Stapled Peptides as HIF-1α/p300 Inhibitors: Helicity Enhancement in the Bound State Increases Inhibitory Potency

Protein–protein interactions (PPIs) control virtually all cellular processes and have thus emerged as potential targets for development of molecular therapeutics. Peptide-based inhibitors of PPIs are attractive given that they offer recognition potency and selectivity features that are ideal for function, yet, they do not predominantly populate the bioactive conformation, frequently suffer from poor cellular uptake and are easily degraded, for example, by proteases. The constraint of peptides in a bioactive conformation has emerged as a promising strategy to mitigate against these liabilities. In this work, using peptides derived from hypoxia-inducible factor 1 (HIF-1α) together with dibromomaleimide stapling, we identify constrained peptide inhibitors of the HIF-1α/p300 interaction that are more potent than their unconstrained sequences. Contrary to expectation, the increased potency does not correlate with an increased population of an α-helical conformation in the unbound state as demonstrated by experimental circular dichroism analysis. Rather, the ability of the peptide to adopt a bioactive α-helical conformation in the p300 bound state is better supported in the constrained variant as demonstrated by molecular dynamics simulations and circular dichroism difference spectra.     

A Promising Electrochemical Platform for Dopamine and Uric Acid Detection Based on a Polyaniline/Iron Oxide-Tin Oxide/Reduced Graphene Oxide Ternary Composite

A ternary polyaniline/Fe₂O₃-SnO₂/reduced graphene oxide (PFSG) nanocomposite was prepared using a simple two-step hydrothermal treatment. The composite was applied as a glassy carbon electrode modifier (GCE) to enhance dopamine (DA) and uric acid (UA) detection. The ternary PFSG composite was compared with its binary precursor Fe₂O₃-SnO₂/reduced graphene oxide (FSG). The influence of the modified GCE electrodes on their performance as a sensing platform was determined. GCE/PFSG showed better sensing parameters than GCE/FSG due to the introduction of polyaniline (PANI), increasing the electrocatalytic properties of the electrode towards the detected analytes. GCE/PFSG enabled the detection of low concentrations of DA (0.076 µM) and UA (1.6 µM). The peak potential separation between DA and UA was very good (180 mV). Moreover, the DA oxidation peak was unaffected even if the concentration of UA was ten times higher. The fabricated sensor showed excellent performance in the simultaneous detection with DA and UA limits of detection: LOD_DA = 0.15 µM and LOD_UA = 6.4 µM, and outstanding long-term stability towards DA and UA, holding 100% and 90% of their initial signals respectively, after one month of use.     

A Molecular Strategy to Lock‐in the Conformation of a Perylene Bisimide‐Derived Supramolecular Polymer

Locking‐in the conformation of supramolecular assemblies provides a new avenue to regulate the (opto)electronic properties of robust nanoscale objects. In the present contribution, we show that the covalent tethering of a perylene bisimide (PBI)‐derived supramolecular polymer with a molecular locker enables the formation of a locked superstructure equipped with emergent structure–function relationships. Experiments that exploit variable‐temperature ground‐state electronic absorption spectroscopy unambiguously demonstrate that the excitonic coupling between nearest neighboring units in the tethered superstructure is preserved at a temperature (371 K) where the pristine, non‐covalent assembly exists exclusively in a molecularly dissolved state. A close examination of the solid‐state morphologies reveals that the locked superstructure engenders the formation of hierarchical 1D materials which are not achievable by unlocked assemblies. To complement these structural attributes, we further demonstrate that covalently tethering a supramolecular polymer built from PBI subunits enables the emergence of electronic properties not evidenced in non‐covalent assemblies. Using cyclic voltammetry experiments, the elucidation of the potentiometric properties of the locked superstructure reveals a 100‐mV stabilization of the conduction band energy when compared to that recorded for the non‐covalent assembly.     

High Compression‐Induced Conductivity in a Layered Cu–Br Perovskite

We show that the onset pressure for appreciable conductivity in layered copper‐halide perovskites can decrease by ca. 50 GPa upon replacement of Cl with Br. Layered Cu–Cl perovskites require pressures >50 GPa to show a conductivity of 10^?4 S cm^?1, whereas here a Cu–Br congener, (EA)₂CuBr₄ (EA=ethylammonium), exhibits conductivity as high as 2×10^?3 S cm^?1 at only 2.6 GPa, and 0.17 S cm^?1 at 59 GPa. Substitution of higher‐energy Br 4p for Cl 3p orbitals lowers the charge‐transfer band gap of the perovskite by 0.9 eV. This 1.7 eV band gap decreases to 0.3 eV at 65 GPa. High‐pressure X‐ray diffraction, optical absorption, and transport measurements, and density functional theory calculations allow us to track compression‐induced structural and electronic changes. The notable enhancement of the Br perovskite's electronic response to pressure may be attributed to more diffuse Br valence orbitals relative to Cl orbitals. This work brings the compression‐induced conductivity of Cu‐halide perovskites to more technologically accessible pressures.     

