comparable to that of controls as determined by Trypan blue exclusion assay.     

Microfluidic droplet sorting with a high frequency ultrasound beam

This paper presents experimental results demonstrating the feasibility of high frequency ultrasonic sensing and sorting for screening single oleic acid (lipid or oil) droplets under continuous flow in a microfluidic channel. In these experiments, hydrodynamically focused lipid droplets of two different diameters (50 μm and 100 μm) are centered along the middle of the channel, which is filled with deionized (DI) water. A 30 MHz lithium niobate (LiNbO(3)) transducer, placed outside the channel, first transmits short sensing pulses to non-invasively determine the acoustic scattering properties of the individual droplets passing through the beam's focus. Integrated backscatter (IB) coefficients, utilized as a sorting criterion, are measured by analyzing the received echo signals from each droplet. When the IB values corresponding to 100 μm droplets are obtained, a custom-built LabVIEW panel commands the transducer to emit sinusoidal burst signals to commence the sorting operation. The number of droplets tested for the sorting is 139 for 50 μm droplets and 95 for 100 μm droplets. The sensing efficiencies are estimated to be 98.6% and 99.0%, respectively. The sorting is carried out by applying acoustic radiation forces to 100 μm droplets to direct them towards the upper sheath flow, thus separating them from the centered droplet flow. The sorting efficiencies are 99.3% for 50 μm droplets and 85.3% for 100 μm droplets. The results suggest that this proposed technique has the potential to be further developed into a cost-effective and efficient cell/microparticle sorting instrument.     

Hydro-ionothermal syntheses, crystal structures, and properties of five new divalent metal iminophosphonates

The use of a moderately hydrophobic ionic liquid, 1-butyl-2,3-dimethylimidazolium tetrafluoroborate ([BdMIM][BF(4)]), as a cosolvent with water, has been investigated in the synthesis of metal phosphonates. This hydro-ionothermal synthesis has been carried out through a systematic combinatorial investigation of several divalent metal chlorides and two related ligands, iminobis(methylphosphonic acid) and N-methyliminiobis(methylphosphonic acid). These reactions resulted in five new divalent metal phosphonates. We present here the synthetic techniques utilized as well as the X-ray structures and characteristic properties of each of these compounds. Co(HO(3)PCH(2)NH(2)CH(2)PO(3)H)(2), (1), consists of sheets that are hydrogen bonded together by pairs of P-O···H groups. Co(H(2)O)(2)(HO(3)PCH(2)NH(2)CH(2)PO(3)H)(2), (2), consists of chains that are connected through an extensive network of hydrogen bonds. Co(HO(3)PCH(2)NH(CH(3))CH(2)PO(3)H)(2), (3), is made up of sheets that are hydrogen bonded together by pairing P-O···H interactions. Zn(3)(O(3)PCH(2)NH(2)CH(2)PO(3))(2), (4), is isostructural to a previously reported cobalt compound which is a non-porous 3-dimensional network. CuClPO(3)CH(2)NH(2)CH(3), (5), formed as a result of an in situ N-C bond cleavage. Ladders built of Cu-O-P-O 8-membered rings are crosslinked by bridging chloride atoms to form sheets. 1, 3, 4 and 5 have been synthesized using the hydrophobic ionic liquid 1-butyl-2,3-dimethylimidazolium tetrafluoroborate ([BdMIM][BF(4)]) with water as a cosolvent, while 2 has been synthesized from identical conditions in the absence of the [BdMIM][BF(4)]. We also report the microwave assisted hydro-ionothermal synthesis of the known polymorph of 2, Co(H(2)O)(2)(HO(3)PCH(2)NH(2)CH(2)PO(3)H)(2), (6), synthesized in two hours providing high quality crystals in good yield. The compounds have been characterized by thermogravimetric analysis and IR spectroscopy, and their magnetic properties have been investigated.     

Reactions of Organic Ions at Ambient Surfaces in a Solvent-Free Environment

Solvent-free ion/surface chemistry is studied at atmospheric pressure, specifically pyrylium cations, are reacted at ambient surfaces with organic amines to generate pyridinium ions. The dry reagent ions were generated by electrospraying a solution of the organic salt and passing the resulting electrosprayed droplets pneumatically through a heated metal drying tube. The dry ions were then passed through an electric field in air to separate the cations from anions and direct the cations onto a gold substrate coated with an amine. This nontraditional way of manipulating polyatomic ions has provided new chemical insights, for example, the surface reaction involving dry isolated 2,4,6-triphenylpyrylium cations and condensed solid-phase ethanolamine was found to produce the expected N-substituted pyridinium product ion via a pseudobase intermediate in a regiospecific fashion. In solution however, ethanolamine was observed to react through its N-centered and O-centered nucleophilic groups to generate two isomeric products via 2H-pyran intermediates. The O-centered nucleophile reacted less rapidly to give the minor product. The surface reaction product was characterized in situ by surface enhanced Raman spectroscopy, and ex situ using mass spectrometry and H/D exchange, and found to be chemically the same as the major pyridinium solution-phase reaction product.     

Observing Lense-Thirring precession in tidal disruption flares

When a star is tidally disrupted by a supermassive black hole (SMBH), the streams of liberated gas form an accretion disk after their return to pericenter. We demonstrate that Lense-Thirring precession in the spacetime around a rotating SMBH can produce significant time evolution of the disk angular momentum vector, due to both the periodic precession of the disk and the nonperiodic, differential precession of the bound debris streams. Jet precession and periodic modulation of disk luminosity are possible consequences. The persistence of the jetted x-ray emission in the Swift J164449.3+573451 flare suggests that the jet axis was aligned with the spin axis of the SMBH during this event.