Selective binding of L-glutamate derivative in aqueous solvents

A chiral bisguanidinium macrocycle binds N-Boc-L-glutamate in a 1 : 1 stoichiometry with significant selectivity in competitive solvent (DMSO-H(2)O).     

Dynamically Restructuring NixCryO Electrocatalyst for Stable Oxygen Evolution Reaction in Real Seawater

In the pursuit of long-term stability for oxygen evolution reaction (OER) in seawater, retaining the intrinsic catalytic activity is essential but has remained challenging. Herein, we developed a Ni_xCr_yO electrocatalyst that manifested exceptional OER stability in alkaline condition while improving the activity over time by dynamic self-restructuring. In 1 M KOH, Ni_xCr_yO required overpotentials of only 270 and 320 mV to achieve current densities of 100 and 500 mA cm⁻², respectively, with excellent long-term stability exceeding 475 h at 100 mA cm⁻² and 280 h at 500 mA cm⁻². The combination of electrochemical measurements and in situ studies revealed that leaching and redistribution of Cr during the prolonged electrolysis resulted in increased electrochemically active surface area. This eventually enhanced the catalyst porosity and improved OER activity. Ni_xCr_yO was further applied in real seawater from the Red Sea (without purification, 1 M KOH added), envisaging that the dynamically evolving porosity can offset the adverse active site-blocking effect posed by the seawater impurities. Remarkably, Ni_xCr_yO exhibited stable operation for 2000, 275 and 100 h in seawater at 10, 100 and 500 mA cm⁻², respectively. The proposed catalyst and the mechanistic insights represented a step towards realization of non-noble metal-based direct seawater splitting.     

Photodegradation and flow-injection determination of simetryn herbicide by luminol chemiluminescence detection

A novel and simple flow injection chemiluminescence method is reported for the determination of simetryn, a common herbicide. The method is based on the direct oxidation of luminol by the photoproducts of the simetryn in alkaline medium in the absence of catalyst/oxidant. The linear concentration range was 0.01 - 2 microg mL(-1) simetryn with a correlation coefficient (r(2)) of 0.9997 and relative standard deviations (RSD; n = 4) in the range of 0.9 - 2.3%. The limit of detection (S/N = 3) was 7.5 ng mL(-1) with a sample throughput of 100 h(-1). The proposed method has been applied to determine simetryn in natural waters using Sep-Pak C(18) cartridges for solid phase extraction (SPE) procedure. The recoveries were in the range of 97 +/- 1 to 104 +/- 2%. The mechanism of chemiluminescence reaction has also been discussed briefly.     

Relative efficacy of water use in five varieties of Abelmoschus esculentus (L.) Moench. under water-limited conditions

In the present investigation, five varieties of okra (Abelmoschus esculentus (L.) Moench.) were screened for their water use efficiency under two water regimes, viz., 60% and 100% filed capacity. Drought stress was imposed at 60% field capacity from 30 to 70 days after sowing, while the control pots were maintained at 100% field capacity throughout the period of entire growth. Biomass and yield, leaf area duration, cumulative water transpired water use efficiency, net assimilation rate, mean transpiration rate and harvest index under water deficit level were measured. Water use efficiency significantly increases in all the okra varieties under water-limited environment. Drought stress decreased the biomass and yield, leaf area duration, cumulative water transpired, net assimilation rate, mean transpiration rate and harvest index in the okra varieties studied. But among the varieties, variety JK Haritha showed better results. None of the varieties studied had showed increased drought tolerance than the control.     

Solid-state photochemical [2+2] cycloaddition in a hydrogen-bonded metal complex containing several parallel and crisscross C=C bonds

One-dimensional hydrogen-bonded complex [Zn(bpe)(2)(H(2)O)(4)](NO(3))(2).8/3 H(2)O.2/3 bpe (1, bpe=4,4'-bipyridylethylene) containing coordination complex cations [Zn(bpe)(2)(H(2)O)(4)](2+) with parallel and crisscross double bonds undergoes photochemical [2+2] cycloaddition in the solid state and produces tetrakis(4-pyridyl)cyclobutane (tpcb) in up to 100 % yield with rctt-tpcb (2a) as major and rtct-tpcb (2b) as minor product. The bpe ligands with crisscross conformation of C=C bonds appear to undergo pedal-like motion prior to photodimerization. Grinding single crystals to powder accelerates the pedal motion of crisscrossed olefins in the bpe ligands to parallel alignment and provides the rctt-cyclobutane stereoisomer 2a quantitatively. In addition, 100 % photodimerization of ground 1 indicates that the free bpe ligands, which are remote from each other in a pool of water, and NO(3)(-) ions moved toward each other to give a mixture of rctt- and rtct-tpcb isomers.     

