Reliability analysis of the double counter-rotating ring withconcentrator attachments

The inherently weak reliability behavior of the ring architecture has led network designers to consider various design choices to improve network reliability. We assess the impact of provisions such as node bypass, secondary ring and concentrator trees on network reliability. For this reason, we develop closed-form expressions for the reliability and the mean time-to-failure of the double counter-rotating ring architecture. For our comparisons we adopt the 2-terminal, and the all-terminal reliability criteria. Our network reliability expressions are valid for any time-to-failure distributions of links and nodes     

Active microrheology: a proposed technique to measure normal stress coefficients of complex fluids

We propose a microrheological technique to measure normal stress coefficients (NSCs) of complex fluids, which would represent the first quantitatively accurate measurement of a nonlinear rheological property by microrheology. Specifically, the mechanical response of almost all complex fluids to "weakly nonlinear" deformations is described by the second-order fluid model. Two microrheological probes pulled with equal velocities through a second-order fluid experience a relative force that is linear in the first and second NSCs of the complex fluid. We compute the coupling matrix between NSCs and relative forces for probes translating parallel and perpendicular to their line of centers, which can be inverted to yield NSCs from measured relative forces. There exists an optimum probe separation for inversion of the coupling matrix and, hence, experimental recovery of NSCs.     

Multimodal nonlinear optical polarizing microscopy of long-range molecular order in liquid crystals

We demonstrate orientation-sensitive multimodal nonlinear optical polarizing microscopy capable of probing orientational, polar, and biaxial features of mesomorphic ordering in soft matter. This technique achieves simultaneous imaging in broadband coherent anti-Stokes Raman scattering, multiphoton excitation fluorescence, and multiharmonic generation polarizing microscopy modes and is based on the use of a single femtosecond laser and a photonic crystal fiber as sources of the probing light. We show the viability of this technique for mapping of three-dimensional patterns of molecular orientations and show that images obtained in different microscopy modes are consistent with each other.     

Effect of Electromigration on the Mechanical Performance of Sn-3.5Ag Solder Joints with Ni and Ni-P Metallizations

The effect of moderate electric current density (1 × 10³ to 3 × 10³ A/cm²) on the mechanical properties of Ni-P/Sn-3.5Ag/Ni-P and Ni/Sn-3.5Ag/Ni solder joints was investigated using a microtensile test. Thermal aging was carried out at 160°C for 100 h while the current was passed. The interfacial microstructure and intermetallic compound (IMC) growth were analyzed. It was found that, at these levels of current density, there were no observable voids or hillocks. Samples aged at 160°C without current stressing failed mostly inside the bulk solder with significant prior plastic deformation. The passage of current was found to cause brittle failure of the solder joints and this tendency for brittle failure increased with increasing current density. Fractographic analysis showed that, in most of the electrically stressed samples, fracture occurred at the interface region between the solder and the joining metals. The critical current density that caused brittle fracture was about 2 × 10³ A/cm². Once brittle fracture occurred, the tensile toughness, defined as the energy per unit fractured area, was usually lower than ~5 kJ/m², compared with the case of ductile fracture where this value was typically greater than ~9 kJ/m². When comparing the two types of joint, the brittle failure was found to be more severe with the Ni than with the Ni-P joint. This work also found that the passage of electric current affects the IMC growth rate more significantly in the Ni than in the Ni-P joint. In the case of the Ni joint, the Ni₃Sn₄ IMC at the anode side was appreciably thicker than that formed at the cathode side. However, in the case of electroless Ni-P metallization, this difference was much smaller.     