Photoswitchable Sol–Gel Transitions and Catalysis Mediated by Polymer Networks with Coumarin‐Decorated Cu24L24 Metal–Organic Cages as Junctions

Photoresponsive materials that change in response to light have been studied for a range of applications. These materials are often metastable during irradiation, returning to their pre‐irradiated state after removal of the light source. Herein, we report a polymer gel comprising poly(ethylene glycol) star polymers linked by Cu₂₄L₂₄ metal–organic cages/polyhedra (MOCs) with coumarin ligands. In the presence of UV light, a photosensitizer, and a hydrogen donor, this “polyMOC” material can be reversibly switched between Cu^II, Cu^I, and Cu⁰. The instability of the MOC junctions in the Cu^I and Cu⁰ states leads to network disassembly, forming Cu^I/Cu⁰ solutions, respectively, that are stable until re‐oxidation to Cu^II and supramolecular gelation. This reversible disassembly of the polyMOC network can occur in the presence of a fixed covalent second network generated in situ by copper‐catalyzed azide‐alkyne cycloaddition (CuAAC), providing interpenetrating supramolecular and covalent networks.     

Adventitious isolation of a pseudorotaxane complex of a trans-bis(Hydroxymethylbenzo)-27-crown-9 pyridyl cryptand and a viologen

ABSTRACT

The adventitious isolation and crystal structure of a pseudorotaxane complex of a trans-substituted dibenzo-27-crown-9-based pyridyl cryptand (6) and N,N’-dimethyl-4,4?-bipyridinium bis(hexafluorophosphate) (5) are reported.     

Production of Verbascoside,Isoverbascoside and Phenolic Acids in Callus,Suspension, and Bioreactor Cultures of Verbena officinalis and Biological Properties of Biomass Extracts

Callus, suspension and bioreactor cultures of Verbena officinalis were established, and optimized for biomass growth and production of phenylpropanoid glycosides, phenolic acids, flavonoids and iridoids. All types of cultures were maintained on/in the Murashige and Skoog (MS) media with 1 mg/L BAP and 1 mg/L NAA. The inoculum sizes were optimized in callus and suspension cultures. Moreover, the growth of the culture in two different types of bioreactors—a balloon bioreactor (BB) and a stirred-tank bioreactor (STB) was tested. In methanolic extracts from biomass of all types of in vitro cultures the presence of the same metabolites—verbascoside, isoverbascoside, and six phenolic acids: protocatechuic, chlorogenic, vanillic, caffeic, ferulic and rosmarinic acids was confirmed and quantified by the HPLC-DAD method. In the extracts from lyophilized culture media, no metabolites were found. The main metabolites in biomass extracts were verbascoside and isoverbascoside. Their maximum amounts in g/100 g DW (dry weight) in the tested types of cultures were as follow: 7.25 and 0.61 (callus), 7.06 and 0.48 (suspension), 7.69 and 0.31 (BB), 9.18 and 0.34 (STB). The amounts of phenolic acids were many times lower, max. total content reached of 26.90, 50.72, 19.88, and 36.78 mg/100 g DW, respectively. The highest content of verbascoside and also a high content of isoverbascoside obtained in STB (stirred-tank bioreactor) were 5.3 and 7.8 times higher than in extracts from overground parts of the parent plant. In the extracts from parent plant two iridoids—verbenalin and hastatoside, were also abundant. All investigated biomass extracts and the extracts from parent plant showed the antiproliferative, antioxidant and antibacterial activities. The strongest activities were documented for the cultures maintained in STB. We propose extracts from in vitro cultured biomass of vervain, especially from STB, as a rich source of bioactive metabolites with antiproliferative, antioxidant and antibacterial properties.     

1,3‐Difunctionalizations of [1.1.1]Propellane via 1,2‐Metallate Rearrangements of Boronate Complexes

1,3‐Disubstituted bicyclo[1.1.1]pentanes (BCPs) are valuable bioisosteres of para‐substituted aromatic rings. The most direct route to these structures is via multicomponent ring‐opening reactions of [1.1.1]propellane. However, challenges associated with these transformations mean that difunctionalized BCPs are more commonly prepared by multistep reaction sequences with BCP‐halide intermediates. Herein, we report three‐ and four‐component 1,3‐difunctionalizations of [1.1.1]propellane with organometallic reagents, organoboronic esters, and a variety of electrophiles. This process is achieved by trapping intermediate BCP‐metal species with boronic esters to form boronate complexes, which are versatile intermediates whose electrophile‐induced 1,2‐metallate rearrangement chemistry enables a broad range of C?C bond‐forming reactions.     

Blue-Shift Hydrogen Bonds in Silyltriptycene Derivatives: Antibonding σ* Orbitals of the Si−C Bond as Effective Acceptors of Electron Density

Triptycene derivatives are widely utilized in different fields of chemistry and materials sciences. Their physicochemical properties, often of pivotal importance for the rational design of triptycene-based functional materials, are influenced by noncovalent interactions between substituents mounted on the triptycene skeleton. Herein, a unique interaction between electron-rich substituents in the peri position and the silyl group located on the bridgehead sp³-carbon is discussed on the example of 1,4-dichloro-9-(p-methoxyphenyl)-silyltriptycene (TRPCl) which exists in solution in the form of two rotamers differing by dispositions, syn or anti, of the Si−C_Ph (the C_Ph atom is from the p-methoxyphenyl group) bond against the peri-Cl atom. For the first time, substantial differences between the Si−C_Ph bonds in these two dispositions are identified, based on indirect experimental and direct theoretical evidence. For these two orientations, the experimental ¹J(Si,C_Ph) values differ by as much as 10 percent. The differences are explained in terms of effective electron density transfer from the peri-Cl atom to the antibonding σ* orbitals of the Si−X bonds (X=H, C_Ph) oriented anti to that atom. The electronic effects are revealed by an NBO analysis. Connections of these observations with the notion of blue-shifting hydrogen bonds are discussed.