Stressed Kinetics of Nanoemulsion Formulation Encapsulated Ropinirole with a Validated Ultra High Performance Liquid Chromatography–Synapt Mass Spectrometry (UPLC‐MS/MS ESI‐Q‐TOF)

A highly sensitive ultra high pressure liquid chromatography (UHPLC‐MSMS) method for estimation of ropinirole in rat brain homogenate and plasma has been validated. The method was successfully used for the degradation kinetics in different stress condition and regulated temperature. The chromatographic separation was achieved using isocratic mobile phase, consisting of acetonitrile–2mM ammoniumacetate (28:72 v/v; 0.25 mL min^?1). The mass spectrometer was operated in synapt mass spectrometry mode via positive electrospray ionization using the transitions m/z 260 → m/z 261 for ropinirole, and m/z 324.39 → m/z 262.161 as a parent ion of escitalopram (IS). The assay for ropinirole was linear over the range of 0.5–100 ng mL^?1 (r²; 0.999). The intra‐ and inter day precisions were less than 11.2% in terms of relative standard deviation (R.S.D.), and the accuracy was within ±6.4% in terms of relative error (RE). The mean extraction‐efficiency of QC samples (MQC, 8 ng/mL) was ≥80%. The lower limit of quantification (LLOQ) was 0.049 ng/mL where as lower limit of detection (LLOD) was 0.016 ng/mL. All the peaks of degradation were well resolved. The degradation kinetics of ropinirole, showed highest stability (t_1/2 256.66/h; t_0.9, 39.11/h) in acidic medium, lower stability in alkaline environment (t_1/2, 103.43/h; t_0.9, 15.76/h) and highly susceptible in oxidative environment (t_1/2, 21.58/h; t_0.9, 3.28/h). The applicability of this assay was demonstrated and successfully applied for pharmacokinetic profiling of ropinirole in Wister rat brain homogenate after intranasal administration.     

Phase diagram of a two-dimensional system with anomalous liquid properties

Using Monte Carlo simulation techniques, we calculate the phase diagram for a square-shoulder square-well potential in two dimensions that has been previously shown to exhibit liquid anomalies consistent with a metastable liquid-liquid critical point. We consider the liquid, gas, and five crystal phases, and find that all the melting lines are first order, despite a small range of metastability. One melting line exhibits a temperature maximum, as well as a pressure maximum that implies inverse melting over a small range in pressure.     

Shape-directing role of cetyltrimethylammonium bromide in the preparation of silver nanoparticles

We report a simple chemical reduction method for the synthesis of different colored silver nanoparticles, AgNP, using tyrosine as a reducing agent. Effects of cetyltrimethylammonium bromide, CTAB, and tyrosine concentrations are analyzed by UV-visible measurements and scanning electron microscopy (SEM) to evaluate the mode of AgNP aggregation. The position and shape of the surface resonance plasmon absorption bands strongly depend on the reaction conditions, i.e., [CTAB], [tyrosine], and reaction time. Sub-, post-, and dilution-micellar effects are accountable for the fast and slow nucleation and growth processes. Spectrophotometric measurement also shows that the average size and the polydispersity of AgNP increase with [CTAB] in the solution. CTAB acted as a shape-directing agent.     

Design and construction of endo-functionalized multiferrocenyl hexagons via coordination-driven self-assembly and their electrochemistry

The construction of a new family of endo-functionalized multiferrocenyl hexagons with various sizes via coordination-driven self-assembly is described. The structures of these novel metallacycles, containing several ferrocenyl moieties at their interior surface, are characterized by multinuclear NMR ((31)P and (1)H) spectroscopy, cold-spray ionization mass spectrometry (CSI-TOF-MS), elemental analysis, and molecular modeling. Insight into the structural and electrochemical properties of these endo-functionalized multiferrocenyl hexagons was obtained through cyclic voltammetry investigation.     

Energetics of anionic surfactant-additive systems at the cloud point

The energetics of clouding in anionic surfactant (SDBS) and tetrabutylammonium bromide system in the presence of additives, such as ureas, amino acids and sugars is reported. The change of standard Gibbs energy of solubilization (ΔG _s ^o) for all of the additives was found to be negative. The values of change of standard enthalpy (ΔH _s ^o) and that of standard entropy (TΔS _s ^o) values were found to depend on the type and chemistry of the additive. The results were explained on the basis including chemistry of additives, their effect on water structure, and solubilization of additives either in the micellar or in aqueous phases.     

