超临界CO2法制备头孢唑啉钠脂质体

采用超临界CO2(scCO2)流体代替有机溶剂一步法制备了头孢唑啉钠药物载体脂质体. 研究了该脂质体的尺寸、稳定性和药物的包封率. 结果表明, 脂质体的尺寸和稳定性依赖于制备压力, 脂质体对头孢唑啉钠的包封率与乙醇和脂浓度有关, 采用超临界CO2法制备脂质体的药物包封率比采用薄膜分散法(Bangham method)制备的包封率高.     

A Facile Three-Component One-Pot Synthesis of Structurally Constrained Tetrahydrofurans, Which Are t-RNA Synthetase Inhibitor Analogues

A one-pot procedure for the efficient synthesis of a small library of t-RNA inhibitor analogues was developed. Thus,Rh2(OAc)4 catalyzed three-component 1,3-dipolar cycloaddition reactions of carbonyl ylides derived from diazoindan-1,3-dione and aldehydes with other dipolarophiles in 1,1,2,2-tetrachloroethane at 80 ℃ gave ring fused tetrahydrofurans having three stereocenters in good yield.     

高效液相色谱-串联质谱法结合多糖衍生物手性固定相拆分氰戊菊酯

建立了以多糖衍生物为手性固定相的高效液相色谱-串联质谱(HPLC-MS/MS)直接拆分氰戊菊酯对映体的方法。在反相液相色谱条件下,考察了手性固定相的种类、流动相组成、柱温、流速对氰戊菊酯4个立体异构体分离的影响。同时,利用热力学方法对氰戊菊酯的立体异构体与固定相之间的色谱保留和分离的热力学机理进行了探讨。结果表明:采用Lux Cellulose-3(纤维素-三(4-甲基苯甲酸酯))手性色谱柱,在以流动相为乙腈-水(5 mmol/L甲酸铵)=(55:45,V:V)流速0.4 mL/min,柱温30℃的条件下,可在14 mins内实现氰戊菊酯4个立体异构体的基线分离。拓展了HPLC-MS/MS在菊酯类手性农药对映体分离及检测上的应用。     

The electronic structure of FeV-cofactor in vanadium-dependent nitrogenase

The electronic structure of the active-site metal cofactor (FeV-cofactor) of resting-state V-dependent nitrogenase has been an open question, with earlier studies indicating that it exhibits a broad S = 3/2 EPR signal (Kramers state) having g values of ∼4.3 and 3.8, along with suggestions that it contains metal-ions with valencies [1V³⁺, 3Fe³⁺, 4Fe²⁺]. In the present work, genetic, biochemical, and spectroscopic approaches were combined to reveal that the EPR signals previously assigned to FeV-cofactor do not correlate with active VFe-protein, and thus cannot arise from the resting-state of catalytically relevant FeV-cofactor. It, instead, appears resting-state FeV-cofactor is either diamagnetic, S = 0, or non-Kramers, integer-spin (S = 1, 2 etc.). When VFe-protein is freeze-trapped during high-flux turnover with its natural electron-donating partner Fe protein, conditions which populate reduced states of the FeV-cofactor, a new rhombic S = 1/2 EPR signal from such a reduced state is observed, with g = [2.18, 2.12, 2.09] and showing well-defined ⁵¹V (I = 7/2) hyperfine splitting, a_iso = 110 MHz. These findings indicate a different assignment for the electronic structure of the resting state of FeV-cofactor: S = 0 (or integer-spin non-Kramers state) with metal-ion valencies, [1V³⁺, 4Fe³⁺, 3Fe²⁺]. Our findings suggest that the V³⁺ does not change valency throughout the catalytic cycle.

Active site FeV-cofactor of the V-nitrogenase and the EPR spectrum of the reduced cofactor showing ⁵¹V-hyperfine coupling.     

2,2'-二乙炔基-1,1'-联萘为模板构筑的新的环芳化合物的合成及其光学性质

基于2,2'-二取代的联萘衍生物在手性构型上高度稳定的特点,分别以光学活性的(R)-和(S)-2,2'-二乙炔基-1,1'-联萘为模板,设计了2个有趣的拓扑环芳分子四联萘笼状对映异构体(R,R,R,R)-2和(S,S,S,S)-2.其合成路线涉及保护基的控制导入、苯连接桥的链接、保护基的脱去以及偶合成环反应4个步骤.用MS,IR,UV-Vis,1HNMR,13CNMR和元素分析等技术对其进行了表征,并比较了其光学性质.研究结果表明,采用这种模板合成方法能够有效地获得具有单一手性的目标化合物.镜像特征的圆二色(CD)谱和比旋光度[α]D的测定结果清楚地反映了它们的对映异构关系.     

