高分子固载化Lewis酸催化剂——聚苯乙烯-三氯化铝/四氯化钛复合物

<正> 均相催化剂的固载化是目前催化剂研究方向之一。Skct等首次将BF_5和AlCl_3分别与苯乙烯反应制成高分子催化剂,对酯化、缩醛、缩酮等有机反应具有良好的催化作用。我们曾将四氯化钛与聚苯乙烯反应制成一种稳定复合物,有良好的催化效能。为了改进其重复使用性能,本文将等摩尔的AlCl_3,和TiCl_4的Lewis酸同时与聚苯乙烯交     

血橙中微量元素的测定

采用电感耦合等离子体原子发射光谱仪(ICP-AES),对血橙果肉汁、皮、籽中10种微量元素进行了测定。结果表明,血橙果肉汁、皮、籽中含有Ca、Mg、Fe、Zn、Mn、Cu、Ni等丰富的人体必需微量元素,且血橙果皮、籽中的微量元素含量普遍高于果肉汁中的微量元素的含量,这为血橙药效功能的进一步研究和资源综合开发利用提供一定的科学依据。     

EFFECT OF MOLECULAR WEIGHT OF PDMS ON MORPHOLOGY AND MECHANICAL PROPERTIES OF PP/PDMS BLENDS

 A series of polydimethylsiloxane (PDMS) with varied molecular weights (Mw = 3 &#61620; 106, 1 &#61620; 106 and 0.5 &#61620; 106) were melt blended with PP to investigate the effect of PDMS molecular weight (MW) on the morphology and mechanical properties of PP/PDMS blends. Scanning electron microscopic (SEM) examination showed that the size of PDMS domains was dependent on the MW of PDMS. It was found that the lower the value of PDMS MW, the better dispersion of the PDMS domains in the PP matrix. Tensile and Izod impact tests revealed that the addition of PDMS with lower MW would lead to a more significant increase in impact strength of the blends compared with the blends with higher MW ones, while the influence of the molecular weight on tensile strengths of the blends was relatively small in the MW range studied. Differential scanning calorimetry (DSC) results also showed that the crystallization temperature of PP was increased with decreasing PDMS MW, indicating a better nucleation capability of lower MW of PDMS. Melting flow rate (MFR) measurements indicated that the processibility of PP could be enhanced by adding PDMS, and again the lower MW PDMS resulted in better data. Our work demonstrates that not only the processibility but also the mechanical properties of PP could be enhanced to a more significant degree by using low MW PDMS than the higher ones.     

过碳酸钠-醋酸酐作用下的Baeyer-Villiger反应

在醋酸酐介质中, 过碳酸钠可以与酮进行Baeyer-Villiger反应, 将它们氧化成相应的酯。其中脂环酮的反应结果较好, 环内酯的产率约为80%。芳香酮除芳环被活化的以外, 效果欠佳。当反应施加超声辐射后可显著加快反应速度, 并对过碳酸钠的作用机理进行了讨论。     

A new anode material LiMoS2 for use in rechargeable Lithium Ion Batteries

The novel applications of molybdenum disulfide in recent research were reviewed, such as in lubricant, catalyst and photoelectrochemical solar cells. Recently, we found that LiMoS2 is a good candidate for new anode materials for lithium ion batteries with high lithium storage capacity.Here, the anode material LiMoS2 was synthesized by a hydrothermal method at 150℃ and the electrochemical characterization as an anode material for lithium ion batteries was examined.put in Teflon-lined stainless steel autoclaves of capacity 40 mL. Distilled water was used to fill the autoclaves to 70 % of the total volume. The autoclaves were maintained at 150℃ for 24 h and then cooled naturally. The resulting dark-gray powders were filled and washed with distilled water,diluted hydrochloric acid and ethanol, successively. The final products were dried at 80℃ for 24 h.The powder X-ray diffraction pattern showed the prepared LiMoS2 was amorphous structure. A test cell using LiMoS2 as the active material was discharged and charged between 3 and 0.01 V with respect to Li metal at a constant current density of C/5 (that is, one lithium per formula unit in 5 hours). During the first discharge, the potential rapidly drops to reach a large plateau at 2.2 V, then slowly drops to the other plateau at 0.8 V, and then continuously decreases down to 0.01V. There is only a plateau at 1.35 V in the subsequent discharge curves. The plateaus of charge potential appear at about 1.9 V.The irreversible loss was 41% in the first cycle. The ratio of discharge and charge is more than 99%in the subsequent cycles. Moreover, the ratio of discharge and charge almost reaches 100% after thedemonstrated that LiMoS2 has a very high capacity and a good cycle-ability as an anode material forlithium ion batteries.     

