Photoconductive Terahertz antenna with radial symmetry

It has been demonstrated recently that it is possible to guide broadband Terahertz pulses utilising a novel coaxial waveguide. This technique is hindered by the difficulty in exciting the radially polarised fundamental mode of the waveguide. To optimise mode matching, a novel radially symmetric photoconductive Terahertz antenna is proposed. Using finite element method simulations and analytical calculations, it is shown that this antenna can generate the desired radial polarisation.     

Investigation of multicomponent fluoride optical materials in the UV spectral region: I. Single crystals of Ca1−x R xF2+x (R = Sc, Y, La, Yb, Lu) solid solutions

Crystalline materials that are transparent in the vacuum UV spectral region and currently used have been reviewed. Transmission of crystals of solid solutions with the fluorite structure Ca_1?x R _xF_2+x (R = Sc, Y, La, Yb, Lu) in the UV and vacuum UV spectral regions has been investigated. It is shown that application of different methods of purification of fluorides from some impurities can significantly improve the optical quality of fluoride multicomponent crystals in the short-wavelength spectral region.     

Nanolayered lightweight flexible shields with multidirectional optical transparency

New nanolayered coatings are designed and deposited on flexible plastic substrate having the thickness of 100 /spl mu/m, in order to realize lightweight ultrathin transparent shielding foils. The structure of the coating is optimized considering three figures of merit: the average transmittance in the visible range for normal incidence, the normalized average transmittance for oblique incidence at 550 nm, and the transmittance quality factor. The nanotechnology exploited for the deposition of the transparent metals is the dual ion beam sputtering. Tests of durability, optical transmission, and shielding effectiveness demonstrate that the film has a high adhesion under mechanical solicitation, high resistance against aging, peak transmittance in the visible range higher than 70%, omnidirectional properties in the range 0/spl deg/-60/spl deg/, and shielding effectiveness of 40 dB up to 6 GHz.     

Simulation of viscous water column collapse using adapting hierarchical grids

An adaptive hierarchical grid‐based method for predicting complex free surface flows is used to simulate collapse of a water column. Adapting quadtree grids are combined with a high‐resolution interface‐capturing approach and pressure‐based coupling of the Navier–Stokes equations. The Navier–Stokes flow solution scheme is verified for simulation of flow in a lid‐driven cavity at Re=1000. Two approaches to the coupling of the Navier–Stokes equations are investigated as are alternative face velocity and hanging node interpolations. Collapse of a water column as well as collapse of a water column and its subsequent interaction with an obstacle are simulated. The calculations are made on uniform and adapting quadtree grids, and the accuracy of the quadtree calculations is shown to be the same as those made on the equivalent uniform grids. Results are in excellent agreement with experimental and other numerical data. A sharp interface is maintained at the free surface. The new adapting quadtree‐based method achieves a considerable saving in the size of the computational grid and CPU time in comparison with calculations made on equivalent uniform grids. Copyright © 2005 John Wiley & Sons, Ltd.     

The thermodynamic characteristics of formation of vacancies in carbon subgroup element crystals

A method for calculating the parameters of formation of vacancies in crystals formed by spherically symmetrical atoms was developed. Both quantum effects at low temperatures and the possibility of the delocalization of atoms at high temperatures were studied. The parameters of formation of vacancies in carbon subgroup element crystals C-diam, Si, Ge, α-Sn, and Pb were calculated. The inclusion of the delocalization of atoms was shown to increase the enthalpy, entropy, and volume of vacancy formation. At low temperatures, the parameters of vacancy formation were found to depend strongly on the temperature, and the entropy of vacancy formation became negative. At high temperatures, close agreement with experimental data and theoretical estimates reported by other authors was obtained. The temperature dependence of vacancy parameters was studied for diamond heated isobarically from 100 to 4500 K. The applicability scope of the Arrhenius equation with a temperature-independent activation energy is discussed. The validity of the “compensation rule” (correlation between the entropy and enthalpy of vacancy formation) was demonstrated. It was also shown that the volume and entropy of vacancy formation were correlated over the whole temperature range studied.

     

Vascular morphology by three-dimensional magnetic resonance imaging

A three-dimensional examination of blood vessels is provided using MR data from seven cases. The vascular surfaces are constructed with an algorithm that automatically follows the selected artery or vein and generates a projected three-dimensional gradient shaded image. Fast 3DFT pulse sequences were optimized to enhance the time-of-flight contrast of the intravascular region. By increasing the surface threshold value in a three-dimensional head study, the flesh of a patient's face was peeled away to demonstrate the superfacial temporal artery. Gated cardiac images show the great vessels and cardiac chambers. A three-dimensional view of the aorta shows an irregular surface in the vicinity of an adrenal tumor. 3D MR exams provide a non-invasive technique for assessing vascular morphology in a clinical setting.     

K X-ray production cross sections for 40-180 keV protons

Considering the importance of the X-ray production cross sections for the determination of the element concentrations in a given material, we have measured them experimentally for Al Si, Sc, Ti, V, Fe, Co, Ni and Cu bombarded by protons with energies ranging from 40 to 180 keV. This revised version was published online in July 2006 with corrections to the Cover Date.     

High-gain pseudomorphic InGaAs base ballistic hot-electron device

A high-gain ballistic hot-electron device is described. The GaAs-AlGaAs heterostructure device, with a 21-mm-thick pseudomorphic In _0.12Ga_0.88As base, had a current gain of 27 at 77 K and 41 at 4.2 K. As characteristically seen in ballistic devices, transfer into the L valley limited the maximum gain. The Γ-L valley separation in the strained In_0.12Ga_0.88As was estimated to be about 380 meV