Theoretical investigation of half‐metallicity in Co/Ni substituted AlN

Results of Co and Ni substituted AlN in the zinc blende phase are presented. For spin up states, the hybridized N‐2p and Co/Ni‐3d states form the valance bands with a bandgap around the Fermi level for both materials, while in the case of the spin down states, the hybridized states cross the Fermi level and hence show metallic nature. It is found that, Al_0.75Co_0.25N and Al_0.75Ni_0.25N are ferromagnetic materials with magnetic moments of 4 μ_B and 3 μ_B, respectively. The integer magnetic moments and the full spin polarization at the Fermi level make these compounds half‐metallic semiconductors. Furthermore it is also found that the interaction with the N‐2p state splits the 5‐fold degenerate Co/Ni‐3d states into t_2g and e_g states. The t_2g states are located at higher energies than the e_g states caused by the tetrahedral symmetry of these compounds. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

A study of nonlinear Langevin equation involving two fractional orders in different intervals

This paper studies a nonlinear Langevin equation involving two fractional orders α∈(0,1] and β∈(1,2] with three-point boundary conditions. The contraction mapping principle and Krasnoselskii’s fixed point theorem are applied to prove the existence of solutions for the problem. The existence results for a three-point third-order nonlocal boundary value problem of nonlinear ordinary differential equations follow as a special case of our results. Some illustrative examples are also discussed.     

On the accuracy of bore reconstruction from input impedance measurements: application to bassoon crook measurements

The determination of a pipe bore from the measured reflection function is a technique that has reached a certain maturity. However, the measurement of the reflection function in the time domain (pulse reflectometry) requires equipment that is rather difficult to operate. On the other hand, the techniques for measuring the input impedance have reached an unquestionable maturity with respect to measurement setup and to calibration. It is thus likely that impedance measurements might be able to give the same information. By doing simulations, it is first shown that the reflection function deduced from the input impedance gives access to the bore with a precision comparable with that obtained with pulse reflectometry. It is then shown that the accuracy obtained with measurements is of the same order as that obtained from simulations. The technique is then used for the dimensional inspection of bassoon crooks.     

Dynamic characteristics of nanoindentation in Ni:A molecular dynamics simulation study

In this work,three-dimensional molecular dynamics simulation is carried out to elucidate the nanoindentation behaviour of single crystal Ni.The substrate indenter system is modelled using hybrid interatomic potentials including the manybody potential(embedded atom method) and two-body Morse potential.The spherical indenter is chosen,and the simulation is performed for different loading rates from 10 m/s to 200 m/s.Results show that the maximum indentation load and hardness of the system increase with the increase of velocity.The effect of indenter size on the nanoindentation response is also analysed.It is found that the maximum indentation load is higher for the large indenter whereas the hardness is higher for the smaller indenter.Dynamic nanoindentation is carried out to investigate the behaviour of Ni substrate to multiple loading-unloading cycles.It is observed from the results that the increase in the number of loading unloading cycles reduces the maximum load and hardness of the Ni substrate.This is attributed to the decrease in recovery force due to defects and dislocations produced after each indentation cycle.     

Mixed convection boundary layer flow along vertical moving thin needles with variable heat flux

The problem of steady laminar mixed convection boundary layer flow of an incompressible viscous fluid along vertical moving thin needles with variable heat flux for both assisting and opposing flow cases is theoretically considered in this paper. The governing boundary layer equations are first transformed into non-dimensional forms. The curvature effects are incorporated into the analysis whereas the pressure variation in the axial direction has been neglected. These equations are then transformed into similarity equations using the similarity variables, which are solved numerically using an implicit finite-difference scheme known as the Keller-box method. The solutions are obtained for a blunt-nosed needle (m = 0). Numerical calculations are carried out for various values of the dimensionless parameters of the problem, which include the mixed convection parameter λ, the Prandtl number Pr and the parameter a representing the needle size. It is shown from the numerical results that the skin friction coefficient, the surface (wall) temperature and the velocity and temperature profiles are significantly influenced by these parameters. The results are presented in graphical form and are discussed in detail.