Least-Square Collaborative Beamforming Linear Array for Steering Capability in Green Wireless Sensor Networks

This paper presents a collaborative beamforming (CB) technique to organize the sensor node's location in a linear array for green wireless sensor network (WSN) applications. In this method, only selected clusters and active CB nodes are needed each time to perform CB in WSNs. The proposed least-square linear array (LSLA) manages to select nodes to perform as a linear antenna array (LAA), which is similar to and as outstanding as the conventional uniform linear array (ULA). The LSLA technique is also able to solve positioning error problems that exist in the random nodes deployment. The beampattern fluctuations have been analyzed due to the random positions of sensor nodes. Performances in terms of normalized power gains are given. It is demonstrated by a simulation that the proposed technique gives similar performances to the conventional ULA and at the same time exhibits lower complexity.     

Silica aerogel–poly(ethylene‐co‐vinyl acetate) composite for transparent heat retention films

Poly(ethylene‐co‐vinyl acetate) (EVA) plastic films are widely used for solar coverings including photovoltaic modules and commercial greenhouse films, but are poor at controlling heat flow. In this work, silica aerogel (SA) nanogels were examined for preparing transparent heat retention EVA films that block far infrared spectra radiation to maintain heat, without compromising the optical performance of the films. SA nanogels were melt‐mixed using a mini twin‐screw extruder with EVA pellets to form SA/EVA composite, which were pressed into thin films with controlled thickness. The composite films were characterized in terms of optical properties using a variety of analytical methods including FTIR, UV–Vis spectroscopy, electron, confocal, and atomic force microscopy. Both thermicity and thermal conductivity of commercial and experimental SA/EVA films were measured. The results demonstrated that the SA/EVA films gave improved infrared retention compared to commercial thermal plastic films without compromising visible light transmission, showing the potential for this approach in next generation heat retention films. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 927–935     

Quantification of Cannabinoids in Cultivars of Cannabis sp. by Gas Chromatography–Mass Spectrometry

Chromatographia - In the chemical characterization of medically valued Cannabis, the present work has used a gas chromatography (GC) method coupled with mass spectrometry (MS) for identification...     

Homotopy analysis method for fractional IVPs

In this paper, the homotopy analysis method is applied to solve linear and nonlinear fractional initial-value problems (fIVPs). The fractional derivatives are described by Caputo’s sense. Exact and/or approximate analytical solutions of the fIVPs are obtained. The results of applying this procedure to the studied cases show the high accuracy and efficiency of the approach.     

X-ray diffraction studies on crystallite size evolution of CoFe2O4 nanoparticles prepared using mechanical alloying and sintering

Nanosized cobalt ferrite spinel particles have been prepared by using mechanically alloyed nanoparticles. The effects of various preparation parameters on the crystallite size of cobalt ferrite which includes milling time; ball-to powder weight ratio (BPR) and sintering temperature, were studied using X-ray diffractometer (XRD). Scherrer's equation was used to study the crystallite size evolution of the as-prepared materials. The results of the as-milled sample revealed that both milling time and BPR plays a role in determining the crystallite size of the milled powder. However, where sintering is involved, the sintering temperature results in grain growth, and thus plays a dominant role in determining the final crystallite size of the samples sintered at higher temperature (above 900 °C). From the vibrating-sample magnetometer (VSM) measurement it was observed that the coercivity of the as-milled samples without sintering is almost negligible, which is a type characteristic of superparamagnetic material. However, for the sintered samples, the saturation increases while coercivity decreases with increases sintering temperature.     

Small and Moderate Prandtl Number Chaotic Convection in Porous Media in the Presence of Feedback Control

Feedback control on thermal convection in a fluid-saturated porous medium is investigated based on the dynamical systems approach. A low dimensional Lorenz-like model was obtained using the Galerkin-truncated approximation. The possible suppression or enhancement of chaotic convection is demonstrated when the fluid layer is subjected to feedback control in a low-dimensional framework.     

Low operating temperature of oxygen gas sensor based on undoped and Cr-doped ZnO films

Undoped and doped ZnO with 1 at.% (atomic percentage) chromium (Cr) was synthesized by RF reactive co-sputtering for oxygen gas sensing applications. The prepared films showed a highly c-oriented phase with a dominant (0 0 2) peak at a Bragg angle of around 34.2°. The operating temperature of the prepared ZnO sensor was around 350 °C and shifted to around 250 °C for the doped ZnO sensor which is lower than that of previously reported work. The sensitivity of the sensor toward oxygen gas was enhanced by doping ZnO with 1 at.% Cr. Good stability and repeatability of the sensor were demonstrated when tested under different concentration of oxygen atmosphere.     

Optimized Reliable Hybrid Routing Protocol Based Link Stability for Mobile Wireless Networks

Wireless Personal Communications - During the last two decades, there has been a tremendous growth in the use of MANETs, not only due to the development of the technology but also due to their high...     

Photopyroelectric spectroscopy of Sb<Subscript>2</Subscript>O<Subscript>3</Subscript> - ZnO ceramics

Photopyroelectric spectroscopy is used to study the band-gap energy of the ceramic (ZnO + xSb₂O₃), x = 0.1 - 1.5 mol% and the ceramic (ZnO + 0.4 mol%  Bi₂O₃ + xSb₂O₃), x = 0 - 1.5 mol% sintered at isothermal temperature, 1280 °C, for 1 and 2 hours. The wavelength of incident light, modulated at 9 Hz, is kept in the visible range and the photopyroelectric spectrum with reference to doping level is discussed. The band-gap energy is reduced from 3.2 eV, for pure ZnO, to 2.86, 2.83 eV for the samples without Bi₂O₃at 0.1 mol% of Sb₂O₃ for 1 and 2 hours of sintering time, respectively. It is reduced to 2.83, 2.80 eV for the samples with Bi₂O₃ at 0 mol% of Sb₂O₃ for 1 and 2 hours of sintering time, respectively. The steepness factor σ_A which characterizes the slop of exponential optical absorption is discussed with reference to the doping level. The phase constitution is determined by XRD analysis; microstructure and compositional analysis of the selected areas are analyzed using SEM and EDX.