An Improved Architecture of Sixth Subharmonic Mixers in E-Band

An improved architecture of sixth subharmonic mixers is proposed in this paper. In order to meet the need of low conversion loss, antiparallel diodes are selected and the length of four open/shorted microstrip stubs at both sides of the antiparallel diodes are carefully designed. For any important idle frequency components which can’t be reused by the four stubs, reactive terminations are presented by adjusting the length of main RF and LO microstrip. The tested results indicate the lowest conversion loss is 26.1 dB at the radio frequency of 72 GHz, with fixed LO at 12 GHz. The proposed circuit architecture is suitable for the implementation of subharmonic mixers in E-band as well as other millimeter and submillimeter-wave regions where high quality and high frequency LOs are difficult to realize.     

Frequency selective limiters for high dynamic range microwavereceivers

A broadband frequency selective limiter (FSL) which provides over 14 dB of limiting across more than an octave bandwidth is described. The limiter is fabricated with epitaxially grown YIG (yttrium iron garnet) films in a stripline configuration and has a threshold power level of below 0 dBm. Individual limiter strips limit microwave signals in the 1-100-mW range across more than an octave of bandwidth. Multiple FSLs have been cascaded with amplifiers to allow compression of microwave signals with a power range of 60 dB into a range of less than 5 dB     

Standard<Emphasis Type="Italic">SU</Emphasis>(5) supergravity grand unification model and predictions

A review is given of the StandardSU(5) supergravity model. This model has passed an important check regarding unification of the electro-weak and the strong couplings using high precision LEP data. It is shown that for a significant domain of the parameter space the model also satisfies constraints on the SUSY spectrum from CDF and LEP, as well as proton stability and cosmological relic density constraints.     

Prediction and Measurement of Electron Density and Collision Frequency in a Weakly Ionised Pine Fire

Pine litter flame is a weakly ionised medium. Electron-neutral collisions are a dominant form of particle interaction in the flame. Assuming flame electrons to be in thermal equilibrium with neutrals and average electron-neutral collision frequency to be much higher than the plasma frequency, the propagation of microwaves through the flame is predicted to suffer signal intensity loss. A controlled fire burner was constructed where various natural vegetation species could be used as fuel. The burner was equipped with thermocouples and used as a cavity for microwaves with a laboratory quality network analyzer to measure wave attenuation. Electron density and collision frequency were then calculated from the measured attenuation. The parameters are important for numerical prediction of electromagnetic wave propagation in wildfire environments. A controlled pine litter fire with a maximum flame temperature of 1080 K was set in the burner and microwaves (8–10.5 GHz) were caused to propagate through the flame. A microwave signal loss of 1.6–5.8 dB was measured within the frequency range. Based on the measured attenuation, electron density and electron-neutral collision frequency in pine fire were calculated to range from 0.51–1.35?×?10¹⁶ m^?3 and 3.43–5.97?×?10¹⁰ s^?1 respectively.     

Support Vector Regression Model for Millimeter Wave Transitions

In this paper, we introduce a new method, support vector regression (SVR) method, to model millimeter wave transitions. SVR is based on the structural risk minimization (SRM) principle, which leads to good generalization ability for regression problem. The SVR model can be electromagnetically developed with a set of training data and testing data which produced by the electromagnetic simulation. Two Ka-band millimeter wave transitions, i.e., waveguide to microstrip transition and coaxial to waveguide adapter, are used as examples to validate the method. Experimental results show that the developed SVR models have a good predictive ability, and they are useful for interactive CAD of millimeter wave transitions.     

Throughput-efficient coalition formation of selfish/altruistic nodes in ad hoc networks: a hedonic game approach

In this paper, we analyze the problem of throughput-efficient distributed coalition formation (CF) of selfish/altruistic nodes in ad hoc radio networks. We formulate the problem as a hedonic CF game with non-transferable utility and propose different preference relations (CF rules) based on individual/group rate improvement of distributed nodes. We develop a hedonic CF algorithm, through which distributed nodes may self-organize into stable throughput-efficient disjoint coalitions. We apply the concept of frequency reuse over different coalitions, such that the members of each coalition will transmit over orthogonal sub-bands with the available spectrum being optimally allocated among them. We study the computational complexity and convergence properties of the proposed hedonic CF algorithm under selfish and altruistic preferences, and present means to guarantee Nash-stability. In addition, we identify the scenarios in which a CF process might lead to instability (CF cycle), and we propose methods to avoid cycles and define different exit procedures if a CF cycle is inevitable. Performance analysis shows that the proposed algorithm with optimal bandwidth allocation provides a substantial gain, in terms of average payoff per link, over existing coalition formation algorithms for a wide SNR range.     

Report Hexagonal Based Dynamic Location Finding Techniques with Sequence-Based Localization in Wireless Sensor Network

In location and address based Wireless Sensor Networks, secure route detection, data transference, energy conservation and costs are very crucial in existing networks. To overcome the issues and make a secure, correct location finding within sensor node regions (intra) and between sensor nodes regions (inter), many researches are proposed. But none of the process satisfied these issues in efficient manner. To make the secure and exact location finding as efficient manner, we proposed a new location based technique named report hexagonal based dynamic location (RHBDL). This proposed system employed the location discovering scheme using sequence-based localization. Moreover RHBDL is used to find the exact locations of the destination node. The location has been computed using RHBDL by placing the mobile nodes in the edge and radio range path of the hexagonal regions. RHBDL preserve the previous communication path based on accuracy, error location, efficient energy and node lifetime. This will help to reduce the alternate location of exact location due to (or by eliminating) unwanted nodes. The most appropriate exact path from source to destination of node location will be formed over the network. The experimentation was performed as the result, our proposed RHBDL technique provides better and exact localization with more accuracy than other radio signal location discovering scheme using sequence-based localization techniques over a range of wireless channel and nodes.     

Interference Evaluation in Cellular Networks

Interference in cellular networks is one of the most common problems in the radio access network. In fact, it is the major issue in cellular networks that affects performances and quality of service. Indeed, interference can be caused by a call on the same frequency from neighboring cell, or a call on an adjacent channel in the same or in neighboring cell. So, we can classify interference on intra-cell interference and inter-cell interference. In 4G, thanks to the use of orthogonal frequency division multiple access and single carrier frequency division multiple access as access techniques in downlink and uplink respectively, intra-cell interference is reduced compared to the inter cell one which caused by the frequency reuse one mechanism and the femto cells deployment. In this work, we will evaluate the interference in different cellular network standards from 2G to 4G.     

Special Important Aspects of the Thomson Effect

A comprehensive study of the mechanisms of heating and cooling originating from an electrical current in semiconductor devices is reported. The variation in temperature associated with the Peltier effect is not related to the presence of heat sources and sinks if the heat flux is correctly determined. The Thomson effect is commonly regarded as a heat source/sink proportional to the Thomson coefficient, which is added to the Joule heating. In the present work, we will show that this formulation of the Thomson effect is not sufficiently clear. When the heat flux is correctly defined, the Thomson heat source/sink is proportional to the Seebeck coefficient. In the conditions in which the Peltier effect takes place, the temperature gradient is created, and, consequently, the Thomson effect will occur naturally.