Experimental Study of Effect of Temperature Variations on the Impedance Signature of PZT Sensors for Fatigue Crack Detection

Structural health monitoring (SHM) is recognized as an efficient tool to interpret the reliability of a wide variety of infrastructures. To identify the structural abnormality by utilizing the electromechanical coupling property of piezoelectric transducers, the electromechanical impedance (EMI) approach is preferred. However, in real-time SHM applications, the monitored structure is exposed to several varying environmental and operating conditions (EOCs). The previous study has recognized the temperature variations as one of the serious EOCs that affect the optimal performance of the damage inspection process. In this framework, an experimental setup is developed in current research to identify the presence of fatigue crack in stainless steel (304) beam using EMI approach and estimate the effect of temperature variations on the electrical impedance of the piezoelectric sensors. A regular series of experiments are executed in a controlled temperature environment (25°C–160°C) using 202 V1 Constant Temperature Drying Oven Chamber (Q/TBXR20-2005). It has been observed that the dielectric constant ε₃₃^T which is recognized as the temperature-dependent constant of PZT sensor has sufficiently influenced the electrical impedance signature. Moreover, the effective frequency shift (EFS) approach is optimized in term of significant temperature compensation for the current impedance signature of PZT sensor relative to the reference signature at the extended frequency bandwidth of the developed measurement system with better outcomes as compared to the previous literature work. Hence, the current study also deals efficiently with the critical issue of the width of the frequency band for temperature compensation based on the frequency shift in SHM. The results of the experimental study demonstrate that the proposed methodology is qualified for the damage inspection in real-time monitoring applications under the temperature variations. It is capable to exclude one of the major reasons of false fault diagnosis by compensating the consequence of elevated temperature at extended frequency bandwidth in SHM.     

Novel amide derivatives of 3-phenylglutaric acid as potent soluble epoxide hydrolase inhibitors

Molecular Diversity - Soluble epoxide hydrolase (sEH) enzyme plays an important role in the metabolism of endogenous chemical mediators, epoxyeicosatrienoic acids, which are involved in the...     

Multinuclear (Sn/Pd) complexes with disodium 2,2′-(dithiocarboxyazanediyl)diacetate hydrate; Synthesis,characterization and biological activities

Bimetallic chlorodi-/triorganotin(IV) derivatives of general formulas R₂(H₂O)SnLCSSSn(Cl)R₂ (R=Me: 1; Ph: 2) and R₃Sn(Na)LCSSSnR₃·H₂O (R=Bu: 3; Ph: 4) were prepared by reaction of iminodiacetic acid disodium salt hydrate (Na₂LH) with CS₂ and R₂SnCl₂/R₃SnCl in methanol. The reaction between Na₂LH, CS₂, and PdCl₂ produced [Na₂LCSS]₂Pd·2H₂O (5) which was treated with R₃SnCl to synthesize the heterobimetallic derivatives [R₃Sn(Na)LCSS]₂Pd·2H₂O (R=Me: 6; Ph: 7). The complexes were characterized by microanalysis, spectroscopic, and thermogravimetric analyses. Elemental analysis data, mass fragmentation, and thermal degradation patterns supported the molecular composition of the complexes. FT-IR data indicated monodentate binding of carboxylate while a chelating coordination mode of the dithiocarboxylate was verified in the solid state. A five-coordinate tin(IV) was demonstrated in the solid state. In solution, a tetrahedral/trigonal bipyramidal configuration around Sn(IV) and a square planar geometry of Pd(II) was indicated by multinuclear NMR (¹H and ¹³C) and UV-visible studies. The Pd(II) derivatives showed interaction with salmon sperm-DNA and caused an inhibition of alkaline phosphatase (ALPs). The antibacterial/antifungal potential of the coordination products varied with the nature of incorporated metal and a substitution pattern at tin(IV); the palladium metallation decreased the antimicrobial activities. The triorganotin(IV) products exhibited more powerful action against bacteria/fungi as compared to their diorganotin(IV) counterparts. The complexes displayed sufficiently lower hemolytic effects in vitro as compared to triton X-100 and slightly higher than PBS.     

CoFe2O4纳米阵列催化剂的费托合成性能研究

通过可控的水热生长方法和钴铁碳酸根氢氧根水合物的焙烧在泡沫铁上制备了CoFe₂O₄纳米阵列催化剂。通过粉末X射线衍射,扫描电镜和电感耦合等离子体发射光谱表征了CoFe₂O₄纳米阵列的晶相,结构和组成。制备的催化剂被用于费托合成性能研究。CoFe₂O₄纳米阵列催化剂在5L/（g·h）的空速下具有69%的转化率,并且其性能优于粉体催化剂。     

Preconcentration and spectrophotometric determination of low concentrations of malachite green and leuco-malachite green in water samples by high performance solid phase extraction using maghemite nanoparticles

