The effect of heat treatments on the properties of Ti/Pt heating elements for gas sensor applications

Ti/Pt as heating element for gas sensor applications was fabricated on silicon (Si) wafer substrate. The fabricated device was subjected to heat treatment at different prescribed time periods for thermal stability. The energy dispersion spectroscopy (EDS) results of the device indicated that there were no Ti traces on the Pt surface after heat treatment at 450 °C for 3 and 4 h in an argon (Ar) atmosphere. A maximum temperature coefficient of resistance (TCR) with a value of 2.88×10^?3 K^?1 was obtained for the device with 3 h heat treatment.     

Acute oral toxicity and brine shrimp lethality of Elaeis guineensis Jacq., (oil palm leaf) methanol extract

Elaeis guineensis (Arecaceae) is widely used in West African traditional medicine for treating various ailments. An evaluation on the toxicity of extracts of this plant is crucial to support the therapeutic claims. The acute oral toxicity and brine shrimp lethality of a methanolic extract of this plant was tested. Oral administration of crude extract at the highest dose of 5,000 mg/kg resulted in no mortalities or evidence of adverse effects, implying that E. guineensis is nontoxic. Normal behavioral pattern, clinical signs and histology of vital organs confirm this evidence. The E. guineensis extracts screened for toxicity against brine shrimp had 50% lethal concentration (LC??) values of more than 1.0 mg/mL (9.00 and 3.87 mg/mL, at 6 and 24 h, respectively), confirming that the extract was not toxic. Maximum mortalities occurred at 100 mg/mL concentration while the least mortalities happened to be at 0.195 mg/mL concentration. The results of both tests confirm that E. guineensis is nontoxic and hence safe for commercial utilization.     

Analysis of the cellular Aspergillus fumigatus proteome that reacts with sera from rabbits developing an acquired immunity after experimental aspergillosis

Invasive aspergillosis caused by the mould Aspergillus fumigatus is a life‐threatening lung or systemic infection in the immunocompromised host. In this study, a protective immune response against the disease was achieved in two infected rabbits, and the cellular fungal antigenic proteome that mediated such a response was investigated against the background of vaccine development efforts. Altogether, 59 different Aspergillus proteins were found becoming reactive in the course of the developing immunity, many of which are described in this context for the first time. These included proteins related to oxidative stress management, glycolysis and other metabolic pathways. As oxidative stress is suspected to be one of the major defense mechanisms, the results may indicate at least in part a continuous response of the pathogen to evade the host's immune system. In addition, proteins with suspected cell surface association or crucial function for fungal cell development were identified. As these antigens are newly recognized during the process of the developing immunoprotection, they may not only represent valuable infection markers but also importantly broaden the list of possible vaccine candidates.     

Effect of radiation process on antinutrients and HCl extractability of calcium,phosphorus and iron during processing and storage

Whole and dehulled flours of millet cultivars Ashana and Dembi were stored for 30 and 60 days before and after radiation and/or cooking. Phytic acid and polyphenols contents were assayed for all treatments. The results revealed that the storage period was found to have no effect on phytate and polyphenols contents. Moreover, dehulling of the grains reduced more than 50% of phytate and polyphenols of both cultivars. Cooking of the raw whole and dehulled flour significantly (P≤0.05) reduced phytate and polyphenols contents for both cultivars. Radiation process alone had no effect on phytate and polyphenols contents but when followed by cooking significantly (P≤0.05) reduced the level of such antinutrients for the whole and dehulled flour of both cultivars. Dehulling alone significantly (P≤0.05) decreased Ca and P content but slightly decreased Fe content. Radiation alone or in combination with cooking was found to have slight effect on minerals content of the whole and dehulled raw flour for both cultivars. Cooking alone or in combination with radiation of whole or dehulled raw flour significantly (P≤0.05) improved the extractable Ca but had no significant (P≤0.05) effect on extractable P and Fe for both cultivars.     

