Capacitor coupled converter (C3) for high power DCconversion

The bang-bang controlled capacitor coupled converter (C³) is described in this paper. Due to the converter's inherent commutating property, the C³ can accommodate thyristors as well as high-power gate turn-off switches, due to zero-current switching transitions. The zero-current switching is achieved at no current stress increase, therefore, the topology is considered appropriate for high-power processing. DC and small signal AC models are derived for the bang-bang controlled C³, a design procedure is proposed, and simulation results are discussed. Finally, oscillograms from a proof of principle prototype circuit are presented     

Information-theoretic distortion measures for speech recognition

A wide variety of speech recognition distortion measures have been proposed and tested, including some especially effective ones. It is shown that there is a general framework, based on the concepts of information theory, linking most of these measures. The distortion measure between any two speech spectra can be defined in terms of the distortions between the associated probability distributions. This general framework defines three broad families of distortion measures for speech recognition and provides a consistent way of combining the energy and the spectral information of a phonetic event. In addition, the cepstral-domain representation for several distortion measures is derived, allowing comparison of these measures in a domain that also yields convenient equations for their practical implementation     

Ferroelectric polarization switching in nylon-11

Cold-drawn Nylon-11 films, which were prepared by stretching the melt-quenched films to a draw ratio of 2.8: 1 at room temperature, were found to exhibit an electric displacement versus electric field hysteresis loop. The results confirmed that the Nylon-11 film exhibited ferroelectric behavior at or below room temperature. The coercive fields were 65, 98, 125, 160, and 215 MV/m at 20, 0, ?20, ?40, and ?60°C and the remanent polarization at ?20°C (where there was considerably less dc conduction) was 56 mC/m². Switching of the polarization was almost completed within 20 ms.     

Performance of asynchronous DS-CDMA using a maximal ratio combiningdiversity over a Rician fading channel

The final closed-form expression for bit error probability (BEP) is presented for a DS-CDMA system using a maximal ratio combining (MRC) diversity over a Rician fading channel. The accuracy of the BEP estimate evaluated by this expression is verified by comparison with a semi-analytic simulation result. The effect that diversity order has on the BEP is also considered for typical multipath delay profiles with different Rician ratios     

The role of grain-boundary on the hydrogen-induced degradation inthin-film ferroelectric capacitors

The electrical properties of thin-film ferroelectric capacitors are known to degrade severely when exposed to hydrogen. In this study, we directly measured the effects of the grain boundary on the hydrogen-induced degradation in ferroelectric Pb(Zr, Ti)O₃ (PZT) thin films by the location of the top Pt electrode either inside the grains or at the grain boundary. A strong relationship between the grain boundary and the electrical properties of ferroelectric capacitors as a result of hydrogen annealing was found. The degradation of the electrical properties in thin-film ferroelectric capacitors after hydrogen annealing is mainly due to the presence of the grain boundary in the ferroelectric thin film     

Behaviors of the positive temperature coefficient of resistance of poly(styrene‐co‐n‐butylacrylate) filled with Ni‐plated core‐shell polymeric particles

Conductive composite films of poly(styrene‐co‐n‐butylacrylate) copolymers filled with low‐density, Ni‐plated core‐shell polymeric particles were prepared and their behaviors of positive temperature coefficient of resistance (PTCR) were investigated. When the conductive fillers in the composite film were loaded beyond the critical volume, 10 up to 25 vol %, composite films exhibited a unique electrical resistant transition behavior, which the electrical resistance rapidly increased by several orders of magnitude at the critical temperature. The PTCR transition temperature, in general, occurred before the glass transition temperature of polymer matrix. Further increased the conductive filler loading to 30 vol %, the overpacked conduction paths were formed in the entire composite and the PTCR effects became blurred. While the composite film treated with thermal cycle several times from room temperature up to 120 °C, the electrical resistivity increased accompanied with the shift of the PTCR transition to lower temperature. The reason might have been caused by the formed interfacial cracks within the composite film. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 322–329, 2007     

Immittance function simulator using a single current conveyor

A novel circuit for realising negative immittance using a single plus-type second-generation current conveyor is proposed. The immittance values of the the circuit, which only use four passive elements, can be orthogonally adjusted. The circuit does not require component matching     

Analogue implementation of a neural network controller for UPSinverter applications

An analogue neural-network controller for UPS inverter applications is presented. The proposed neural-network controller is trained off-line using patterns obtained from a simulated controller, which had an idealized load-current-reference. Simulation results show that the proposed neural-network controller can achieve low total harmonic distortion under nonlinear loading condition and good dynamic responses under transient loading condition. To verify the performance of the proposed NN controller, a hardware inverter with an analogue neural network (NN) controller (using mainly operational amplifiers and resistors) is built. Additionally, for comparison purposes, a PI controller with optimized parameters is built. Experimental results confirm the simulation results and show the superior performance of the NN controller especially under rectifier-type loading condition. Implementing the analogue neural-network controller using programmable integrated circuits is also discussed     

Electromagnetic interference mitigation by using a spread-spectrumapproach

We investigate a new technique, referred to as spread-spectrum clock generation (SSCG), for reducing the level of radiated emission from devices with digital clock signals. To calculate the radiated emissions from such devices, we model the radiating geometry and compute the radiated field at a multitude of frequencies by using NEC-4, which is an electromagnetic field solver based on the method of moments (MoM). We consider a variety of modulating profiles for the spread spectrum clock and demonstrate that by using a frequency deviation of only 1%, we can achieve from 10 to 30 dB reduction in the radiated emission levels