吸电子取代基(2-硝基)金属卟啉的轴向加合反应的研究

本文报道了用电子吸收光谱和电化学方法系统地研究卟啉环上具有吸电子取代基(—NO_2)的四苯基卟啉[H_2TP(2-NO_2)P]的Zn、Ni、Cu、Co、Mn、Fe的配合物与一系列含N有机碱的加合作用,测定了加合常数、加合分子数,总结了吸电子基团对金属卟啉的轴向效应以及中心金属离子和卟啉环氧化还原性的影响。     

A new anode material LiMoS2 for use in rechargeable Lithium Ion Batteries

The novel applications of molybdenum disulfide in recent research were reviewed, such as in lubricant, catalyst and photoelectrochemical solar cells. Recently, we found that LiMoS2 is a good candidate for new anode materials for lithium ion batteries with high lithium storage capacity.Here, the anode material LiMoS2 was synthesized by a hydrothermal method at 150℃ and the electrochemical characterization as an anode material for lithium ion batteries was examined.put in Teflon-lined stainless steel autoclaves of capacity 40 mL. Distilled water was used to fill the autoclaves to 70 % of the total volume. The autoclaves were maintained at 150℃ for 24 h and then cooled naturally. The resulting dark-gray powders were filled and washed with distilled water,diluted hydrochloric acid and ethanol, successively. The final products were dried at 80℃ for 24 h.The powder X-ray diffraction pattern showed the prepared LiMoS2 was amorphous structure. A test cell using LiMoS2 as the active material was discharged and charged between 3 and 0.01 V with respect to Li metal at a constant current density of C/5 (that is, one lithium per formula unit in 5 hours). During the first discharge, the potential rapidly drops to reach a large plateau at 2.2 V, then slowly drops to the other plateau at 0.8 V, and then continuously decreases down to 0.01V. There is only a plateau at 1.35 V in the subsequent discharge curves. The plateaus of charge potential appear at about 1.9 V.The irreversible loss was 41% in the first cycle. The ratio of discharge and charge is more than 99%in the subsequent cycles. Moreover, the ratio of discharge and charge almost reaches 100% after thedemonstrated that LiMoS2 has a very high capacity and a good cycle-ability as an anode material forlithium ion batteries.     

全硅MCM-41担载的加氢脱硫催化剂的TPR研究

用TRP技术研究了以全硅MCM-41(Si-MCM-41)和HNO3交换的全硅MCM-41(H-MCM-41)为载体制备的Ni-Mo、Co-Mo和Ni-W加氢脱硫(HDS)催化剂的还原性能，并以0．8(wt)％二苯并噻吩(DBT)的十氢萘溶液为模型化合物，在高压固定床反应器上考察了上述催化剂的加氢脱硫(HDS)反应性能。结果表明，Si-MCM-41经稀HNO3交换后，所担载的Ni-Mo和Ni-W催化剂还原性能、HDS活性和加氢活性有显著变化，但对Co-Mo催化剂影响不大。这说明在Ni-Mo／H-MCM-41和Ni-W／H-MCM-41中可能存在氢溢流现象，DBT的HDS活性与载体表面酸性和氢溢流有关。     

超离子导体CaF2中的Ca2+亚晶格和F-亚晶格

CaF_2在熔化以前为超离子导体相。一些实验和理论的研究表明,在超离子导体相中,Ca~(2+)仍维持原有的面心立方骨架,而F~-则在Ca~(2+)骨架中运动。早期的分子动力学模拟结果表明Ca~(2+)的均方根位移仅约0.3A,而F~-的扩散系数可达2.6×10~(-5)cm·s~(-1),已是熔盐扩散系数量级。近年来的中子散射实验表明在扩散离子和近邻离子间存在着某种动力学相关。为解释这些事实,新近Gillan的分子动力学模拟表明扩散离子伴随着F~-亚晶格变形,而Kaneko和Ueda的分子动力学模拟则表明扩散离子伴随着近邻离子在同一运动方向的相关运动。进一步的研究尚待进行。八十年代初,Nelson等人提出了描述晶体、非晶和液态中键取向的键球谐函数方法。     

蜜蜂外激素9－ODA和9－HDA的合成

６－溴－２－己酮在Ｌｉ２ｃｕＣｌ４催化下与γ－溴代巴豆酸甲酯进行格氏偶联，合成了蜂王物质９－羰基－（Ｅ）－２－癸烯酸（９－ＯＤＡ），将其还原得到另一蜂王物质９－羟基－（Ｅ）－２－癸烯酸（９－ＨＤＡ）。该法是合成９－ＯＤＡ和９－ＨＤＡ的新路线。     

Microfluidic synthesis of high-valence programmable atom-like nanoparticles for reliable sensing

Synthesis of programmable atom-like nanoparticles (PANs) with high valences and high yields remains a grand challenge. Here, a novel synthetic strategy of microfluidic galvanic displacement (μ-GD) coupled with microfluidic DNA nanoassembly is advanced for synthesis of single-stranded DNA encoder (SSE)-encoded PANs for reliable surface-enhanced Raman scattering (SERS) sensing. Notably, PANs with high valences (e.g., n-valence, n = 12) are synthesized with high yields (e.g., >80%) owing to the effective control of interfacial reactions sequentially occurring in the microfluidic system. On the basis of this, we present the first demonstration of a PAN-based automatic analytical platform, in which sensor construction, sample loading and on-line monitoring are carried out in the microfluidic system, thus guaranteeing reliable quantitative measurement. In the proof-of-concept demonstration, accurate determination of tetracycline (TET) in serum and milk samples with a high recovery close to 100% and a low relative standard deviation (RSD) less than 5.0% is achieved by using this integrated analytical platform.

A novel synthetic strategy is presented for microfluidic preparation of programmable atom-like nanoparticles with high valences and high yields.     

一类新的毛细管气相色谱固定液—侧链液晶冠醚聚硅氧烷的研究

合成了一种新的毛细管气相色谱用固定液——侧链含冠醚液晶的聚硅氧烷,这种固定液易于涂渍在弹性石英毛细管柱上,柱效高,热稳定性好,极性中等,它具有高分子液晶和高分子冠醚固定液的双重保留性能,适于分离多种异构体。     

q-Hypergeometric Series and Macdonald Functions

We derive a duality formula for two-row Macdonald functions by studying their relation with basic hypergeometric functions. We introduce two parameter vertex operators to construct a family of symmetric functions generalizing Hall-Littlewood functions. Their relation with Macdonald functions is governed by a very well-poised q-hypergeometric functions of type ₄₃, for which we obtain linear transformation formulas in terms of the Jacobi theta function and the q-Gamma function. The transformation formulas are then used to give the duality formula and a new formula for two-row Macdonald functions in terms of the vertex operators. The Jack polynomials are also treated accordingly.     

一种拼接结构红外探测器的封装电学设计

随着红外焦平面探测器技术日趋成熟,由多片红外探测器组成更大规模探测器的需求也更为广泛。红外探测器往往采用多片拼接结构,达到扩大探测器阵列规模的目的。从2×2,3×3到4×4甚至更大规模的拼接结构,其拼接设计的核心均为封装结构设计。在封装结构设计中,如何进行电学引出设计,也是设计中非常重要的一个环节。文章介绍了一种红外探测器拼接结构的封装电学设计,首先介绍拼接结构的概况,然后介绍为满足该种结构的电学设计采用的结构方案,最后介绍针对该种电学设计结构方案进行的电学布线设计。