Finite volume based CFD simulation of pressurized flip-chip underfill encapsulation process

This paper presents the simulation of pressurized underfill encapsulation process for high I/O flip chip package. 3D model of flip chip packages is built using GAMBIT and simulated using FLUENT software. Injection methods such as central point, one line, L-type and U-type are studied. Cross-viscosity model and volume of fluid (VOF) technique are applied for melt front tracking of the encapsulant. The melt front profiles and pressure field for all injection types are analyzed and presented. The pressure distribution within the flip-chip, fill volume versus filling time and viscosity versus shear rate are also plotted. The U-type injection is found to be faster in filling. The numerical results are compared with the previous experimental results and found in good conformity. The strength of CFD software in handling underfill encapsulation problems is proved to be excellent.     

A Validated LC Method for the Quantitation of Cefotaxime in pH-Sensitive Nanoparticles

A sensitive and rapid routine LC method was validated for measuring cefotaxime incorporated in three different pH-sensitive nanoparticles. The drug was chromatographed on a C18 reversed-phase column; the mobile phase used was 0.05 M aqueous ammonium acetate, acetonitrile and tetrahydrofuran (87:11:2, v/v) adjusted to pH 5.5 with acetic acid. The flow rate was 1 mL min^?1 and cefotaxime was quantified at 254 nm, with a sensitivity range of 0.005 AUFS. The validated method was specific, linear (R ² ≥ 0.999), precise and accurate in a concentration range of 0.2–50.0 μg mL^?1. The method was rapid, selective and suitable for evaluation of cefotaxime in pH-sensitive Eudragit nanoparticles.     

不同堆构条件下颗粒柱有效质量的涨落

利用静态颗粒特性实验仪研究了不同堆构条件下颗粒柱有效质量的涨落.发现当只有一种颗粒堆构时涨落随着颗粒柱与颗粒的直径比的增大而减小,除此之外,当有不同颗粒堆构时涨落还随着不同大小颗粒的堆构位置而变化,可将这种现象的机理归结为颗粒柱中的颗粒数量的异同以及颗粒柱与限界之间摩擦力方向的不确定性.     

Controlled coupling of a single nitrogen-vacancy center to a silver nanowire

We report on the controlled coupling of a single nitrogen-vacancy (NV) center to a surface plasmon mode propagating along a chemically grown silver nanowire (NW). We locate and optically characterize a single NV center in a uniform dielectric environment before we controllably position this emitter in the close proximity of the NW. We are thus able to control the coupling of this particular emitter to the NW and directly compare the photon emission properties before and after the coupling. The excitation of single plasmonic modes is witnessed and a total rate enhancement by a factor of up to 4.6 is demonstrated.     

Self-consistent treatment of spin and magnetization dynamic effect in spin transfer switching

The effect of itinerant spin moment (m) dynamic in spin transfer switching has been ignored in most previous theoretical studies of the magnetization (M) dynamics. Thus in this paper, we proposed a more refined micromagnetic model of spin transfer switching that takes into account in a self-consistent manner of the coupled m and M dynamics. The numerical results obtained from this model further shed insight on the switching profiles of m and M, both of which show particular sensitivity to parameters such as the anisotropy field, the spin torque field, and the initial deviation between m and M.     

Milling time and BPR dependence on permeability and losses of Ni0.5Zn0.5Fe2O4 synthesized via mechanical alloying process

Ni_0.5Zn_0.5Fe₂O₄ has been synthesized using mechanical alloying method with two variables (milling time and ball-to-powder weight ratio (BPR)) were varied in order to study its effect on the magnetic properties of the material. The effects of these two variables were studied using XRD, SEM, TEM and later by impedance analyzer with the frequency range from 1 MHz to 1.8 GHz. The results obtained however show that there are no significant trends to relate the milling time and BPR with the permeability and losses of the material studied. After being sintered at 1150 °C, all the effects of alloying process seem to diminish.