The Lifting Model for Reconfiguration

Given a pair of start and target configurations, each consisting of n pairwise disjoint disks in the plane, what is the minimum number of moves that suffice for transforming the start configuration into the target configuration? In one move a disk is lifted from the plane and placed back in the plane at another location, without intersecting any other disk. We discuss efficient algorithms for this task and estimate their number of moves under different assumptions on disk radii. We then extend our results for arbitrary disks to systems of pseudodisks, in particular to sets of homothetic copies of a convex object.     

An EKV-based high voltage MOSFET model with improved mobility and drift model

An EKV-based high voltage MOSFET model is presented. The intrinsic channel model is derived based on the charge based EKV-formalism. An improved mobility model is used for the modeling of the intrinsic channel to improve the DC characteristics. The model uses second order dependence on the gate bias and an extra parameter for the smoothening of the saturation voltage of the intrinsic drain. An improved drift model [Chauhan YS, Anghel C, Krummenacher F, Ionescu AM, Declercq M, Gillon R, et al. A highly scalable high voltage MOSFET model. In: IEEE European solid-state device research conference (ESSDERC), September 2006. p. 270–3; Chauhan YS, Anghel C, Krummenacher F, Maier C, Gillon R, Bakeroot B, et al. Scalable general high voltage MOSFET model including quasi-saturation and self-heating effect. Solid State Electron 2006;50(11–12):1801–13] is used for the modeling of the drift region, which gives smoother transition on output characteristics and also models well the quasi-saturation region of high voltage MOSFETs. First, the model is validated on the numerical device simulation of the VDMOS transistor and then, on the measured characteristics of the SOI-LDMOS transistor. The accuracy of the model is better than our previous model [Chauhan YS, Anghel C, Krummenacher F, Maier C, Gillon R, Bakeroot B, et al. Scalable general high voltage MOSFET model including quasi-saturation and self-heating effect. Solid State Electron 2006;50(11–12):1801–13] especially in the quasi-saturation region of output characteristics.     

Semicarbazones and thiosemicarbazones,XII: Crystal structure of salicylaldehyde semicarbazone

Summary The crystal and molecular structure of salicylaldehyde semicarbazone was obtained by single crystal X-ray diffraction. The O atom of the semicarbazone fragment isanti to the N atom of the hydrazinic group. The distribution of bond lengths in the semicarbazone fragment indicates delocalization of the -electrons. The crystal structure is stabilized by intra- and intermolecular hydrogen bonds.

---

Semicarbazone und Thiosemicarbazone, 12. Mitt.: Die Kristallstruktur des Salicylaldehyd-Semicarbazons

Zusammenfassung Die Kristallstruktur und die molekulare Struktur des Salicylaldehyd-Semicarbazons wurde über Einkristall-Röntgenstreuung ermittelt. Das O-Atom des Semicarbazonteils stehtanti zum N-Atom der Hydrazin-Gruppierung. Die Bindungslängen in der Semicarbazoneinheit zeigen eine Delokalisierung der -Elektronen an. Die Geometrie der Verbindung wird durch stabilisierende intra- und intermolekulare Wasserstoffbrückenbindungen bestimmt.

     

Transamination Studies on N-(1-Alkenylthio)phthalimides and Related Compounds. Synthesis of 1-Alkenesulfenamides and 1-Alkenesulfonamides(1)

In an attempt to develop a method for the general preparation of 1-alkenesulfenamides, some N,N-bis(trimethylsilyl)-1-alkenesulfenamides (4) were converted to a number of nitrogen functionalized analogs through desilylation and acylation procedures. Mono- and dibenzoylated derivatives 5aand 6a did not undergo transamination reactions with simple amines. Transamination reactions could be achieved once compounds 4 were converted to thiophthalimides 7. The transamination products 8 are unstable to chromatography, but could be oxidized to 1-alkenesulfonamides 9 using MCPBA. Some of the sulfenamides 8 may be stable to distillation. 3-(Alkenylthioimino)phthalides 11, isomers of thiophthalimides 7, also react with amines, but the process of ring opening accompanies transamination. It was found that the transamination reactions of 11 probably involve the intermediacy of isomers 7.     