Multiobjective analog/RF circuit sizing using an improved brain storm optimization algorithm

This paper presents a multiobjective analog/RF circuit sizing tool using an improved brain storm optimization (IMBSO) algorithm with the purpose of analyzing the tradeoffs between competing performance specifications of analog/RF circuit block. A number of improvements are incorporated into IMBSO algorithm at different steps. At first, the clustering step of IMBSO algorithm is augmented with k-means\(++\) seeding technique to select the initial cluster centroids while clustering using k-means clustering technique. As a second improvement, the proposed IMBSO algorithm makes use of random probabilistic decision-making of river formation dynamics scheme to select optimal cluster centroids during population generation step. As a third improvement, an adaptive mutation operator is incorporated inside the IMBSO algorithm to generate new population. Finally, two separate constraint handling techniques are employed to handle both boundary and functional constraints during analog/RF circuit optimization. The performance of the proposed IMBSO algorithm is demonstrated in finding optimal Pareto fronts among different performance specifications of a two-stage operational amplifier circuit, a folded cascode amplifier circuit and a low noise amplifier circuit.     

A parameter uniform difference scheme for parabolic partial differential equation with a retarded argument

The paper deals with the analysis of a non-stationary parabolic partial differential equation with a time delay. The highest order derivative term is affected by the small parameter. This is precisely the case when the magnitude of the convective term becomes much larger compare to that of diffusion term. The solution of problem exhibits steep gradients in the narrow intervals of space and short interval of times. In these cases a dissipative loss turned out to be more complex. Even for the one spatial dimension and one temporal variable, not all difference scheme can capture these steep variation. Although the analysis is restricted to the model in one space dimension, the technique and comparison principles developed should prove useful in assessing the merits of numerical solution of other nonlinear model equations too.     

Newtonian viscosity behavior of dilute to moderately concentrated solutions of cellulose acetate butyrate

The Newtonian viscosity behavior of dilute to moderately concentrated solutions of cellulose acetate butyrate in dioxane was investigated at different temperatures. The viscosity data were analyzed in terms of Martin's and Fedor's relationships and also generalized in terms of reduced variables. The rheological behavior of cellulose acetate butyrate solutions in the whole range of concentrations is determined by the parameter (K_MC [n]). The temperature dependence of viscosities was expressed by the Arrhenius-Frenkel-Eyring equation and the activation energy of viscous flow of polymer solutions (ΔGv) was calculated. ΔGv increases with concentration of polymer solution and is independent of temperature. The preexponential factor, A, related to activation entropy, decreases with concentration of polymer solution. The thermodynamic parameter of viscous flow for cellulose acetate butyrate (CAB)-dioxane solutions is indicative of moderately stiff structure for CAB in solutions.     

Numerical modelling and analysis of external gear pumps by applying generalized control volumes

Components in gear pumps usually involve complex geometrical arrangements in order to achieve the desired performance. The use of lumped parametric models is considered the most accurate and effective method for investigation of the associated design issues. In this study, the numerical modelling approach based on the lumped parameters and control volume concepts is reviewed, especially for gear teeth within the meshing zone. To apply the approach to the entire gear pump, control volume concepts are generalized to all gear pockets and flow orifices with some reasonable assumptions. The assumptions include instantaneous angular positions, orifice transitions and imagined control volumes with internal flows. The fluid dynamics and pump performance, which even have the measurement difficulties, can be estimated to investigate and optimize the design parameters of gears by the model. A simulation example and its experimental results of a gear machine are presented to validate the proposed approach in this article.     

Biocatalysis for C–S bond formation: Porcine pancreatic lipase (PPL) catalysed thiolysis/hydrothiolation reactions in sole water

In this paper, a biocatalytic route is described wherein PPL, lipase from porcine pancreas, in conjunction with water on reaction with different thiophenols and styrene oxides undergo thiolysis with C-S bond formation without the use of any metal catalysts, oxidants, bases, additives or organic solvents towards formation of β-hydroxysulfides in good to excellent yields with high regioselectivity at room temperature. Furthermore, PPL also facilitates thiophenols to undergo hydrothiolation with styrenes or phenylacetylenes in sole water and thus forming linear thioethers or vinylsulfides respectively via C–S bond formation. In addition to the straightforward and atom-efficient protocol, a gram-scale synthesis of β-hydroxysulfide and recyclability for three consecutive cycles without decrease in efficiency of PPL make our biocatalytic protocol for constructing C–S bond highly valuable from both environmental and economic viewpoints than traditional chemical practices.