离子液体中电沉积制备钴纳米线阵列

Porous anodic alumina (PAA) was used as a template to prepare Co nanowires array from 1-ethyl-3-methylimidazolium chloride ionic liquid by direct current method. The surface morphology of porous anodic alumina template was observed by field emission-scanning tunneling microscopy (FE-SEM) before and after the electrodeposition of Co nanowires. The electrodeposition of Co nanowires was characterized by transmission electron microscopy (TEM) and X-ray powder diffraction (XRD). TEM results indicate that the Co nanowire surface is coarse and porous when aqueous solution was used as electrolyte， and the Co nanowire deposited from the ionic liquid is uniform and smooth. XRD results show that the electrodeposition of Co is a mixture of crystal and microcrystal phase.     

聚丙烯酸-b-聚(N-异丙基丙烯酰胺)嵌段共聚物的合成及其温度和pH值敏感性自组装研究

通过原子转移自由基聚合方法, 在丁酮/异丙醇混合溶剂中合成了分子量可控和分布较窄的聚丙烯酸叔丁酯-b-聚N-异丙基丙烯酰胺(PtBA-b-PNIPAM)嵌段共聚物, 用GPC和 1 H NMR对其结构进行了表征. PtBA-b-PNIPAM在甲苯中水解得到聚丙烯酸-b-聚N-异丙基丙烯酰胺(PAA-b-PNIPAM). 用动态光散射技术对PAA-b-PNIPAM在水溶液中的自组装行为随pH值和温度变化的响应进行了初步研究.     

表面引发原子转移自由基聚合方法合成Fe3O4/PMMA复合纳米微粒

采用表面引发原子转移自由基聚合方法合成了核壳结构的磁性高分子纳米微粒. 作为聚合反应引发剂的3-氯丙酸, 首先与油酸修饰的Fe3O4纳米微粒表面的部分油酸置换, 然后在Fe3O4纳米微粒表面引发甲基丙烯酸甲酯聚合, 合成的纳米复合材料用TEM, FTIR, XRD和DSC表征. 磁性测试结果表明, 所制备的磁性高分子纳米微粒仍具有超顺磁性, 但由于聚合物的存在, 其饱和磁化强度降低.     

水+3-甲基吡啶+溴化钠三元溶液临界跨接现象

采用折射率法在较宽温度范围内研究了溴化钠、3-甲基吡啶和水的临界质量分数分别为0.240、0.192和0.568体系的临界性质, 发现在近临界点临界指数为0.365, 与Fishe重整化值一致. 有效临界指数随着温度逐渐远离临界点, 从0.365下降到0.20左右, 但当排除了“正规项”的影响后, 展现出向平均场理论值0.5单调跨接的行为.     

DSP在高精度数字式电机测速中的应用

在分析M法、T法,M/T法这三种基于数字脉冲计数的电机测速方法的基本原理及其误差根源的基础上,以TI公司的数字信号处理芯片TMS320LF2407A为核心,使用改进的M/T法,介绍了DSP(Digital Signal Processor)在电机测速中的应用,并给出了一种快速高精度数字式转速测量系统的软硬件实现方法.这种转速测量系统具有测速精度高、测速范围宽和测速精度与被测转速无关等优点,具有广阔的应用前景.     

玻璃与玻璃化转变

玻璃与玻璃态的应用极其广泛。玻璃化转变是一种典型的非晶液-固转变,当转变发生时体系的结构并没有明显变化,因而我们无法将其归类于已有的任何相变类型。作为凝聚态物理和软物质领域的核心问题,玻璃化转变的研究已有近70年的历史。然而,时至今日,人们还是无法回答玻璃态的本质是什么这一基本问题。本文简述了玻璃态的性质以及伴随玻璃化转变发生的一些基本物理现象,并总结了半个世纪以来一些与玻璃化转变相关的理论,以期加深读者对玻璃及玻璃化转变的认识。     

Chemical synthesis and characterization of manganese oxide coated Ni particles

Nanosized Ni particles with an average diameter of about 8 nm were prepared by reducing of NiCl 2 with sodium borohydride (NaBH 4 ) in aqueous solution. By moderate annealing in protective atmosphere, the composite grew up to be 15-20 nm particles. Both of the as-prepared and annealed Ni particles were coated by a layer of manganese oxide via decomposition reaction in aqueous KMnO4 solution. Hysteresis loops of as-prepared samples show a large increase in the magnetization with decreasing temperature and an unsaturated component at high magnetic field. In contrast, the ferromagnetic characteristics of annealed one are much stronger with large magnetization and coercivity. The thermomagnetic curves verified the coexistence of ferromagnetic Ni and antiferromangetic Mn oxide phases. But there exists no exchange bias behavior in the samples, even though the interface structure between the ferromagnetic Ni core and the antiferromagnetic manganese oxides has been distinctly formed. The absence of exchange bias probably originates from the weak ferromagnetic characteristic of Ni cores.     

TMT tertiary mirror axis calibration with laser tracker

A novel fiber Bragg grating(FBG)displacement sensor is proposed,which can achieve wide measuring range displacement detection with variable measurement precision due to its mechanical transfer structure of helical bevel gear.A prototype is designed and fabricated.The maximum detection displacement of this prototype is 1.751 m,and the precision grade changes from 0.2%to 6.7%.Through analyzing the experiment data which is obtained in the calibration experiment,the measuring range of this sensor is from 0 m to 1.532 m,and the wavelength shift errors between experiment data and theory calculation are all less than 5%.     

基于马氏随机场模型的空间近邻目标检测及量测划分

天基光学传感器对空间近邻目标的像平面跟踪过程中,传统方法在单帧恒虚警检测后进行量测划分,采用的虚警率过高可能引入较多的杂波点,过低则群目标在像平面的部分信息损失.在分析空间近邻目标在像平面特征的基础上,提出一种使用马氏随机场模型进行预检测处理然后以k-均值进行量测划分的方法,仿真结果表明,相比传统方法,基于马氏随机场模型的空间近邻目标检测及量测划分准确率更高,且在信噪比较低的情况下,性能改善明显.     

软分割约束边缘保持插值的半自动2D转3D

半自动2D转3D将用户标注的稀疏深度转换成稠密深度,是解决3D片源不足的主要手段之一.针对现有方法利用硬分割增强深度边缘引入误差的问题,提出像素点与超像素深度一致性约束的边缘保持插值方法.首先,建立像素点深度和超像素深度传播的能量模型,通过像素点与所属超像素间深度差异的约束项将二者关联起来;其次,利用矩阵表示形式将两个能量模型的最优化转换成一个稀疏线性方程组的求解问题.通过超像素提供的约束项,可避免深度传播穿过低对比度边缘区域,从而能保持对象边缘.实验结果表明,本文方法对象边缘处深度恢复的准确性优于融合图割的随机游走方法,PSNR改善了1.5dB以上.