Salinity stress enhances production of solasodine in Solanum nigrum L

Various in vitro grown tissues (non-regenerative callus, regenerative callus and microshoot derived leaves) of Solanum nigrum L. were cultured under salinity stress (0-150 mM NaCl) for enhanced production of solasodine, a steroidal alkaloid and an alternative to diosgenin, which is used as a precursor for the commercial production of steroidal drugs. The role of plant growth regulators and various concentrations of NaCl during in vitro production of solasodine was studied. The in vitro yield was compared with the yield from leaves of field grown plant. Solasodine content was maximum (2.39 mg/g dry wt.) in regenerative callus when grown on medium added with 150 mM NaCl; followed by in vitro raised leaf of microshoot. Quantitative estimation of solasodine was carried out using a new HPTLC method, which is validated for its recovery and precession. The proposed HPTLC method showed a good linear relationship (r(2)=0.994) in 50-2000 ng/spot concentration ranges. The data demonstrate that the solasodine production in cultures was growth dependent.     

New Epoxydammarane Triterpenes from Salvia santolinifolia

Three new 20,24‐epoxydammarane triterpenes, santolins A–C ( 1 – 3 ), were isolated from the AcOEt‐soluble fraction of the MeOH extract of Salvia santolinifolia (whole plant). Their structures were assigned based on ¹H‐NMR, ¹³C‐NMR (DEPT), and 2D‐NMR analyses, in combination with HR‐MS experiments and comparison with literature data of related compounds.     

Copolymerization of Carbonyl Sulfide and Propylene Oxide via a Heterogeneous Prussian Blue Analogue Catalyst with High Productivity and Selectivity

This study demonstrates the superiority of a stable and well-defined heterogeneous cobalt hexacyanocobaltate (Co₃[Co(CN)₆]₂), a typical cobalt Prussian Blue Analogue (CoCo-PBA) that catalyzes the copolymerization of carbonyl sulfide (COS) and propylene oxide (PO) to produce poly(propylene monothiocarbonate)s (PPMTC). The number-average molecular weights of the PPMTC were 66.4 to 139.4 kg/mol, with a polydispersity of 2.0–3.9. The catalyst productivity reached 1040 g polymer/g catalyst (12.0 h). The oxygen-sulfur exchange reaction (O/S ER), which would generate random thiocarbonate and carbonate units, was effectively suppressed, and thus the selectivity of the monothiocarbonate over carbonate linkages was up to >99%. It was shown that no cyclic thiocarbonate byproduct was produced during the heterogeneous catalysis of COS/PO copolymerization using CoCo-PBA as the catalyst. The content of monothiocarbonate and ether units in the copolymer chain could be regulated by tuning the feeding amount of COS.     

Typical conversion of lignocellulosic biomass into reducing sugars using dilute acid hydrolysis and alkaline pretreatment

The development and production of fossil fuel alternatives have become one of the main focal points in recent investigations. Lignocellulosic biomass is a renewable source of fermentable sugars for second-generation biofuels and chemicals via biotechnological pathways. However, the presence of lignin and hemicellulose in lignocellulosic biomass makes it difficult for the biomass to be hydrolyzed or digested during fermentation. Thus, effective biomass pretreatment is vital. The present review shows that chemical pretreatment is the current preferred method to obtain high sugar yields at low cost, with dilute acid and alkaline hydrolysis as the two most reported technologies. Dilute acid favours hydrolysis of the hemicelluloses whereas alkaline hydrolysis targets the lignin fraction. Both methods have merits and demerits, and have been combined with other treatments such as hydrothermal and enzymatic hydrolysis. Further investigation is required to improve the pretreatment processes and to ensure the economic viability of bioconversion.