Zn-Al-Ce三元类水滑石的制备及性质研究

采用共沉淀法，水热合成层状化合物一硝酸根柱撑锌铝铈三元类水滑石，分别测定了各种单一金属盐溶液及M^2 ／M^3 摩尔比为2，Ce^3 ／Al^3 摩尔比为0．25的混合金属盐的NaOH滴定曲线，并利用XRD对不同条件下合成产物进行物相分析。实验结果表明：在M^2 ／M^2 =2，Ce^3 ／Al^3 =0．07～0．50，pH=5．8～6．5条件下进行多种离子共沉淀，并经120℃、6h水热处理后，均能合成结构单一的ZnAlCe—HTLLcs，利用TG—DTlA、FT—IR、ICP对合成物进行了表征，筛选出适宜的合成条件，并对HTLcs层状结构的热行为进行初步研究，结果表明ZnAlCe—HTLcs热稳定性较差，层间结合水、层板羟基及层间客体物种(NO3^-)失去温度在240℃左右，易于转化为复合氧化物，将此复合氧化物应用于NO的催化?肖除反应，680℃下NO的转化率高达近100％。     

A new Sequiterpenoid from Eupatorium adenophorum Spreng

A new sequiterpenoid compound 8aα-hydroxy-1-isopropyl-4,7-dimethyl-1,2,3,4,6,8a-hexahydro-naphthalene-2,6-dione(1),together with seven known compounds anti-HH-dimer-coumarin(2),(-)-5-exo-hydroxy-bomeol(3),O-hydroxyl cinnamic acid(4),9β-hydroxy-ageraphorone(5),10Hα-9-oxo-ageraphorone(6),10Hβ-9-oxo-ageraphorone(7)and 9-oxo-10,11-dehydroageraphorone 8,was isolated from the leaves of Eupatorium adenopho-rum Spreng.The structures were elucidated by IR,~1H and ~(13)C NMR,EIMS,HMBC and single-crystal X-ray spec-tral data.     

Enhancement of signal-to-noise level by synchronized dual wavelength modulation for light emitting diode fluorimetry in a liquid-core-waveguide microfluidic capillary electrophoresis system

The signal-to-noise level of light emitting diode (LED) fluorimetry using a liquid-core-waveguide (LCW)-based microfluidic capillary electrophoresis system was significantly enhanced using a synchronized dual wavelength modulation (SDWM) approach. A blue LED was used as excitation source and a red LED as reference source for background-noise compensation in a microfluidic capillary electrophoresis (CE) system. A Teflon AF-coated silica capillary served as both the separation channel and LCW for light transfer, and blue and red LEDs were used as excitation and reference sources, respectively, both radially illuminating the detection point of the separation channel. The two LEDs were synchronously modulated at the same frequency, but with 180°-phase shift, alternatingly driven by a same constant current source. The LCW transferred the fluorescence emission, as well as the excitation and reference lights that strayed through the optical system to a photomultiplier tube; a lock-in amplifier demodulated the combined signal, significantly reducing its noise level. To test the system, fluorescein isothiocyanate (FITC)-labeled amino acids were separated by capillary electrophoresis and detected by SDWM and single wavelength modulation, respectively. Five-fold improvement in S/N ratio was achieved by dual wavelength modulation, compared with single wavelength modulation; and over 100-fold improvement in S/N ratio was achieved compared with a similar LCW-CE system reported previously using non-modulated LED excitation. A detection limit (S/N = 3) of 10 nM FITC-labeled arginine was obtained in this work. The effects of modulation frequency on S/N level and on the rejection of noise caused by LED-driver current and detector were also studied.     

离子液体中电沉积制备钴纳米线阵列

Porous anodic alumina (PAA) was used as a template to prepare Co nanowires array from 1-ethyl-3-methylimidazolium chloride ionic liquid by direct current method. The surface morphology of porous anodic alumina template was observed by field emission-scanning tunneling microscopy (FE-SEM) before and after the electrodeposition of Co nanowires. The electrodeposition of Co nanowires was characterized by transmission electron microscopy (TEM) and X-ray powder diffraction (XRD). TEM results indicate that the Co nanowire surface is coarse and porous when aqueous solution was used as electrolyte， and the Co nanowire deposited from the ionic liquid is uniform and smooth. XRD results show that the electrodeposition of Co is a mixture of crystal and microcrystal phase.     

聚丙烯酸-b-聚(N-异丙基丙烯酰胺)嵌段共聚物的合成及其温度和pH值敏感性自组装研究

通过原子转移自由基聚合方法, 在丁酮/异丙醇混合溶剂中合成了分子量可控和分布较窄的聚丙烯酸叔丁酯-b-聚N-异丙基丙烯酰胺(PtBA-b-PNIPAM)嵌段共聚物, 用GPC和 1 H NMR对其结构进行了表征. PtBA-b-PNIPAM在甲苯中水解得到聚丙烯酸-b-聚N-异丙基丙烯酰胺(PAA-b-PNIPAM). 用动态光散射技术对PAA-b-PNIPAM在水溶液中的自组装行为随pH值和温度变化的响应进行了初步研究.