Cyclobut-2-enones from Alkynes via Dichlorocyclobut-2-enones

The [2 + 2]-cycloaddition of dichloroketene (prepared in situ from CCl₃COCl and Zn(Cu)) with three alkynes 1a–c to form 2,3-dimethyl-( 2a ), 2,3-diethyl-( 2b ) and 3-butyl-4,4-dichlorocyclobut-2-enone ( 2c ) proceeds rapidly in the absence of POCl₃. The primary products 2a–c rearrange in situ to the 2,4-dichlorocyclobut-2-enones 3a–c under the influence of ZnCL₂ produced during the reaction. ZnCl₂ converts both 2a and 3a into a 4:6 equilibrium mixture of the two; this isomerization does not occur with LiCl. The Cl-atoms of both 2a , b and 3a , b and of 2c may reductively be removed with Zn(Cu) in AcOH/pyridine to afford the alkylcyclobutenones 4a-c . Without pyridine, this reduction gives ca. 1:1 mixtures of the double-bond isomers 4 and 5 in low yields. The cyclobutenones 2c and 4c may be deuterated by CD₃COOD in the presence of pyridine. D -Atom is introduced into 2c at C(4) and at C(γ), and into 4c at C(2) and C(4). A mechanism for this deuteration is considered, which does not involve a cyclobutadienolate 7 , but rather a cyclobutenolate of type 8 . The reductions of 2 and 3 to 4 might also pass through the same type of intermediate 8 .     

Synthesis of new mono-functionalised tetrathiafulvalene derivatives by reactions of etrathiafulvalenyllithium with aldehydes and ketones: X-ray crystal structures of TTF-CMe(OH)Fc, TTF-CMe(OMe)Fc and TTF-CH(OMe)TTF (Fc = ferrocenyl)

Reactions of tetrathiafulvalenyllithium (TTF-Li) with a range of aldehydes and ketones have been explored for the first time, to provide an efficient route to mono-functionalised TTF derivatives of general formulae TTF-CH(OH)R (R = alkyl, phenyl, tetrathiafulvalenyl and ferrocenyl) and TTF-CR(OH)R′ (R = alkyl, phenyl, R′ = alkyl, phenyl, tetrathiafulvalenyl, ferrocenyl, and R-R′ = fluorenyl). Subsequent transformations involving the reactive alcohol group of some of these compounds are reported. The structures of the three title compounds have been established by single-crystal X-ray analysis.     

Homolytic displacement at carbon: XI. Intramolecular homolytic displacement as a route to cyclopentane and tetrahydrofuran derivatives from hex-5-enyl- andhex-3-oxo-5-enylcobaloximes

5-Methylhex-5-enylcobaloxime reacts with carbon tetrachloride and with fluorotrichloromethane at 80–100°C to give substantially pure 1-methyl-1-(β,β,β-trichloroethyl)- and 1-methyl-1-β-fluoro-β,β-dichloroethyl)-cyclopentane. Hex-5-enylco-baloxime also gives trichloroethylcyclopentane from carbon tetrachloride, but the yield is dependent on the concentration of carbon tetrachloride. Similar cyclisation to give trichloroethyl- or fluorodichloroethyltetrahydrofuran is observed in the reactions of hex-3-oxo-5-enylcobaloxime with carbon tetrachloride and fluorotrichloromethane. However, no cyclisation was observed in the reactions of the ester, hex-2-one-3-oxo-5-enylcobaloxime, with carbon tetrachloride. These reactions are believed to take place by attack of a polyhalogenomethyl radical at the terminal unsaturated carbon of the organic ligand, followed either by an intramolecular homolytic displacement in which the carbon radical at position-5 attacks carbon-1 with displacement of cobaloxime(II), or by a halogen atom abstraction.     

Comment: 2004's fastest organic and biomolecular chemistry!

In January 2003, the Royal Society of Chemistry launched Organic & Biomolecular Chemistry (OBC)--a journal promising to provide high quality research from all aspects of synthetic, physical and biomolecular organic chemistry. The journal was set to build upon the foundations laid down by its predecessor publications (J. Chem. Soc., Perkin Trans. 1 and J. Chem. Soc., Perkin Trans. 2) as well as complement the subject coverage already published in prestigious general chemistry journals such as Chemical Communications and Chemical Society Reviews. Nearly two years on, just how is the programme developing and what can the community expect to see from the Royal Society of Chemistry (RSC)?     

Reaction of N-phenyl maleimide with aminosilane monolayers

Reaction of N-phenyl maleimide (NPM) with silica surfaces modified with a self-assembled monolayer of (aminopropyl)triethoxysilane (APTES) was investigated using infrared spectroscopy (FTIR), elemental analysis, and titration assays. This reaction is of interest as a test case for using amine-maleimide coupling for immobilization of biomolecules. Addition of NPM to surface APTES residues was consistently sub-stoichiometric, with typical yields of about 75% on monolayers with a coverage of 1.15 APTES residues/nm2. Titration analysis found negligible presence of imide alkene C=C bonds in modified supports, indicating that addition of NPM to APTES proceeded via amine attack at the imide olefinic bond. FTIR measurements also revealed presence of amide bands which intensified over periods of 10 h. These observations were attributed to a slower secondary process in which APTES amines attack imide carbonyls to produce amide linkages. Stability of NPM-modified surfaces was examined under room temperature storage in pH 7 buffer up to 72 h and for 2 h exposure to buffer at temperatures up to 90 degrees C. It was found that stability was determined by robustness of APTES-silica attachment, with about 30% loss under the harshest conditions investigated.