Performance improvement of OFDM systems using compressive sensing with group LASSO signal reconstruction algorithm

Wireless Networks - Orthogonal frequency division multiplexing (OFDM) has been investigated for the high-speed transmission of data in radio frequency and optical wireless communications. The OFDM...     

Wet carbon-based solid acid/NaNO_3 as a mild and efficient reagent for nitration of aromatic compound under solvent free conditions

Nitro aromatic compound can be obtained in high yields via nitration of aromatic compound with wet carbon-based solid acid and NaNO_3 under solvent free oxidation at room temperature.     

An efficient and chemoselective method for protection of thiols catalyzed by aluminumdodecatungstophosphate (AlPW12O40), as a highly water tolerant Lewis acid catalyst

Protection of various thiols with diphenylmethanol was achieved in high yields at room temperature using catalytic amounts of AlPW₁₂O₄₀ in CH₂Cl₂. In the presence of this catalyst, protection of SH versus OH was achieved with high chemoselectivity and yields. The catalyst can be easily recovered and reused. Deprotection of DPM thioethers was also achieved using molecular iodine at reflux in CH₂Cl₂ in high yields.     

Photocatalytic ozonation degradation of ciprofloxacin using ZnO nanoparticles immobilized on the surface of stones

Ciprofloxacin is used in the treatment of bacterial infections. Because ciprofloxacin is not effectively degraded by biological processes, advanced oxidation processes such as photocatalytic ozonation are applied to remove this antibiotic from wastewater. The aim of this study was to investigate photocatalytic ozonation for the removal of ciprofloxacin from aquatic environments and optimization of the effective parameters of the process. For this purpose, ZnO nanoparticles were synthesized using the thermal method and immobilized on the surface of stones. The structural properties of the nanoparticles were determined by XRD, TEM, Photoluminescence (PL) and SEM. Experiments were carried out in a Plexiglas reactor supported with the continuous injection of ozone. The effective parameters for removal efficiency were reaction time, initial concentration of ciprofloxacin, pH, photocatalyst concentration and reaction kinetics. The highest ciprofloxacin removal efficiency occurred at the following optimal conditions: pH of 7, reaction time of 30?min, photocatalyst concentration of 3?g/L and initial ciprofloxacin concentration of 10?mg/L. Removal efficiency of 96% was obtained under these conditions. Linear kinetic models showed that the process followed pseudo-first order and Langmuir-Hinshelwood kinetics. This process had a high removal efficiency and suitable for removal of ciprofloxacin from aquatic environments.GRAPHICAL ABSTRACT     

An Easy One-Pot Procedure for the Synthesis of <Emphasis Type="Italic">N</Emphasis>-Sulfonyl Phosphorous Ylides and Sulfonyl Iminophosphoranes

Summary. Reaction of triphenylphosphine and an electron deficient acetylenic ester in the presence of strong N–H acid such as alkyl and aryl sulfamides or acetamide produces phosphorous ylides at room temperature in CH₂Cl₂. The aryl sulfamide phosphoranes undergo a smooth transformation reaction in boiling toluene and produce iminophosphoranes.     

Energy dispersive X-ray fluorescence analysis of chloride in reforming catalysts

A relatively less expensive Phillips PV 9500/SY 585 automatic energy dispersive X-ray fluorescence (EDXFR) spectrometer with rhodium target, was modified using a commercial kitchen aluminium wrapping foil filter, for the determination of chloride in bifunctional reforming catalysts. Quantitation of chloride was carried out by the Claisse-Quintin method with a catalyst sample of known chloride content as an external standard. The results of EDXRF chloride analysis of different catalyst samples, containing varying amounts of percent carbon and chloride, compared well (p>0.75) with those obtained by silver chloride precipitation method. The small values of percent relative standard deviations at 0.4 to 4.5% showed a good reproducibility of the method. With the total analysis time of a few minutes combined with no sample preparation, the present method seems to be superior as compared to presently employed methods of chloride analysis in reforming catalysts.     

Synthesis of 11C-amides using [11C]carbon monoxide and in situ activated amines by palladium-mediated carboxaminations

[11C]Carbon monoxide at low concentrations, aryl halides and amines were used in the palladium-mediated synthesis of twenty 11C-amides. In the study several approaches to improve the radiochemical yield were explored. Eight of the selected amides were prepared by in situ activation of the amines using lithium bis(trimethylsilyl)amide and the radiochemical yields of these reactions were improved compared to utilising a previous reported method. In the synthesis of 1-[carbonyl-11C]benzoyl-3-methyl-1H-indole (11) from 3-methyl-1H-indole (25), the corresponding organotin-amine was prepared prior to the acylation reaction. In a typical experiment, N-(4-hydroxyphenyl)[carbonyl-11C]acetamide (5) was prepared in 15% radiochemical yield using 4-aminophenol (20) but the yield increased to 63% when the amine was activated by lithium bis(trimethylsilyl)amide.     

Indirect Determination of Sulfide by Cold Vapor Atomic Absorption Spectrometry

A method for the determination of sulfide based on its interference with the determination of Hg by cold vapor atomic absorption spectrometry is described. The decrease in mercury absorbance at 253.7nm is proportional to the concentration of sulfide over the range of 10–320ngmL^–1. The limit of detection was found to be 7ngmL^–1 and the relative standard deviation (R.S.D.) for the determination of different concentrations of sulfide was in the range of 1.8–2.2%. This method was applied to the determination of sulfide in whole human blood after gas-phase separation.     

Quantitative determination of Malathion in pesticide by modified attenuated total reflectance-Fourier transform infrared spectrometry applying genetic algorithm wavelength selection method

A simple and environment friendly method was developed for determination of Malathion content of analytical and commercial insecticide samples with no special preparation. Attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectra were characterized and 1000-2000 cm⁻¹ region was selected for quantitative analysis utilizing partial least square (PLS) and two wavelength selection methods: (a) principal component regression (PCR) and (b) genetic algorithm (GA). Relative error of prediction (REP) was calculated in PLS, PCR-PLS and GA-PLS methods and was 3.536, 1.656 and 0.188, respectively. Proposed method is successfully applicable for quantification of Malathion in commercial grade samples and reliable results in comparison with known methods, confirms this idea.