A novel and sensitive extraction procedure using maghemite nanoparticles (γ-Fe₂O₃) modified with sodium dodecyl sulfate (SDS), as an efficient solid phase, was developed for removal, preconcentration and spectrophotometric determination of trace amounts of malachite green (MG) and leuco-malachite green (LMG). Combination of nanoparticle adsorption and easily magnetic separation was used to extraction and desorption of MG and LMG. The adsorption capacity was evaluated using both the Langmuir and Freundlich adsorption isotherm models. Maghemite nanoparticles were prepared by co-precipitation method and their surfaces were modified by SDS. The size and properties of the produced maghemite nanoparticles was determined by X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM) and BET analysis. MG and LMG became adsorbed at pH 3.0. LMG was oxidized to MG by adsorption on maghemite nanoparticles. The adsorbed MG was then desorbed and determined spectrophotometrically. The calibration graph was linear in the range 0.50-250.00 ng mL⁻¹ of MG and LMG with a correlation coefficient of 0.9991. The detection limit of the method for determination of MG was 0.28 ng mL⁻¹ and the relative standard deviation (R.S.D.) for 10.00 and 50.00 ng mL⁻¹ of malachite green was 1.60% (n = 3) and 0.86% (n = 5), respectively. A preconcentration factor of 50 was achieved in this method. The Langmuir adsorption capacity (q_max) was found to be 227.3 mg g⁻¹ of the adsorbent. The method was applied to the determination of MG in fish farming water samples.     

Ultrasensitive Simultaneous Quantification of Nanomolar Level of Cd and Zn by Cathodic Adsorptive Stripping Voltammetry in Some Real Samples

A novel, simple and sensitive adsorptive stripping voltammetry method was developed for simultaneous determination of Cd and Zn using N‐Nitrozo‐N‐phenylhydroxylamine (Cupferron) as a selective complexing agent. Cadmium and zinc metals gave peaks that were distinctly separated by 450–1200 mV, allowing their determination over a wide range of concentrations. The influence of pH and the nature of supporting electrolytes, concentration of ligand, preconcentration time and applied potential were investigated. The detection limits were 0.058 ng/mL for Zn and 0.092 ng/mL for Cd, and the RSD at a concentration level of 50 ppb, were 1.8–2.1 % for both zinc and cadmium, respectively. The method was applied to the determination of cadmium and zinc in blood, drug, food and water samples with the satisfactory results.     

Multicarrier constant envelope OFDM signal design for radar applications

Orthogonal frequency division multiplexing (OFDM) radar signals have been introduced for high range resolution radars. These signals have prominent properties such as favorable ambiguity function, high bandwidth efficiency, and possibility of use in dual mode radar/communication systems. But the large amplitude fluctuations of the OFDM signal make it susceptible to system nonlinearities. To alleviate this problem, constant envelope OFDM (CE-OFDM) signal has been introduced which combines orthogonal frequency division multiplexing and phase modulation or frequency modulation. Although several works have been reported on OFDM radar signal design, there is no a systematic approach for designing CE-OFDM signals for radar applications. In this paper we will focus on CE-OFDM signal design for radar applications. Two different methods for designing a CE-OFDM signal with favorable ambiguity functions are introduced. The first one is based on modulating a complementary set of sequences on different sub-carriers while the second is based on using a proper single carrier coded signal and then extracting its most similar multicarrier OFDM or CE-OFDM coded signal.     

New coumarin-hemiterpene ether glucosides and a structurally related phenylpropanoic acid derivative from Artemisia armeniaca

Two new coumarin-hemiterpene ether glucosides, 4'-O-(beta-D-glucopyranosyl) desoxylacarol (1), and 5-O-(beta-D-glucopyranosyl) lacarol (2), were isolated from the methanolic extract of the aerial parts of Artemisia armeniaca Lam. Their structures were established by means of spectroscopic analysis including 1H- and 2D-NMR, HRESIMS, and acid hydrolysis. In addition, a structurally related phenylpropanoic acid derivative (3) was obtained in small amounts, and its structure tentatively assigned as 3-(4-hydroxy-3-methylbutoxy)-4-methoxy melilotic acid.     

Influence of gamma radiation on the colour strength and fastness properties of fabric using turmeric (Curcuma longa L.) as natural dye

The effect of gamma radiation on the dyeing of cotton with extract of turmeric (Curcuma longa L.) powder has been investigated. Cotton fabric and turmeric powder were irradiated to absorbed doses of 1, 2, 3, 4 and 6 kGy using Co-60 gamma irradiator. Dyeing parameters such as temperature, pH and mordant concentration were optimized. Dyeing was performed using un-irradiated and irradiated cotton with the extracts of un-irradiated and irradiated turmeric powder in order to investigate the effect of radiation treatment on the colour strength of dyed fabric. The reported data of un-irradiated and irradiated fabrics dyed with un-irradiated and irradiated dyes were obtained using the spectraflash SF-650. The colourfastness to light, rubbing- and washing-fastness properties showed that gamma irradiation has improved the dyeing characteristics from fair to good.