Effect of Al2O3 nanoparticles on the steel-glass/epoxy composite joint bonded by a two-component structural acrylic adhesive

This paper reports a study on the effect of Al₂O₃ nanoparticles on the adhesion strength of steel-glass/epoxy composite joints bonded by a two-component structural acrylic adhesive. The addition of Al₂O₃ nanoparticles to the two-component acrylic adhesive led to a remarkable enhancement in the shear and tensile strength of the composite joints. The shear and tensile strength of the adhesive joints increased by addition of Al₂O₃ up to 1.5 wt%, which decreased by further addition of the nanofiller. Introduction of the nanoparticles caused a reduction in the peel strength of the joints. DSC analysis revealed that the glass transition temperature (Tg) of the adhesives rose by increasing the nanofiller content. The advancing water contact angle was decreased for adhesives containing nanoparticles. SEM micrographs indicated good dispersions of the Al₂O₃ nanoparticles within the acrylic matrix in the specimens with up to 1.5 wt% Al₂O₃ and revealed that addition of nanoparticles altered the fracture morphology from smooth to rough fracture surfaces.     

MYMIV-AC2, a Geminiviral RNAi Suppressor Protein, Has Potential to Increase the Transgene Expression

Gene silencing is one of the limiting factors for transgene expression in plants. But the plant viruses have learnt to suppress gene silencing by encoding the protein(s), called RNA silencing suppressor(s) (RSS). Hence, these proteins could be used to overcome the limitation for transgene expression. The RNAi suppressors, namely HC-Pro and P19, have been shown to enhance the transgene expression but other RSS proteins have not been screened for similar role. Moreover, none of RSSs from the DNA viruses are known for enhancing the expression of transgenes. The Mungbean Yellow Mosaic India Virus (MYMIV) belonging to the genus Begomovirus within the family of Geminiviridae encodes an RSS called the AC2 protein. Here, we used AC2 to elevate the expression of the transgenes. Upon introduction of MYMIV-AC2 in the silenced GFP transgenic tobacco lines, by either genetic hybridisation or transgenesis, the GFP expression was enhanced several fold in F1 and T0 lines. The GFP-siRNA levels were much reduced in F1 and T0 lines compared with those of the initial parental silenced lines. The enhanced GFP expression was also observed at the cellular level. This approach was also successful in enhancing the expression of another transgene, namely topoisomeraseII.     

[bmIm]OH: an efficient basic catalyst for the synthesis of 4H-benzo[d][1,3-]oxazin-4-one derivatives in solvent-free conditions

Reusable [bmIm]OH was found to be a highly efficient renewable homogenous catalyst for the rapid and convenient synthesis of benzoxazine-4-one derivatives from o-iodobenzoic-acid and benzonitrile at 75 °C in moderate to good yields. This methodology provides a facile and straightforward path to construct other related heterocycles in an eco-compatible fashion.     

Experimental and numerical study of residual stresses caused by cold expansion of adjacent holes

Cold expansion is a useful process for imposing compressive residual stresses around the holes in riveted and bolted connections. These stresses increase the fatigue life of holed parts. Distribution and amount of exerted residual stress dependent on various parameters as material, distance of adjacent holes, hole diameter, cold expansion ratio and plate thickness. In this study, experimental and numerical results for two different aluminum alloys and various holes distances are investigated and compared. Effects of mentioned parameters on the residual stress are studied.     

Fabrication and characterization of zinc oxide anti-reflective coating on flexible thin film microcrystalline silicon solar cell

This paper studies the fabrication and characterization of 80 nm zinc oxide anti-reflective coating (ARC) on flexible 1.3 μm thin film microcrystalline silicon (μc-Si) solar cell. High resolution X-ray diffraction (HR-XRD) shows a c-axis oriented ZnO (0 0 2) peak (hexagonal crystal structure) at 34.3° with full width at half maximum (FWHM) of 0.3936°. Atomic force microscope (AFM) measures high surface roughness root-mean-square (RMS) of the layer (50.76 nm) which suggests scattering of the incident light at the front surface of the solar cell. UV–vis spectrophotometer illustrates that ZnO ARC has optical transmittance of more than 80% in the visible and infra-red (IR) regions and corresponds to band gap (E_g) of 3.3 eV as derived from Tauc equation. Inclusion of ZnO ARC successfully suppresses surface reflectance from the cell to 2% (at 600 nm) due to refractive index grading between the Si and the ZnO besides quarter-wavelength (λ/4) destructive interference effect. The reduced reflectance and effective scattering effect of the incident light at the front side of the cell are believed to be the reasons why short-circuit current (I_sc) and efficiency (η) of the cell improve.     

Polymer electrolyte for photoelectrochemical cell and dye-sensitized solar cell: a brief review

This paper reviews the use of solid polymeric electrolyte (SPE) and gel polymeric electrolyte (GPE) in photoelectrochemical cell (PEC) and dye-sensitized solar cell (DSSC). The structure of PEC and its working principle are presented. The various types of polymer electrolytes utilized in PEC and DSSC have been highlighted in this review. It also highlights the comparison of performance of PEC and DSSC utilizing those polymer electrolytes. This review is completed with the list of other SPEs that potentially be tested in DSSC.     

Temperature dependent electrical conductivity of polyaniline/Y2O3 composites

Composites of polyaniline with yttrium oxide (Y₂O₃) nanoparticles have been prepared by chemical polymerizations method by increasing the weight percentage of yttrium oxide. X-Ray diffraction (XRD) and Fourier Transform Infrared Spectra (FTIR) were used to characterize the composites. XRD and FTIR pattern indicate that Polyaniline (PANI) is intercalated into the layers of Y₂O₃ nanoparticles successfully by in situ polymerization and therefore the degree of crystallinity increases due to crystalline of yttrium oxide nanoparticles. The scanning electron micrographs (SEM) also confirm the formation of dual phase of platelet as well as of flaky structure in PANI-Y₂O₃. Temperature dependant DC conductivity showed three dimensional variable ranges hopping (3D VRH) model. Activation energy, density of states and hopping length are calculated and found to be influenced by intercalating PANI into the layers of Y₂O₃ clay.