Studies on recoil proton tracks in NTA films with the T(d,n)He reaction

Recoil proton tracks in nuclear emulsion are counted by scanning them using strip, square or circular field of view of optical microscope. In this paper, the overestimate due to the edge effects in counting recoil proton tracks at different neutron energies produced from the T(d,n)⁴He reaction has been determined by measuring the true track density in NTA film. The overestimate has also been calculated using the measured value of the mean projected track length (L) in the film. The percentage of measured overestimates has been compared with those obtained by calculation and the results agree reasonably well. Fading effect in NTA film has been studied and found to be 22% more in the summer than in the winter season. A great reduction in fading rate could be achieved if the films are desiccated and sealed in highly pure dry nitrogen maintained at an over-pressure of 1000 Pa to reduce water vapour ingress. After the edge effect correction, the sensitivity of NTA film has been calculated from (1.72±0.08)×10⁻³ tracksn⁻¹ to (1.97±0.16)×10⁻³ tracksn⁻¹ in the neutron energy ranges from 15.91 to 18.88 MeV. The response was found to be from 0.24±0.02 trackscm⁻² permSv to 0.26±0.01 trackscm⁻² permSv in the same energy range.     

Energy management for battery-powered reconfigurable computing platforms

We define portable reconfigurable computing platforms as those which have some form of configurable logic coupled with other on-chip or off-chip processing units such as soft processors, embedded processors, and voltage-scalable processors. In the first part of this paper, we present and test a unique methodology where we dynamically change the active area of a field programmable gate array (FPGA) to vary the battery usage and lifetime of the system, by running it on several different taskgraph structures and report an average of 14% and as high as 21%, less battery capacity used, as compared to nonoptimal execution. In the second part of this paper, we integrate the above methodology with more traditional voltage and frequency scaling techniques for portable systems and present a heuristic iterative algorithm for single and multiple processing units. The iterative heuristic algorithm finds a sequence of tasks along with an appropriate design point (implementation option) for each task, such that a deadline is met and the amount of battery energy used is as small as possible. We have used several real-world benchmarks to test the effectiveness of this methodology and we will present the results.     

Capacitor coupled converter (C3) for high power DCconversion

The bang-bang controlled capacitor coupled converter (C³) is described in this paper. Due to the converter's inherent commutating property, the C³ can accommodate thyristors as well as high-power gate turn-off switches, due to zero-current switching transitions. The zero-current switching is achieved at no current stress increase, therefore, the topology is considered appropriate for high-power processing. DC and small signal AC models are derived for the bang-bang controlled C³, a design procedure is proposed, and simulation results are discussed. Finally, oscillograms from a proof of principle prototype circuit are presented     

MITATT mode in DDR heterostructure Impatt

Large signal characterisation of double heterostructure DDR Impatt diode has been carried out in the millimeter-wave range considering the MITATT mode of operation. The structure of the device is p⁺-p₂-p₁-n₁-n₂-n⁺ where impact ionisation and tunneling takes place in the p₁-n₁ region. In this study we have considered two well-known heterostructures, e.g., InP/GaInAs/InP and InP/InGaAsP/InP and one nonconventional structure GaAs/InP/GaAs. The theoretical results of the performances of these devices as regards of output power, efficiency, and negative conductance revealed that the structures are quite promising as the source of power in the millimeter-wave range. The analysis may be used for other mm wave DDR heterostructure Impatts.     

Fluctuation study of pionisation in ultrarelativistic nucleus-nucleus interaction

The scaled factorial moments and the multifractal moments have been investigated in differentη-intervals to study the dynamical fluctuation of pions produced in 200 AGeV³²S-Ag/Br interaction. In order to investigate the detail characteristics of intermittency behaviour, theF-moments are extracted up to the eighth order of moments in differentM-intervals. The analysis indicates a non-thermal phase transition and different regime of particle production during the hadronisation process.     

An optimal repeat inspection plan with several classifications

Multicharacteristic critical components exist in many systems. Such components could be a part of an aircraft, space shuttle or a gas ignition system. A component is critical if it causes disaster or a very high cost upon failure. In this paper, a new inspection plan for critical multicharacteristic components is presented. A mathematical model that depicts the plan is developed. An algorithm is proposed for finding the optimal number of repeat inspections and the sequence of characteristics for inspection that minimizes expected total cost per accepted component. The expected cost consists of the cost of inspection and the cost of misclassifications. The inspection plan and the model developed generalize existing models in the literature and provide a more realistic formulation. An example is given to demonstrate the plan and the model.     

Poly(ortho‐phenylene ethynylene)s: Synthetic accessibility and optical properties

Poly(ortho‐phenylene ethynylene)s (PoPEs) have been synthesized via an in situ activation/coupling AB′ polycondensation protocol. The resulting polymers have been characterized by several analytical methods and are shown to have no structural defects. Although the Sonogashira–Hagihara polycondensation reaction is less efficient than for the preparation of the corresponding meta‐ and para‐linked polymers, presumably because of steric hindrance caused by the ortho substituents, the process can be accelerated by the use of microwave irradiation. Optical spectroscopy indicates solvent‐dependent conformational changes between extended transoid and helical cisoid conformations, providing the first experimental evidence for solvophobically driven folding of the PoPE backbone. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1619–1627, 2006     

Differential oscillator strengths and dipole polarizabilities for transitions of the helium sequence

The dipole radial integral for an initial discrete 1s state and a final continuum state has been calculated under the screened hydrogenic model. In this model, single-electron hydrogenic wave functions are employed and the initial and the final states are treated by two different effective-charge parameters. Numerical values of differential oscillator strengths for transitions from 1s 21S to the continuum for the helium sequence ions are obtained. Also calculated are the dipole polarizabilities, which are found to be in excellent agreement with the results of other authors.     

1‐Acetyl‐3′‐(4‐bromophenyl)‐3′‐chlorospiro[3H‐indole‐3,2′‐oxetan]‐2(1H)‐one

In the title compound, C₁₈H₁₃BrClNO₃, the heterocyclic ring of the indole is distorted from planarity towards an envelope conformation. The orientations of the indole, oxetane, chloro and bromo­phenyl substituents are conditioned by the sp³ states of the spiro‐junction and the Cl‐attached C atoms.