含有偏好的DEA-BWM评价方法研究

针对传统的DEA模型在评估过程中并未考虑决策者对相关指标权重的偏好,将最优最差方法(BWM)嵌入到传统DEA模型中,基于决策者偏好排序的判断矩阵,构建一种含有偏好的DEA-BWM评价方法。首先在保持传统DEA方法的优势基础上,构建了CCR-BWM评价模型对各DMU进行评价。同时考虑为了便于各决策单元在统一权重基础上相互比较,构建了CSW-BWM公共权重模型。另外考虑决策单元自评和互评,构建了NCE-BWM中立型交叉效率。然后采用min-max方法分别将上述三种多目标评价模型转换为单目标线性规划进行求解。最后,选择一组算例对三种模型的有效性与合理性进行验证。     

环戊二烯基氟尿嘧啶基钛（Ⅳ）、锆（Ⅳ）配合物的合成及其抗肿瘤活性的研究

用（ＲＣｐ）２ＭＣｌ２和（ＲＣｐ）ＴｉＣｌ３（Ｒ＝Ｈ，Ｍｅ；Ｍ＝Ｔｉ，Ｚｒ）分别与具有生物活性的２－甲氧基－５－氟尿嘧啶、２－甲硫基－５－氟尿嘧啶在甲苯溶剂中１１０℃下反应，合成了２０个未见报道的（ＲＣｐ）·Ｍ（Ｏｐｍ）２Ｃｌ、（ＲＣｐ）２Ｍ（ＯＰｍ）Ｃｌ和（ＲＣｐ）Ｍ（ＯＰｍ）Ｃｌ２（ＯＰｍ＝２－甲氧基－５－氟尿嘧啶基，２－甲硫基－５－氟尿嘧啶基）型钛锆配合物，这些配合物均经元素分析、１ＨＮＭＲ、ＩＲ光谱鉴定．初步动物试验表明，配合物１、４、１１、１４对小白鼠移植性艾氏腹水场的抑制作用居首，而配合物２、３、５、６、１２、１３、１５、１６次之，其它锆配合物几乎没有抑制作用。     

微波辅助-光催化降解氯酚的QSPR研究

本文运用PM3算法计算得到氯酚(CPs)的分子结构参数,并结合光解速率进行PLS分析,建立了速率与量子化参数之间的关系模型,模型的Q2cum分别为0.8776和0.9545(>0.5),具有良好的预测能力。研究结果表明,参数Ehomo、Elumo Ehomo、Elumo、N、Mw、Elumo-Ehomo、(Elumo-Ehomo)2是决定CPs光解速率的主要因素;CPs的光解速率随Ehomo、Elumo Ehomo、Elumo、Elumo-Ehomo、(Elumo-Ehomo)2的增大而增大,随N、Mw的增大而减小。     

利用“网包法”制备高效液相色谱大环抗生素类手性固定相

万古霉素和替考拉宁都属于糖肽类的大环抗生素，具有立体的环状结构和多个手性中心，是两种常见的手性识别材料，广泛应用于对映体的色谱手性分离分析。该文以万古霉素和替考拉宁为手性选择剂，哌嗪为单体，4，4'-二苯基甲烷二异氰酸酯（MDI）、1，6-己二异氰酸酯（HDI）和2，4-甲苯二异氰酸酯（TDI）为交联剂，通过界面聚合反应形成网状层包裹硅胶载体的方法制得6种高效液相色谱手性固定相，用于分离外消旋化合物，并与MDI直接交联万古霉素和替考拉宁在硅胶表面所得固定相进行了比较。结果表明，利用"网包法"和直接交联法制备的手性柱与商品万古霉素和替考拉宁柱之间具有互补性，均对不同的外消旋体有不同程度的拆分。