Monte Carlo study of interfacial silicon suboxide layers and oxidation kinetics

A simple simulation scheme that simultaneously describes the growth kinetics of SiO₂ films at the nanometer scale and the SiO_x/Si interface dynamics (its extent, and spatial/temporal evolution) is presented. The simulation successfully applies to experimental data in the region above and below 10 nm, reproduces the Deal and Grove linear-parabolic law and the oxide growth rate enhancement in the very thin film regime (the so-called anomalous region). According to the simulation, the oxidation is governed mainly by two processes: (a) the formation of a transition suboxide layer and (b) its subsequent drift towards the silicon bulk. We found that it is the superposition of these two processes that produces the crossover from the anomalous oxidation region behavior to the linear-parabolic law.     

Synthesis and characterisation of cadmium titanium oxide thin films by sol-gel technique

Crack free, dense and transparent CdTiO₃ thin films have been prepared by sol-gel technique using titanium butoxide and cadmium acetate. The formation of the CdTiO₃ phase started from 500°C annealing temperature onwards. The complete orthorhombic structure of CdTiO₃ was formed on Silicon (100) substrate at an annealing temperature of 600°C for 5 h. As the annealing temperature increased from 600 to 700°C, we have observed the cadmium silicate phase at the interface of Si and CdTiO₃ phase. Structural, morphological and elemental evolution of these CdTiO₃ thin films produced by sol-gel synthesis were characterised by grazing incidence X-ray diffraction (GIXRD), tapping mode atomic force microscopy (TMAFM), scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) respectively.     

A priori tests of a stochastic mode reduction strategy

Several a priori tests of a systematic stochastic mode reduction procedure recently devised by the authors [Proc. Natl. Acad. Sci. 96 (1999) 14687; Commun. Pure Appl. Math. 54 (2001) 891] are developed here. In this procedure, reduced stochastic equations for a smaller collections of resolved variables are derived systematically for complex nonlinear systems with many degrees of freedom and a large collection of unresolved variables. While the above approach is mathematically rigorous in the limit when the ratio of correlation times between the resolved and the unresolved variables is arbitrary small, it is shown here on a systematic hierarchy of models that this ratio can be surprisingly big. Typically, the systematic reduced stochastic modeling yields quantitatively realistic dynamics for ratios as large as 1/2. The examples studied here vary from instructive stochastic triad models to prototype complex systems with many degrees of freedom utilizing the truncated Burgers–Hopf equations as a nonlinear heat bath. Systematic quantitative tests for the stochastic modeling procedure are developed here which involve the stationary distribution and the two-time correlations for the second and fourth moments including the resolved variables and the energy in the resolved variables. In an important illustrative example presented here, the nonlinear original system involves 102 degrees of freedom and the reduced stochastic model predicted by the theory for two resolved variables involves both nonlinear interaction and multiplicative noises. Even for large value of the correlation time ratio of the order of 1/2, the reduced stochastic model with two degrees of freedom captures the essentially nonlinear and non-Gaussian statistics of the original nonlinear systems with 102 modes extremely well. Furthermore, it is shown here that the standard regression fitting of the second-order correlations alone fails to reproduce the nonlinear stochastic dynamics in this example.     

Luminescent properties of Ce in MSO4 (M: Ca, Sr and Ba) and the effect of Na co-doping

The optical properties of Ce³⁺ in CaSO₄, SrSO₄ and BaSO₄ are reported. The Ce³⁺ ion shows 4f⁰5d¹→²F_5/2,²F_7/2 luminescence in all three sulphates. Co-doping with Na⁺ does not change the local surrounding of the Ce³⁺ ion, but enhances the amount of Ce³⁺ ions built in. Under optical excitation, besides the typical Ce³⁺ doublet emission in the ultraviolet spectral region, band emission around 445 nm was observed. This band emission was not assigned to emission from a Ce³⁺ centre, but to emission from an impurity-trapped exciton. Under X-ray excitation, both Ce³⁺ emission and an emission band around 380 nm was observed. This band was assigned to emission from a self-trapped exciton.     

Mass transport in metals under intensive impulse reactions

An unusually high mobility of atoms under intensive impulse reactions is explained by the behavior of point defects at the shock wave front. It is shown that either a shock wave front or moving dislocations can capture the interstitials, or they can be thermally activated in the direction of the shock wave propagation.     

A compact LTCC-based Ku-band transmitter module

Presents design, implementation, and measurement of a three-dimensional (3-D)-deployed RF front-end system-on-package (SOP) in a standard multi-layer low temperature co-fired ceramic (LTCC) technology. A compact 14 GHz GaAs MESFET-based transmitter module integrated with an embedded bandpass filter was built on LTCC 951AT tapes. The up-converter MMIC integrated with a voltage controlled oscillator (VCO) exhibits a measured up-conversion gain of 15 dB and an IIP3 of 15 dBm, while the power amplifier (PA) MMIC shows a measured gain of 31 dB and a 1-dB compression output power of 26 dBm at 14 GHz. Both MMICs were integrated on a compact LTCC module where an embedded front-end band pass filter (BPF) with a measured insertion loss of 3 dB at 14.25 GHz was integrated. The transmitter module is compact in size (400 /spl times/ 310 /spl times/ 35.2 mil/sup 3/), however it demonstrated an overall up-conversion gain of 41 dB, and available data rate of 32 Mbps with adjacent channel power ratio (ACPR) of 42 dB. These results suggest the feasibility of building highly SOP integrated RF front ends for microwave and millimeter wave applications.     

Dielectric and conductivity relaxations in quaternary ammonium polymer

Ionic conductivity of dry quaternary ammonium polymer, polydiallyldimethylammonium with Cl⁻ and H₂PO₄⁻ counter ions was studied in a wide range of frequencies (10⁻²-10⁷ Hz) and temperatures (300-470 K). The data were analysed within the formalism of permittivity. WAXS, and thermal properties of this polymer were investigated prior to conductivity measurements.     

Dynamic reflection holograms in CdF2 crystals with bistable centers

The diffraction efficiency and the recording and relaxation times of dynamic reflection holograms, recorded in CdF₂ crystals with bistable centers are studied experimentally in the temperature range 20–100°C. In the model experiments which measured the quality of the wave reflected from the hologram, the dynamic wavefront distortions are demonstrated to be efficiently compensated using a holographic corrector based on these crystals. CdF₂ crystals with bistable centers are likely to be useful in solving problems of correction of laser light wavefront and image correction in observation telescopes with nonideal primary mirrors.     

A Symbolic Pole/Zero Extraction Methodology Based on Analysis of Circuit Time-Constants

This paper introduces a methodology for symbolic pole/zero extraction based on the formulation of the time-constant matrix of the circuits. This methodology incorporates approximation techniques specifically devoted to achieve an optimum trade-off between accuracy and complexity of the symbolic root expressions. The capability to efficiently handle even large circuits will be demonstrated through several practical circuits.